* Refactor jj40 in line with current ps2avrgb template
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* Add backlight pwm bodge till #4324 lands
* Increase planck keymap compatibility
* use pragma once
* modified readme with maintainer info
* remove rev1 for the time being
* QMK Configurator support for 60_ansi and 60_ansi_split_bs_rshift
* add hhkb layout and QMK Configurator support
* fix compile issue due to missing DEVICE_VER
* use a saner and less complicated default layout
* remove unused file
* fix up LAYOUT_all and formatting along with QKM Configurator support
* turn on bootmagic lite as the hardware reset switch isn't in a standard position
* remove default folder
* Added Waldo keyboard base files and default keymap
* Updated Waldo files and added keymap for split shift and split backspace
* Updated meta-data for the Waldo board
* Apply suggestions from code review
Committing suggestions for real this time.
Co-Authored-By: That-Canadian <Poole.Chris.11@gmail.com>
* Made suggested changes that were not explicitly made.
* Add keyboard Signum 3.0 for the elite-c
* Update readme.md
* Remove unused macros
* Use bootmagic lite instead of full
* Add warning to keymap.c that it's auto-generate
* Add description for customizing keyboard layouts
* Make generate_km.py executable
* Make right shift available in numpad layer
* Update keyboards/signum/3_0/elitec/readme.md
Co-Authored-By: jceb <jceb@e-jc.de>
* Update keyboards/signum/3_0/elitec/readme.md
Co-Authored-By: jceb <jceb@e-jc.de>
* Fix typo in symbol name
* remove dependency on custom i2c code
* missed a pragma once
* fix readme install instructions
* config.h cleanup
* make the bootmagic key not the same bmc reset key
* disable bootmagic functionality as it doesn't seem to work on atmega32a bmc boards
* remove custom i2c code in favor of QMK i2c_master
* clean up config file
* fix pyusb install instructions
* fix naming in usbconfig.h
* disable bootmagic as it does not work for bmc boards
* Update macros and keycode handling
- Update NUBS_Z macro so it repeats when held down
- Number row now uses numpad keycodes if Right Alt is being held
- coding conventions and formatting update
- switched to four-space indent
- reformatted a block comment
* Update readme files
* remove unneeded uart setting
* use pragma once everywhere
* remove custom matrix support
* fixup readme
* set bootmagic to lite
* remove dependency on custom i2c code
* use the right header files and function calls
* On i2c_init, enable two wire interface, twi interrupt, and slave
address ACK along with pull up resistors.
* thanks to some testing by drashna, we know that setting TWI doesn't work for all boards. Putting the new code into an ifdef block
* Add new keyboard: NQG
* Delete .gitignore
.gitignore removed
Originally used to ignore .DS_Store files from being committed.
* Changed Maintainer information
Maintainer link now points to a github account.
* Add customizable tapping terms
* Add Documentation
* Fix function
* Fixes
* It's not a pointer
* Add debugging output
* Update documentation to be at least vaguely accurate
* Use `get_tapping_term(tapping_key.event)` instead
`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.
However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use.
In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h
* Use variable tapping term value rather than define
* Silly drashna - tapping_key.event, not event
* add get_event_keycode() function
* Fix typo
Co-Authored-By: drashna <drashna@live.com>
* Remove post_process_record_quantum since it's the wrong PR
* Update quantum/quantum.c
Co-Authored-By: drashna <drashna@live.com>
* Better handle ifdef statement for permissive hold
Since we can't be sure that tapping term is actually 500
* Update quantum.c comments based on feedback
* Clean up get_tapping_term function
Clean up function so that users don't need to call the event function, and instead only check the keycode
* Add ability to run functionality on and off
* Make ifdef's more compact
* initial commit of budget96
* non logic changes
* add my name to readme
* update matrix.c
* make the matrix representation of the layout macro
* fix up LAYOUT macro
* add missing character
* initial keymap commit
* put KC_NO where they belong
* basic keymap
* fix matrix row and col definition
* The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues
* update the readme
* change up manufacturer for budget96
* update copyright date
* fix up the switch matrix and provide a keymap
* forgot the keymap
* other matrix fixes
* missing a few keys in the switch matrix
* messed up the row tracing
* tweak keymap a bit
* use a lower case k
* fix spacing for markdown rendering
* put in the reset key documentation
* clean up the file a little
* use LAYOUT_96_ansi
* add a second layer for lighting controls
* add in lighting support
* add QMK Configurator support
* use pragma once
* remove un needed matrix.c
* convert to GPIO methods
* turn on rgblight_enable and get rid of custom matrix
* set bootloadhid_bootloader to 1
* set bootmagic to lite and set it to k50
* add reset information to readme
* use i2c_master instead of custom i2c
* restore the custom i2c code
* introduce reset key and eep_rst in function layer 1
* fix up pip3 install commands
* fix up device and manufacturer names
* remove un needed comments
* add an ALL layout macro along with QMK Configurator support
* move budget96 into donutcables directory since he actually has different boards
* add a short donut cables blurb taken from his website
* update readme for make instructions to point to the new path
* Update keyboards/donutcables/budget96/config.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/info.json
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* turn on backlight
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* remove extra UART and BOOTLOADER settings that are not needed
* Added first configuration for handwired hacked motosped keyboard
* Added first keymap
* Fixed h file key layout
* Swapped Y and Z in default keymap
* Added name, email and description
* Moved hacked motospeed keyboard to handwired
* Changed make command in readme
* Formatted readme to be displayed properly with markdown
* Formatted keymap and layout to better reflect the physical keyboard
* Fixed info.json
* Update keyboards/handwired/hacked_motospeed/info.json
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Removed .directory from .gitignore
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Minor changes and cleanup
* Update keyboards/handwired/hacked_motospeed/hacked_motospeed.h
Added back newline needed for properly parsing
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Adding new keymap folder for goadmaster
* add switch break
* zeal60 rgb backlight files
* modified for red caps lock key
* Remove return statement
* Files removed
* Add new RGB options
* Back to original file
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* Initial portover of the doro68.json with corrected column pins.
* Initial setup of LAYOUT_ansi and it's use in the default keymap.
* Added F keys to default kemap on layer 1.
* Added split space (and everything else) layout and a base keymap to be updated.
* Renamed split_space to multi.
* Changed product_id for doro.
* Created a basic doro LAYOUT_iso and default keymap.
* Copied over basic layout and keymap.
* Added readme.md for doro67 multi.
* Removed basic keyboad layout and keymap because it's a separate PCB.
* Added backlight controls to the various keymaps.
* Added explicit backlight pin define.
* Increased number of backlight levels for flexibility.
* Removed unnecessary line slashes and unified keymcaps.
* Corrected ISO layout and switched position with multi.
* Added keymap readme.md files.
* Corrected ISO keymap.
* Added Layouts to info.json for toolbox.
* Re-added slashes as they were necessary here...
* Corrected info.json/keymap discreptancies.
* Updated copyright messages (and fixed small readme error).
* Added missing line break spaces in readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Small alignment adjustment on the default keymap readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* use pragma once where applicable
* remove ?
* update default keymap readme
* remove un need include
* update readme with newbs guide
* set underglow and backlight to be on by default, and explicitly set them to no for the default keymap to handle the non Polestar case.
* put mine and benlyall's name in the code
* update readme
* port Massdrop CTRL/ALT to use RGB Matrix
Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>
* Massdrop lighting support working
This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.
* Updating config based on testing results with patrickmt & compile errors
* Updates for PR5328
For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.
* remove prilik keymap form PR
* Implemented Eager Per Row debouncing algorithm.
Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical)
* Added documentation for eager_pr
* Ported ergodox_ez to eager_pr debouncing.
* Removed check for changes in matrix_scan.
* Added further clarification in docs.
* Accidental merge with ergodox_ez
* Small cleanup in eager_pr
* Forgot to debounce_init - this would probably cause seg-faults.
* first [ass at pulling out common duck library functions
* use new library in jetfire
* use new library in duck lightsaver
* use new library in octagon v2
* put Device into the library
* refactor send_value
* refactor send_value and send_color
* use pragma once
* use pragma once
* use pragma once
* use pragma once
* rename backlight_led to indicator_leds to match with other duck boards
* rename enum
* make #define names consistent
* rename ducklib to duck_led
* update rules.mk ?= to =
* put rgb in the correct order
* add debounce debugging printouts
* turn on bootmagic lite and set it to the top left most key commonly programmed as Escape
* add reset key documentation
* fix that typo
* Update keyboards/duck/duck_led/duck_led.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* include the correct library
* initial commit
* get rid of some of the vanilla cookie cutter code
* Put in the matrix size and the pins
* add LAYOUT macro and a suitable keymap
* Add QMK Configurator support
* set bootmagic to lite
* put a RESET key into the default keymap
* edit kyuu readme file for description and quantrik.com link
* Update keyboards/quantrik/kyuu/config.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* fix captilization of keyboard name
* fix keymap wrapping issue and add MO key
* preserve RESET key location
* use one of the macros
Takeshi ISHII