3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
14 years ago
93793679c9
Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
14 years ago
a447ae134f
Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.
14 years ago
824ce10390
Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used.
14 years ago
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
14 years ago
d36c96d6a5
Oops - revert changes to the Device mode Class Driver VirtualSerial demo makefile.
14 years ago
d06febbb59
Fix device mode for the U4 parts.
14 years ago
383d167125
Whitespace corrections.
...
Make Printer Host mode Class driver interface descriptor search routine pre-cast the current interface descriptor to simplify the value checks.
14 years ago
a1e453e900
Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device.
14 years ago
86367574e6
Fix incorrectly named configuration descriptor callback routines in the host mode class drivers.
...
Fix typo in MIDI low level device demo.
14 years ago
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
14 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
14 years ago
c0e4f52e8f
Fix up incorrect version numbers in demo/project descriptors.
...
Add class name prefixes to missed constants in the class drivers to give all class driver elements a consistent namespace.
14 years ago
25d896a507
Added board hardware driver support for the Arduino Uno development board.
...
Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.
14 years ago
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
14 years ago
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
14 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
14 years ago
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
14 years ago
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
14 years ago
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
14 years ago
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
14 years ago
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
14 years ago
1621158c62
Fix warning when not compiled for UID auto-selection mode.
14 years ago
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
14 years ago
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
14 years ago
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
14 years ago
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
a0f9192568
Minor documentation corrections.
14 years ago
546ab8712e
Fix board name redefinition in BoardTypes.h (thanks to Daniel Czigany).
14 years ago
e61345f872
Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2.
14 years ago
84696c727d
Added board hardware driver support for the BUI development board.
14 years ago
92059fcbf9
Added board hardware driver support for the UDIP development board.
14 years ago
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
14 years ago
def0e0ff1b
Remove incomplete MIDIToneGenerator project.
14 years ago
d975250331
Add the "REQ_" prefix to the DFU class bootloader class-specific request constants.
14 years ago
6b59c9b834
Minor documentation phrasing changes.
14 years ago
12fb68ea1f
Added PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the Host mode Printer Class driver.
...
Modified PRNT_Host_USBTask() to flush the output pipe on each call.
15 years ago
41c1fb3843
Added new project makefile template to the library and moved board driver stub files into in a new CodeTemplates directory.
15 years ago
fdcb486e22
Fix typos in the project overview text files.
15 years ago
4c49ee6885
Whitespace corrections.
15 years ago
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
15 years ago
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
15 years ago
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
15 years ago
6e011f88d9
Must save and restore the endpoint/pipe interrupt enable flags during reconfiguration of all endpoints/pipes in the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() routines.
15 years ago
ebdb1b37ca
Fix bug in Pipe_ConfigurePipe() breaking already configured pipes that was accidentally clearing the pipe's IN mode.
15 years ago
Dean Camera