158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
14 years ago
25d896a507
Added board hardware driver support for the Arduino Uno development board.
...
Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.
14 years ago
b2a30cd48a
Added CDC functional descriptor structs to the Low Level CDC demos and CDC class bootloader, to improve the readability of the descriptors.
...
Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev).
14 years ago
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
14 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
14 years ago
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
14 years ago
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
14 years ago
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
e61345f872
Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2.
14 years ago
84696c727d
Added board hardware driver support for the BUI development board.
14 years ago
92059fcbf9
Added board hardware driver support for the UDIP development board.
14 years ago
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
14 years ago
12fb68ea1f
Added PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the Host mode Printer Class driver.
...
Modified PRNT_Host_USBTask() to flush the output pipe on each call.
14 years ago
41c1fb3843
Added new project makefile template to the library and moved board driver stub files into in a new CodeTemplates directory.
14 years ago
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
14 years ago
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
14 years ago
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
14 years ago
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
14 years ago
0174d8ea70
Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.
14 years ago
21954179a4
Added board hardware driver support for the USBFOO development board.
14 years ago
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
14 years ago
b7b8a9edfa
Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.
14 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
14 years ago
e72f424f64
Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.
14 years ago
4cc7f5200b
Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will not break communications with the host by exceeding the maximum control request stage timeout period.
14 years ago
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
14 years ago
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
14 years ago
95079868bb
Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger).
14 years ago
ad4308b1d1
Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
14 years ago
4f114e5766
Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger).
...
Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant SCSI_Codes.h file as these values are part of the MassStorage Class Driver.
14 years ago
f4de17207e
Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist within the supplied report of a multiple report HID device.
14 years ago
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
14 years ago
be520aed52
Add notification endpoint to the incomplete TMC demo.
14 years ago
9274610a48
Commit for the 100807 release.
14 years ago
3c72896e84
Fixed software application start command broken in the DFU class bootloader when dfu-programmer is used due to application start address corruption.
14 years ago
98947e3750
Ensure all demos now compile in C99 standards mode, and not GNU99 (C99 + GNU extensions).
14 years ago
9597b33c33
Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation to occur (thanks to Bob Paddock).
14 years ago
612df774d9
Oops - fix mixed "initialize" and "initialise" - opt for American spelling due to its wide use in technical standards.
14 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
14 years ago
37c601dbf6
Fix typo in DualVirtualSerial.c due to the changed CDC Device APIs that was preventing the demo from being compiled.
14 years ago
24e621a8d8
Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by a negative return value.
...
Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
14 years ago
ca007f91f2
Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect operation to occur (thanks to Bob Paddock).
14 years ago
62022252ea
Add special support to the AVRISP-MKII for the new model USBTINY-MKII's additional LED to indicate target power source.
...
Add support to the USBTINY-MKII's additional LED in the board's LED driver header.
Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED.
14 years ago
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
14 years ago
Dean Camera