70f3d8e933
Add support for the Paranoid Studio USB2AX boards (hardware revisions 1-3).
14 years ago
e915d968a5
Added new USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions.
14 years ago
4f223302b1
Oops: Typo on the new TEENSY2 board support.
14 years ago
a81ccd83fd
Added support for version 2 of the Teensy boards (thanks to Christoph Redecker).
14 years ago
e30be658c9
Add missing SVN eol-style property to ensure that source code line endings and converted to the native values on checkout.
14 years ago
0ad6f1fb53
Add partial support for the Atmel A3BU Xplained's Dataflash IC (physical USART-as-SPI transport driver still pending).
14 years ago
00ad509061
Add support for the Atmel XMEGA A3BU Xplained board.
...
More XMEGA USB core fixes.
14 years ago
77dbfd3cc4
Add missing "used" attribute to ATTR_INIT_SECTION to ensure functions declared with that meta-attribute are not discarded by the linker.
...
Add missing function and definition documentation.
14 years ago
022fa26b43
Fix missing C++ linkage command in ArchitectureSpecific.h.
...
Fix missing closing brace in an Endpoint function for the UC3 targets.
14 years ago
413438eb23
Add new TWI_BITLENGTH_FROM_FREQ() macro to the AVR8 TWI peripheral driver.
...
Change Delay_MS() to accept a 16-bit parameter rather than an 8-bit parameter for longer possible delays.
Minor documentation improvements.
14 years ago
a233109909
Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device, and not a Pipe within the host.
...
Updated MS_Host_ResetMSInterface() to now perform a full Mass Storage reset sequence to prevent data corruption in the event of a device lock up or timeout (thanks to David Lyons).
Add parenthesis around the library Endianness macros that do nothing on a particular architecture to prevent operator precedence issues depending on usage.
Minor documentation corrections.
14 years ago
cff190b8f4
Minor documentation fixes.
...
Add extra parenthesis around terms in the common MIN() and MAX() macros to prevent issues with non-trivial macro inputs (thanks to David Lyons).
14 years ago
d0ac8e46f9
Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT().
...
Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines.
Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values.
Fixed TWI_ReadPacket() not releasing the TWI bus on read completion.
14 years ago
fc5fa769ef
Pull out architecture specific macros and other definitions into a new common header file. Add new JTAG_DISABLE() macro for the AVR8s to software-disable JTAG debugging using cycle-safe assembly code.
14 years ago
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
14 years ago
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
15 years ago
01d269879f
Add new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros.
15 years ago
d9643cf6ec
Add start of an architecture port to the Atmel USB XMEGA devices.
15 years ago
bcb627e1a1
Add missing doxygen group terminator to the new CompilerSpecific.h header file.
15 years ago
bfa22eca26
Split out compiler specific helper macros into a new CompilerSpecific.h header file inside the library, for future expansion.
15 years ago
8c3d421a01
Added board hardware driver support for the EVK1104 board.
...
Fix inverted LEDs_GetLEDs() result for the EVK1100 and EVK1101 boards.
15 years ago
8cc3fd56d9
Add board driver support for the EVK1100 board.
15 years ago
d784baaa3a
Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time option was not enabled on the AVR8s.
...
Add C++ compatibility to some header files currently missing extern "C" linkage.
15 years ago
3bd6336075
Added board driver support for the Busware TUL board.
15 years ago
f01a05415c
Spell check library source code files.
15 years ago
7d3150423d
Add new USE_LUFA_CONFIG_HEADER compile time option.
...
Add missing LEDS_ToggleLEDs() function to the LED driver for the EVK1101 board.
15 years ago
a85fa30bf1
Minor documentation fixes.
15 years ago
f670bdeff8
Add __VA_ARGS__ support to the LUFA supplied ISR macro. Add proper result typecasting to the SWAPENDIAN_* macros.
...
Switch to using -1 on the UC3 target to obtain a register mask with all bits set (for clearing interrupts and status flags).
Fix incorrect USB controller mode on the UC3 when a fixed mode is specified as a compile time option due to AVR32_USBB.USBCON.uide being set by default.
Make USB_Descriptor_String_t use a uint16_t for Unicode strings on all targets except the AVR8 (retained for backwards compatibility).
15 years ago
04263de4f0
Fix definition of pgm_read_ptr().
15 years ago
995195a2b0
Add missing function attributes to the pipe/endpoint functions for all architectures.
...
Perform endianness correction in the HID report parser for big-endian platforms.
15 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
15 years ago
d08116b02f
Create a new Common module documentation group for the new Global Interrupt macros.
15 years ago
c263ea837a
Move global interrupt enable/disable functions out to Common.h and document them.
15 years ago
de9bd767dc
Correct UC3 global interrupt functions.
...
Replace all calls and references to _delay_ms() in the code with the architecture-agnostic Delay_MS() function.
Improve code generation for the Delay_MS() function on the AVR8 architecture when called with a constant input.
15 years ago
70284d390f
Add in a new common Delay_MS() function, which provides a blocking delay for all architectures.
...
Remove use of avr-libc specific ATOMIC_BLOCK, replace with a new per-architecture set of inline functions to retrieve and manipulate the global interrupt enable bit for each architecture.
Add in documentation for the USB controller common interrupt routine which must be linked to the interrupt controller in the user application on the AVR32 UC3 architecture.
15 years ago
2efa79d3ec
Conditionally add available address spaces to the address space enum, for multiple address space architectures.
...
Update Doxygen configuration file for the latest Doxygen release.
Minor documentation updates.
15 years ago
f595043584
Add in new architecture attribute defines to selectively remove the EEPROM and FLASH memory space functions on architectures which do not have seperate memory address spaces.
15 years ago
5eb1862d54
Remove redundant Doxygen guards from the internal preprocessor definitions.
15 years ago
944e0d2009
Rename UC3B driver files to UC3, as they are generic to all AVR32 UC3 models.
15 years ago
6005a42150
Add experimental support for the UC3A0, UC3A1 and UC3A3 series AVR32 microcontrollers.
15 years ago
f301a4a21f
Oops - rename misnamed Endianess.h header file.
...
Remove UC3B temp macros related to EEPROM, to ensure that projects requiring this break at compile time rather than at runtime until a solution can be found.
15 years ago
b1528a1256
Move out endianness management macros into a new common Endianness.h header.
...
Fix Doxygen documentation, broken due to the added ATTR_PACKED attribute on some structs breaking the Doxygen parser.
15 years ago
e4b3e3fc65
Fix UC3B architecture compile errors and ensure the architecture can be compiled with no special makefile tokens defined.
15 years ago
b763c3f33e
Porting updates for the UC3B architecture - get UC3B partially enumerating using a modified mouse demo on the EVK1101. Implement a software FIFO for the endpoint banks; datasheet hints that this can be done through hardware as on the AVR8 architecture, but the correct method to do this not discovered yet.
15 years ago
8c6f26e19d
Add in USB_INT_RegisterHandlers() internal function to register the interrupt handler routines used by LUFA. Add dummy loads after clearing the interrupt lines according to the datasheet.
...
Add in temporary global interrupts enable/disable macros.
15 years ago
4a3b70e727
Fix USB Host mode compile errors for the UC3B architecture.
15 years ago
381dd0d490
Move out common architecture-independent core definitions into the appropriate core dispatch header files.
15 years ago
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
15 years ago
a318f32b31
Update board driver common APIs to use uint_reg_t.
15 years ago
cad5e9ffca
Added start of a port of the core USB driver code to the AVR32 UC3B architecture.
15 years ago
Dean Camera