2f643f6143
Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when Report protocol is not needed.
15 years ago
baa1b22654
Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) to send report to the attached device.
15 years ago
89c837ee34
Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for sytax errors in the library.
...
MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs.
Added beginnings of a MIDI class bootloader.
15 years ago
7977663f62
Add information on the new MouseHostDevice dual role demo to the library documentation. Add a 0x prefix to the LUFA_VERSION_INTEGER define to ensure that it is stored as BCD, and not an octal value.
15 years ago
e57e08c672
Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a device ID (thanks to Andrei Krainev).
15 years ago
576f40f5ae
Move Dataflash operational checking code out from SCSI.c into the DataflashManager.c in the Device mode Mass Storage demos.
15 years ago
242303c160
Add new attributes to the HID Report Parser and HID Host Mode Class driver to keep track of the largest report the device can send for buffer allocation purposes. Change MouseHostWithParser and KeyboardHostWithParser demos to only allocate the needed number of bytes.
15 years ago
3ffa7543a0
Finish initial draft of the Host Mode HID Class driver.
...
Add new MouseHostWithParser and KeyboardHostWithParser Host Class driver demos.
15 years ago
f5c645296c
Added new MassStorageKeyboard Device Class Driver demo (thanks to Matthias Hullin).
15 years ago
51566d1a81
Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen.
...
Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID.
More additions to the unfinished HID Host Class Driver.
15 years ago
cd0adb7574
Added support for the officially recommended layout of the external peripherals connected to the BUMBLEB board.
...
Added flag to the HID Host Class driver to indicate the currently selected reporting protocol.
15 years ago
7c6b2019a3
Fix Mass Storage Host Class driver GetMaxLUN command - incorrect function return codes used in comparison to check for success.
...
Add HID Host Class driver functions to set the report protocol, add more class driver documentation.
15 years ago
eee712f769
Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker).
16 years ago
93b24a25df
Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael from DirectAid.ca).
16 years ago
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
16 years ago
524decdeb3
Change HID report parser so that it can calculate and record the sizes (IN, OUT and FEATURE) of each report within the device, by report ID. This will be required in host mode, so that the host can determine how many bytes of data must be read in for each report.
...
Add to MouseHostWithParser and KeyboardHostWithParser demos to print out the report sizes when a valid device is connected.
16 years ago
331929833d
Add Host mode Class driver demo summaries.
16 years ago
6f993a2f75
Add link to third-party signed version of the official FLIP DFU driver for 64-bit Windows OSes to the DFU bootloader readme file.
...
Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.
16 years ago
c8b72f955f
Corrected incorrect signature bytes for the AT90USB82 and added support for the ATMEGAXX2 variant AVRs to the DFU bootloader.
...
Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.
16 years ago
1190652c0b
Fixed DFU and CDC class bootloaders on the AT90USBXXX2 series USB AVRs.
16 years ago
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
16 years ago
064e6a2f32
Changed Still Image Host class driver to auto-fill TransactionID element of sent headers depending on the current session state.
...
CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker).
The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
16 years ago
6783bc4594
Add StillImage Host Class Driver functions for opening and closing sessions. Ensure IsActive is set on the interface to allow device functions to run.
...
Fix spelling of "Received" in all source files where it is misspelt "Recieved".
16 years ago
205b35d131
Add user-filtering to the HID report parser, so that the user code can decide which items are to be stored into the HID_ReportInfo_t structure and which should be discarded to save on RAM usage.
16 years ago
ecf7c18cf2
Fixed error in PrinterHost preventing the full page data from being sent to the attached device.
16 years ago
0fdc1a2bc6
Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles.
16 years ago
113df4878b
Fix up MissileLauncher demo's ConfigurationDescriptor.c so that it uses the new USB_GetDeviceConfigDescriptor() function parameters.
16 years ago
5908e28e8d
Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header.
...
Added basic PIMA commands to the StillImage Host Class driver - need to extend to PIMA specific command functions.
16 years ago
bda4bd4501
Move check for devices not supporting internal serials in demos which make use of USE_INTERNAL_SERIAL to Descriptors.c from Descriptors.h so that the warning is only generated at most once per compilation.
16 years ago
dac7b046fd
Add return codes to the CDC Host Class driver String/Byte transmission functions.
16 years ago
cf2776531c
Add extra check for OUT ZLP in the CDC Device Class driver service task to quickly clear zero-length termination packets from the host.
16 years ago
778da9dc6d
Removed unused INCLUDE_FROM_BOARD_DRIVER internal define from the board driver dispatch headers.
16 years ago
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
16 years ago
e2822fb30d
Remove deleted source files from the LUFA library makefile.
...
Renamed parameters of SI_Host_ConfigurePipes() to match other Host mode Class drivers.
16 years ago
3dce79d68c
Added start of the Still Image Host Class driver demo and driver code.
...
Re-enabled building of the Host mode demos ClassDriver directory.
16 years ago
0d3a3f7536
Remove skeleton Audio and MIDI Host mode Class drivers -- will not implement in next release.
16 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
16 years ago
94c899d7b7
Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback routine, so that ignored callbacks don't cause incorrect data to be sent.
16 years ago
922e60192d
Condensed SCSI command functions in the LowLevel Mass Storage Host demo, to save on FLASH space.
...
Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).
16 years ago
023838fe4a
Add check to Pipe_IsEndpointBound() in the Mass Storage Host mode Class driver to ensure that multiple instances of the driver can be used on a single device with multiple Mass Storage interfaces.
16 years ago
d297ea12b7
Added new "Common" section to the class drivers, to hold all mode-independant definitions for clarity.
...
Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code.
16 years ago
665fe11f12
Fixed Device mode HID Class driver always sending IN reports, even when no data is to be reported.
16 years ago
8ea5c631c8
Minor documentation fixes to the completed Host mode Class drivers.
16 years ago
31d8ebebc0
Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects/Host/ makefile.
...
Add more skeleton functions and definitions to the Mass Storage Host mode Class driver.
Made Endpoint_Write_DWord_* functions echo the structure of the matching Endpoint routines for clarity.
16 years ago
ee744abb7e
More work on the Mass Storage Host mode Class driver.
...
Added ATTR_NON_NULL_PTR_ARG() attributes to the class drivers to improve user code reliability by disallowing explicit NULL pointers as pointer parameters in function calls where the parameter must not be NULL.
Disabled building of the Demos/Host/ClassDriver directory until Host Mode Class drivers are complete to prevent build errors in the meantime.
16 years ago
f547eb3608
Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size.
...
Fixed Programmer's Notepad project file to reflect new location of AVRISP project.
16 years ago
4742e95a3f
Fixed AVRISP V2 Protocol handler for the READ_FLASH_ISP and READ_EEPROM_ISP handler - can now correctly read back device data. Programming command handler is still broken, although first page is written correctly to FLASH in paged write mode.
16 years ago
7e74bd3ea2
Moved out target-related V2 protocol commands into a seperate file for the AVRISP project.
...
Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.
16 years ago
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
16 years ago
1e8df8951a
Added V2Protocol handlers to the AVRISP project to enter/exit programming mode, and read/write fuses, lockbits, OSCCAL and Signature bytes.
...
Added ShutDown functions for all hardware peripheral drivers, so that peripherals can be turned off after use.
16 years ago
Dean Camera