063474561d
Merge in latest trunk.
13 years ago
8cfb3d9f09
Update project Doxygen and makefiles so that the resulting project documentation hides the unused version value, and uses the same HTML CSS stylesheet as the library core.
13 years ago
cb9e7392c5
AppConfigHeaders: Make sure that in applications using an AppConfig.h configuration file, all application headers include the configuration file.
13 years ago
13085a3351
AppConfigHeaders: Switch low level Device mode demos to use LUFAConfig.h configuration header files.
13 years ago
802910d49f
AppConfigHeaders: Update several additional user projects to use configuration header files, rather than makefile defines. Remove compile time warnings for projects lacking device serial support, remove incomplete StandaloneProgrammer project.
13 years ago
359fbfe14d
Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.
13 years ago
590d9b5ff8
Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen).
13 years ago
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
13 years ago
3211b35a4c
Make Doxygen fail for any Doxygen output other than unsupported tags (as these are somewhat benign).
...
Improve exclusion list for the main library export_tar rule to exclude any compiled library files from the export.
13 years ago
d5291c2e10
Only abort Doxygen documentation generation if a non-unsupported tag warning is encountered.
13 years ago
663f9bd5f5
Update Doxygen documentation build scripts to fail if any warnings are generated.
13 years ago
7416ebd7c6
Update StaticAnalysisTest to check for missing header files. Fix found incorrect header file paths in the demos and projects.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
b5682f2c44
Add project name to the Doxygen makefile target output.
13 years ago
3478178127
Add shortcuts to SwapEndian_16() and SwapEndian_32() internal functions to improve optimization if called with constant inputs.
14 years ago
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
14 years ago
0c2ad9eb34
Add missing SVN eol-style property to files where it was missing.
14 years ago
04660d3793
Seperate out the device demos and project's configuration descriptor structure definitions to clearly indicate what descriptors belong to which interface.
14 years ago
ca9f89ce82
Add new "checksource" target to the library makefiles, for automated source file existance checking.
14 years ago
0ec2b55a7c
Add missing SVN eol-style properties to source files to prevent mixed end-of-line characters.
14 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
14 years ago
899df7d331
Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
...
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
14 years ago
aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
782614dbb5
Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.
...
Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.
14 years ago
5995c3f880
Oops - fix missing constants in the TempDataLogger FatFS diskio.h header file.
...
Add const to all project descriptor definitions for safety.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
70d55f6e0c
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
...
Spell check source code files.
14 years ago
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
c43605612d
Lower bulk endpoint polling rate in the descriptors to the lowest possible value to give maximum throughput.
14 years ago
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
14 years ago
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
14 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
c0e4f52e8f
Fix up incorrect version numbers in demo/project descriptors.
...
Add class name prefixes to missed constants in the class drivers to give all class driver elements a consistent namespace.
14 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
b3c6599bb7
Remove remaining void* descriptor casts in the projects and demos that were not removed when the GetDescriptor callback function's signature was altered.
15 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
15 years ago
4cc7f5200b
Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will not break communications with the host by exceeding the maximum control request stage timeout period.
15 years ago
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
15 years ago
be520aed52
Add notification endpoint to the incomplete TMC demo.
15 years ago
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
15 years ago
98947e3750
Ensure all demos now compile in C99 standards mode, and not GNU99 (C99 + GNU extensions).
15 years ago
Dean Camera