5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
a8871c7fba
Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured.
...
Small documentation improvements to explicitly reference tokens in Doxygen, to ensure that they are converted to cross-reference links in the output files.
14 years ago
7aaced1e8b
Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum.
...
Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
14 years ago
c1cfffd8eb
Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings.
14 years ago
292a631b62
Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.
14 years ago
3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
14 years ago
c8942ef469
Fixed LowLevel JoystickHostWithParser demo not saving the chosen HID interface's report descriptor size.
...
Simplified low level Host demo configuration descriptor parser routines.
14 years ago
d06febbb59
Fix device mode for the U4 parts.
14 years ago
383d167125
Whitespace corrections.
...
Make Printer Host mode Class driver interface descriptor search routine pre-cast the current interface descriptor to simplify the value checks.
14 years ago
a1e453e900
Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device.
14 years ago
86367574e6
Fix incorrectly named configuration descriptor callback routines in the host mode class drivers.
...
Fix typo in MIDI low level device demo.
14 years ago
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
14 years ago
158afe9109
Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability.
...
Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly.
Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices.
Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.
14 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
14 years ago
c0e4f52e8f
Fix up incorrect version numbers in demo/project descriptors.
...
Add class name prefixes to missed constants in the class drivers to give all class driver elements a consistent namespace.
14 years ago
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
14 years ago
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
14 years ago
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
14 years ago
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
14 years ago
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
14 years ago
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
14 years ago
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
14 years ago
1621158c62
Fix warning when not compiled for UID auto-selection mode.
14 years ago
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
14 years ago
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
14 years ago
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
14 years ago
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
14 years ago
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
14 years ago
6b59c9b834
Minor documentation phrasing changes.
14 years ago
12fb68ea1f
Added PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the Host mode Printer Class driver.
...
Modified PRNT_Host_USBTask() to flush the output pipe on each call.
15 years ago
4c49ee6885
Whitespace corrections.
15 years ago
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
15 years ago
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
15 years ago
6e011f88d9
Must save and restore the endpoint/pipe interrupt enable flags during reconfiguration of all endpoints/pipes in the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() routines.
15 years ago
ebdb1b37ca
Fix bug in Pipe_ConfigurePipe() breaking already configured pipes that was accidentally clearing the pipe's IN mode.
15 years ago
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
15 years ago
0174d8ea70
Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.
15 years ago
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
15 years ago
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
15 years ago
cd4c10fefa
Better documentation for the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() functions.
15 years ago
b7b8a9edfa
Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.
15 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
15 years ago
ed8ad18f26
Fix Doxygen typos in Device.h.
15 years ago
f6e1eaba75
Optimise Endpoint_ConfigureEndpoint_Prv() function to produce smaller code when CONTROL_ONLY_DEVICE compile time token is defined.
15 years ago
e72f424f64
Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.
15 years ago
4cc7f5200b
Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will not break communications with the host by exceeding the maximum control request stage timeout period.
15 years ago
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
15 years ago
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
15 years ago
e966219834
Clarify in the documentation that the Audio demos and driver is for the Audio 1.0 specification, not the newer (and more advanced/less supported) 2.0 specification.
15 years ago
Dean Camera