50ff97f378
All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance.
13 years ago
bbe7c77b91
Update ModuleTest build test to use as many compile warnings as possible. Set -Werror so that any generated warnings produce an error.
13 years ago
0e4ece1d1d
Update build test "ModuleTest" to check platform drivers where possible. Add missing copyright/license headers.
13 years ago
b7f4370c8e
Oops - don't reset AVRISP-MKII timeout in XPROG mode, as this is synchronous serial and data is always received regardless of attached or non-attached target.
13 years ago
2f036ae2bf
Add build test for forced single USB modes.
...
Fix UC3 Interrupt Management platform driver not compiling under C++.
13 years ago
1132488e8f
Add build tests to verify correct compilation of as many modules as possible under as many architectures as possible.
...
Fix broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file.
Fix missing semicolon in the UC3 architecture host pipe functions.
Fix failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified.
13 years ago
04b8360b15
Minor documentation improvements.
13 years ago
9d2e7aeff4
Add missing file Subversion EOL-style properties.
13 years ago
7a8b038687
Fix Dataflash driver for the XMEGA-B1 XPLAINED - the Dataflash is connected to the USART module, but requires physical port remapping.
13 years ago
01a80df6c2
Minor documentation improvements.
13 years ago
5051df08d7
Minor documentation improvements.
13 years ago
09d2be0dc1
Add new Master SPI Mode USART serial peripheral driver for the XMEGA and AVR8 architectures.
...
Modify board Dataflash drivers so that each individual board is responsible for including the correct peripheral driver (SPI or SerialSPI) based on the board connections to the Dataflash chip.
Complete A3BU-XPLAINED and B1-XPLAINED board Dataflash drivers.
13 years ago
f45d60f768
Added Serial USART peripheral driver for the XMEGA platform.
...
Fix XMEGA SPI peripheral driver's incorrect const-ness on the SPI peripheral struct.
13 years ago
82fdedc192
Minor documentation improvements.
13 years ago
81bd8f2f83
Clean up the Audio Device class driver control request Endpoint match logic.
13 years ago
2180f57d17
Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage.
13 years ago
385ffb6de3
Fix XMEGA architecture not correctly resetting the device address and endpoints in response to a USB bus reset from the host.
13 years ago
a2d18e46f8
Update XMEGA board drivers to use the port inversion feature of the XMEGA architecture rather than performing the inversion in software. Add partially completed XMEGA-B1-XPLAINED Dataflash board driver and revert implementation of the XMEGA-A3BU-XPLAINED Dataflash driver as the chip is connected to the USART, not the SPI interface.
13 years ago
7a1033025b
Minor documentation fixes.
...
Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
13 years ago
c60897df39
Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet, as this appears to be implemented in hardware.
13 years ago
18b82b3575
Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1).
...
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
13 years ago
1482f77826
Oops - XMEGA-B1 Xplained LEDs are on PORTB and PORTE, not PORTF and PORTE.
13 years ago
4d131de85b
Add board driver support for the Atmel XMEGA-B1 Xplained board.
...
Fix Dataflash driver for the A3BU-Xplained board.
Minor documentation improvements.
13 years ago
fdab3aef86
Add (still preliminary) support for the ATXMEGA64A4 and ATXMEGA128A4. Fix minor error in the AVRISP-MKII clone project descriptors.
13 years ago
fe8326855a
Revert changed version files in /trunk/ now that the LUFA-120219-BETA version has been released.
13 years ago
5a2d815722
Commit for the 120219-BETA release.
13 years ago
da676f0f70
Add support for the Micropendous (Arduino-like) series of boards (revisions 1 and 2).
13 years ago
0e8e70153a
Update LUFAConfig.h with the new compile time options, re-format Doxygen documentation for all compile time options.
13 years ago
a677254026
Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.).
13 years ago
252bd7bb2c
Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak).
13 years ago
e55946f972
Add missing svn:eol-style properties to /trunk/.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
64e9361298
Minor corrections to the XMEGA USB controller implementation.
13 years ago
df33278d91
Minor documentation corrections.
13 years ago
43a3350981
Add API support signature to the CDC and DFU class bootloaders, so that the application can detect the bootloader's API support.
13 years ago
3dacb73af3
Fix errors in the new Micropendous board drivers. Reorder the board definition macro indexes so that misspelled board names default to BOARD_USER rather then BOARD_USBKEY.
13 years ago
10a56f6105
Add support for the Micropendous series of USB AVR8 boards.
13 years ago
8d2cb61a5b
Minor documentation fixes.
13 years ago
a436fbb612
Minor documentation improvements.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
956f9e3709
Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
13 years ago
401ff1cef1
Add missing reference to the BootloaderAPI.S source file in the DFU and CDC class bootloader AVRStudio 4 project files.
13 years ago
9f99c7fa03
Fixed DFU class bootloader not resetting the LED pins as high impedance inputs when a software jump to the user applications is requested.
13 years ago
5563da6a62
Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers.
13 years ago
a147cee95f
Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver.
13 years ago
dd312cead4
Make all AVRISP-MKII programmer parameters readable, since there's no real good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
13 years ago
bc3db793e9
Minor bootloader tweaks; make some functions static where possible to reduce the compiled binary size, add additional comments to the makefiles.
13 years ago
3038ea1c6e
USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors).
13 years ago
154d28e39f
Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman).
13 years ago
Dean Camera