5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
a8871c7fba
Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured.
...
Small documentation improvements to explicitly reference tokens in Doxygen, to ensure that they are converted to cross-reference links in the output files.
14 years ago
7aaced1e8b
Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum.
...
Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic.
Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run.
Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().
14 years ago
c1cfffd8eb
Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings.
14 years ago
3ae9e6042f
Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.
14 years ago
7166c7ba3e
Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded.
...
Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.
14 years ago
a509729b2d
Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive.
...
Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.
14 years ago
713670043a
Move out many of the common class driver constants into grouped enums, to make them more managable.
...
Add new CDC descriptor structs to the CDC class driver, so that the CDC demos can use human readable field names.
Rename prefix for Still Image Host class driver functions from "SImage_" to "SI_" to remain consistent with the rest of the driver.
14 years ago
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
14 years ago
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
14 years ago
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
14 years ago
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
14 years ago
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
14 years ago
6b59c9b834
Minor documentation phrasing changes.
14 years ago
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
14 years ago
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
14 years ago
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
14 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
14 years ago
e72f424f64
Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.
14 years ago
0f45b9c8e0
More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.
14 years ago
28401f7bb7
Spell check all source files once again to find any typos.
14 years ago
97143bf814
Add missing const qualifiers to class drivers.
...
Indent core library function parameters so that there is only one parameter per line, to increase readability.
14 years ago
99d8a39363
Move and rename DevChaper9.c/.h and HostChapter9.c/.h to the HighLevel directory, new named DeviceStandardReq.c/.h and HostStandardReq.c/.h.
...
Rename LowLevel.c/.h to USBController.c/.h.
Remove dependancies on the complete <avr/io.h> header in the HighLevel USB driver directory, to ensure less work is required in later (possible) ports.
14 years ago
5f57785404
Add missing const qualifier to the parameters of the USB_GetNextDescriptorComp() function.
...
Reduce spacing of the structure elements in StdDescriptors.h to make the code more readable.
14 years ago
deed746d37
Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT().
...
Minor tweaks to the library documentation.
14 years ago
711542ee89
Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.
14 years ago
fc92f9969c
Minor documentation cleanups.
15 years ago
5144ea76f6
Oops - descriptor pointer should be assigned, not incremented with the new type-safe code.
15 years ago
6d22a00e8b
Better fix to avoid void pointer arithmetic in ConfigDescriptor.h to regain C++ compatibility (thanks to Michael Hennebry).
15 years ago
f606afefff
Remove void* arithmetic in the USB_GetNextDescriptor() static inline function, to make the header file C++ compatible once again. Implement workaround for an obscure GCC bug which can cause incorrect code generation under some circumstances when the void* is re-cast.
15 years ago
152b2764c3
Small tweaks to ConfigDescriptor.c/.h to ensure pointers use the correct type, and to remove const attribute from the descriptor comparator callback function pointer type define, and into the function prototype instead.
15 years ago
e95c96ea20
Fixed internal device serial not being accessible on the ATMEGAXXU2 AVRs (thanks to Axel Rohde).
15 years ago
328ed71ce7
Fix spacing of the function parameter descriptions in the Doxygen documentation.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
e977774d4e
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
15 years ago
7b79325aa0
Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code.
...
Added spacing between multiple paragraphs in Doxygen \note sections.
Removed call to the clock prescaler reset function in the Teensy bootloader to save space - the user application is accessed via a watchdog reset anyway, so the prescale reset would only affect the speed of the bootloader itself.
15 years ago
9257f4ab8e
Add briefs for the library core structures.
15 years ago
0557676013
Add file-level brief documentation.
...
Remove accidentally duplicated model-specific peripheral driver files.
15 years ago
f79f9abd28
Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian).
...
Minor documentation cleanups.
Make sure HID class driver uses properly cast pointers when writing to the report buffer.
15 years ago
14a5a94084
Fix incorrect error when directly including the LUFA internal USB library components.
15 years ago
071fd8ce53
Revert changes made for the partial port to the AVR32 architecture.
15 years ago
a7aaa45ec4
More AVR32 achitecture ports.
15 years ago
3702ba1fb3
More porting of the USB core to the AVR32.
15 years ago
0e6d5cf5b4
Start porting the USB core to the AVR32 UC3B.
15 years ago
d49cc0f783
Add more include protection macros to give the user warnings when they try to manually include private driver header files, instead of the public driver headers.
15 years ago
4d246a82cb
Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen).
...
Mark the AVRISP-MKII project descriptors as being both Bus Powered and Device Powered.
Copy over file level documentation of the peripheral drivers to the module level documentation.
15 years ago
f3d370a777
Clean up and add more comments to the AVRISP-MKII project. Make sure the SPI_MULTI command handler supports multiple packet responses. Use slightly smaller/faster repeated indirect-load commands when retrieving the PDI target's memory CRCs.
15 years ago
a56d95e8c2
Fix XPLAIN Dataflash and LED drivers.
15 years ago
7f9f97c792
Update copyright year to 2010.
15 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
15 years ago
Dean Camera