a9d5e129b7
Changed over manual loops waiting for endpoints to be ready to use the library Endpoint_WaitUntilReady() function for robustness. Fixes issues with terminated transfers on the host locking up USB devices.
15 years ago
4b35dd1670
Commit for 090810rc1 release.
15 years ago
042d3288ad
Fix incorrect Event call name in USBInterrupt.c.
15 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
15 years ago
357ccc577b
Better fix for LowLevel CDC demo issue where sending data before the line encoding is set will cause a failure of the host to open the port. Added fix to the DualCDC and USBtoSerial LowLevel demos.
16 years ago
eff07bb877
Fix issue with CDC device demos causing broken communications when the device tries to send data before the host has set the line encoding.
16 years ago
5c069f909a
Update migration notes for the upcomming 090810 release.
16 years ago
840d386deb
Cleanup and optimization of the internal serial retrieval routines.
...
Renamed ATTR_NOINLINE to ATTR_NO_INLINE to fit with the rest of the library function attribute names.
16 years ago
ab2ae13d81
Fix build error in TestApp demo caused by previous commit.
16 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
16 years ago
bbf89d81fa
Make both LowLevel and ClassDriver AudioOutput demos always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS compile time option from the demo). This allows for positive feedback to the user of audio activity regardless of output mode.
16 years ago
c5eeedd522
Removed interrupt disable/enable from the Device mode control request processing routines, as they can cause problems with user code and can cause infinite spinlocks under some circumstances.
...
Added new LUFA logo from EDIGMA.COM.
16 years ago
ac593611c9
Fixed the ClassDriver GenericHID demo so that it echoes back reports as indicated in the demo overview.
16 years ago
eb41086947
Fix demos based on the device mode HID class driver, as well as the driver itself. Changed HID device class driver to require the user to give a buffer and size to hold the previously generated report, for comparison purposes, and altered the prototype of the CALLBACK_HID_Device_CreateHIDReport() function so that reports can be sent to the host even if there are no apparent changes (useful for relative movements in mice, etc.).
16 years ago
a789619fbe
Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the correct terminology is used (thanks to Brian Dickman).
...
Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).
16 years ago
7df6b9563c
Add new HID_Device_MillisecondElapsed() function to the HID device Class driver, to move the burden of managing the Idle period of each instance to the library and not the user application.
16 years ago
7227e133a9
Ensure that the previous HID reports in the HID device class driver are kept per-instance, rather than per-device.
16 years ago
72932e2780
Fix to HID device mode Class driver, so that new reports are compared against the old, and updated reports made within the idle period are sent immediately to the host.
16 years ago
ec079c71d8
Minor cleanups to DualCDC ClassDriver device demo for clarity.
16 years ago
41babf1cb7
Fix incorrect configuration in the ClassDriver AudioOutput demo.
...
Make all audio device Class Driver functions require a reference to the Audio class instance, so that the endpoint size can be checked (and to standardize the APIs).
Make LEDs more responsive in the AudioOutput device demos.
16 years ago
41b54a2acd
Set all CDC and MassStorage device mode demos (LowLevel and ClassDriver) to use the USE_INTERNAL_SERIAL feature, add compile time warnings for devices which do not have an internal serial.
16 years ago
ce3ea6fb25
Added standard stream example to the ClassDriver CDC device demo.
...
Fix incorrect HWB button mask in the STK526 Buttons driver.
16 years ago
5ca1d7bf8f
Fix redefinition warning when USB_DEVICE_ONLY is set on an AVR which does not support USB host mode.
16 years ago
fef185a409
Cleanup USBMode.h to simplify preprocessor logic.
16 years ago
bb05712efe
Added 404 errors to the RNDIS Webserver example.
16 years ago
6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
16 years ago
7f3f39b575
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.
...
Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
e426463355
Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
16 years ago
c1be307393
Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.
16 years ago
23c1653efe
Make LowLevel AudioOutput demo work in the same way as the ClassDriver AudioOutput demo for LEDs output.
16 years ago
61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
16 years ago
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
16 years ago
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
16 years ago
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
16 years ago
cbbd3d746a
Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.
16 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
16 years ago
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
16 years ago
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
16 years ago
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
16 years ago
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
16 years ago
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
16 years ago
7a5d045987
Slight changes to TeensyHID bootloader to ensure it builds under the 2KB boundary.
...
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
44179abcf8
Add PrinterHost demo to the documentation.
16 years ago
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
16 years ago
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
16 years ago
bf50959b80
Simplify SideShow GUID compares via a macro.
16 years ago
Dean Camera