aba7932a5c
F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
e6dc951630
Add new HID_DESCRIPTOR_VENDOR() macro, change over all projects and Device ClassDriver demos to use it.
...
Fix reversed byte ordering of multi-byte HID data.
Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index.
Removed the HID_IOF_NON_VOLATILE and HID_IOF_VOLATILE flags from HID INPUT items where the flag is invalid. Changed over HID OUTPUT items to use HID_IOF_NON_VOLATILE.
Change over MagStripe project to use HID_DESCRIPTOR_KEYBOARD() for its HID report. Change over MouseHostDevice demo to use HID_DESCRIPTOR_MOUSE() for its HID report.
14 years ago
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
14 years ago
7d83bd0dcc
Add DEVICE_STATE_AS_GPIOR=0 compile time option to the library projects, to reduce compiled binary size.
14 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
14 years ago
800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
14 years ago
5f3a1b2629
Fix invocations of avr-size in all makefiles broken on unpatched *nix systems, due to the recent update to the latest WinAVR makefile template.
14 years ago
4c9425c0d5
Added periodic flush timer to the Benito project. Alter the serial transmission code so that sent bytes do not block the remainder of the main program code from running.
15 years ago
6b5e684c77
Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.
...
Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.
15 years ago
42ac34b484
Change over all makefiles to use C99 standards mode, rather than C99 + GNU Extensions.
15 years ago
9299735c75
Disable strict aliasing explicitly in the project makefiles, as this is apparently enabled by default in newer AVR-GCC builds, and aliasing is used heavily for type-punning through the LUFA and third party library's codebase.
15 years ago
f4710f6f86
Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistancies between the behaviour of the command line tools used to perform the check on each platform.
...
Removed the internal endpoint and pipe memory allocation macros, as this is already performed directly in the code. Simplify the endpoint and pipe reset procedure.
15 years ago
ae9dab1398
Add missing clean_doxygen phony targets to the project makefiles.
15 years ago
8b053d6ba5
Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
...
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
15 years ago
8d993afc53
Replace ring buffer library in Benito and USBtoSerial projects with the new lightweight ring buffer header to improve reliability.
15 years ago
cd0093a14b
Fixed AVRISP-MKII clone project not correctly issuing SET EXTENDED ADDRESS commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton).
...
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
15 years ago
d3c623e1e1
The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver.
...
Fix Benito makefile which was accidentally changed during testing.
15 years ago
e277ff0cf4
Removed TeensyHID bootloader, per request from Paul at PJRC.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
e331b531c6
Change over instances of "make" in the makefiles to "$(MAKE)" to allow for the make tool to be overridden.
15 years ago
e977774d4e
Relocate USBInterrupt.c/.h from the HighLevel USB driver directory to the LowLevel directory as it is hardware-dependent.
15 years ago
3790907f4d
Added board hardware driver support for the Benito programmer.
15 years ago
15f84bb8f5
New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).
...
Spell-check code/comments in the Webserver/AVRISP-MKII projects.
15 years ago
41ad6bd6d7
New revision Benito hardware will be 16MHz, and use the ATMEGA32U2. Change makefile to suit.
15 years ago
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
15 years ago
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
15 years ago
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
15 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
15 years ago
6d1adf7339
Updated Benito project -- added hardware interrupt and software buffering for serial data reception to prevent missed characters, condensed pulse generation counters into a struct for clarity.
...
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
15 years ago
99c447c754
Fixed issue in USBtoSerial demos where the USART Rx line was not having its pullup enabled at startup, leading to noise being received from the Rx pin when left floating.
...
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
15 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
16 years ago
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
16 years ago
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
16 years ago
Dean Camera