74353374c3
All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed.
...
Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending a valid session ID to the device.
15 years ago
b8db5fc1e7
Added new Relay Controller Board project (thanks to OBinou).
...
Added hardware board driver support for the PJRC Teensy line of USB AVR boards.
15 years ago
c2de01b661
Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment.
15 years ago
f79f9abd28
Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian).
...
Minor documentation cleanups.
Make sure HID class driver uses properly cast pointers when writing to the report buffer.
15 years ago
4e99625f7c
Change over MIDIToneGenerator to use only a single channel (MIDI channel 1) due to cycle constraints.
15 years ago
c58c53dba9
Added incomplete MIDIToneGenerator project.
15 years ago
49b09a2042
Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders and projects.
...
Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
15 years ago
5227ca4ce2
Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.
15 years ago
6d256c5109
Fixed LowLevel MassStorage demo broken on the U2 AVRs due to double-banked endpoints.
15 years ago
72527867f6
Remove redundant check in the software PDI programming code of the AVRISP project.
15 years ago
9a5ae36a4f
Software PDI mode breaks unless the software USART has 100 cycles between bits.
15 years ago
7d51e51c79
Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.).
15 years ago
2b74b517ea
Don't enable the pullup on the target /RESET line in the AVRISP project for PDI mode - clearing the XMEGA's reset control register twice is enough to release it from reset. Possible silicon bug, since the official Atmel programmers have the same issue.
15 years ago
39d56aeffe
Fixed PDI programming mode in the AVRISP programmer project not exiting programming mode correctly (clear target Reset key twice, set /RESET pin to pullup).
...
Add newlines to the MIDI event printf() statements in the MIDI host demos.
15 years ago
b2bdfe4377
Improve documentation for the ADC and TWI drivers.
15 years ago
4f9dd142e7
Fixed ADC routines not correctly returning the last result when multiple channels were read.
...
Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the U4 series USB AVR parts.
15 years ago
aca7863350
Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired.
...
Change over static strings in the Webserver project to use PROGMEM where possible.
15 years ago
92418433a5
Fix incorrect LED mask name in the Webserver project.
...
Fix missing text from the Host Mode States enum documentation.
15 years ago
ce260ae786
Webserver project now uses the board LEDs to indicate the current IP configuration state.
...
Don't double-read data from the attached disk in the incomplete StandaloneProgrammer project when in host mode.
15 years ago
a61c7f671d
Minor documentation updates.
15 years ago
634abab38a
Fix TWI driver not aborting when faced with no response after attempting to address a device on the bus.
15 years ago
c0c982df7a
Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond.
...
Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register.
15 years ago
14a5a94084
Fix incorrect error when directly including the LUFA internal USB library components.
15 years ago
071fd8ce53
Revert changes made for the partial port to the AVR32 architecture.
15 years ago
a7aaa45ec4
More AVR32 achitecture ports.
15 years ago
3702ba1fb3
More porting of the USB core to the AVR32.
15 years ago
0e6d5cf5b4
Start porting the USB core to the AVR32 UC3B.
15 years ago
e11fddfe66
Update Temperature board driver to be AVR32 compatible when the ADC peripheral driver is eventually ported. Make architecture includes explicit for both the AVR32 and the AVR8, to make way for future architecture ports.
...
Add SPI driver aliases for the old function names in the AVR8 driver, so that existing code will still compile against the new version.
15 years ago
c24027f3b5
Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin.
...
Fix broken AVR8 Serial peripheral driver.
15 years ago
2590452104
Change over board hardware drivers to use the custom uintN_t and intN_t native word size types.
15 years ago
d2ed97e34b
Update manual pages to reference unfinished AVR32 port, add port status to the Future Changes page.
15 years ago
99a45fa97d
Add start of an AVR32 SPI driver.
15 years ago
ff8e0ea2d6
Rename AVRU4U6U9 peripheral driver directory to AVR8.
15 years ago
1d8bb8f9bc
Make SPI and USART peripheral dispatch driver headers in preparation for a set of AVR32 peripheral drivers.
15 years ago
aae20139b9
Add drivers for the EVK1101 - begin full port to the AVR32 UC3B line of AVRs.
15 years ago
d2851b3351
Oops - need to revert changes made to ease testing of the software PDI programming mode.
15 years ago
5e12d436fa
Remove dual ISR for software PDI mode, use a single ISR instead to reduce code complexity.
15 years ago
e322f14620
More fixes to the AVRISP command timeout system so that it should no longer lock up while processing command no matter what the conditions.
15 years ago
12a01ed72d
Increased the speed of both software and hardware TPI/PDI programming modes of the AVRISP project.
15 years ago
10b9394a8b
Oops - missed a few references to the old global TimeoutMSRemaining counter in ISPTarget.c of the AVRISP-MKII clone project.
15 years ago
ce8d0424b1
AVRISP programmer project now has a more robust timeout system, allowing for a doubling of the software USART speed for PDI and TPI programming.
15 years ago
04d40897cf
Commit for the 100219 release.
15 years ago
42b850f2b9
Use a temporary variable to hold the current URI length in the Webserver, rather than calling strlen() multiple times on an unchanged buffer. Clean up uip-split.c.
15 years ago
012628f635
Turn OFF double banking in the Webserver demo - leaving it on seems to destroy the system throughput.
15 years ago
3b6987bca3
Add uIP-split code to the Webserver project, so that each packet is split in half to avoid the delayed-ACK problem when communicating with other devices. Condense HTTP server code, so that the HTTP headers are all sent from the one state. Make default filename append to any directory URI, rather than just the root directory.
15 years ago
c77b30e9e6
Clean up XPLAINBridge code.
15 years ago
2b51944a4b
Make sure the button report set masks use OR in all circumstances, to prevent user confusion. While the first set of the buttons report item can be a direct assignment, it is not immediately clear to new developers why this is the case.
15 years ago
015956baba
Oops - missing brackets in the declaration of a string in TELNETServerApp.c.
15 years ago
96a12cd12c
Add missing TWI_Init() call to the TemperatureDataLogger project. Make DUMMY_RTC compile time option the default, so that it works correctly on the USBKEY and other Atmel boards out of the box.
15 years ago
67cb070810
Fix HID Host Class driver sending incorrect ReportType values to the device when issuing requests via the control pipe.
15 years ago
Dean Camera