77adb2ba52
Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments.
13 years ago
e406140f11
Minor documentation fixes - change \note entries to \warning where appropriate and remove/update old documentation.
13 years ago
50ff97f378
All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance.
13 years ago
81bd8f2f83
Clean up the Audio Device class driver control request Endpoint match logic.
13 years ago
2180f57d17
Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
fc4d3ab400
Minor documentation improvements.
13 years ago
a147cee95f
Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver.
13 years ago
f201f6697b
Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.
13 years ago
8b5aa61601
Add new Android Open Accessory class driver to the library core and add a new Android Open Accessory Host ClassDriver demo.
13 years ago
eb2e883fd3
Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities.
13 years ago
8df0cf3241
Fixed race conditions in the CDC, HID and Mass Storage class drivers when processing some control requests.
13 years ago
f1543ae8ff
Fixed CDC class drivers not saving and sending all 16-bits of the control line states (thanks to Matthew Swabey).
13 years ago
2ae41fb153
Added endian-correction to the CDC driver's Line Encoding control request handlers.
13 years ago
94e0a0058a
Oops - restore conditional calls to USB_USBTask() in the Mass Storage class driver for the non-stream loops.
13 years ago
40728fd20d
Remove redundant calls to USB_USBTask() in the Mass Storage Device Class driver when INTERRUPT_CONTROL_ENDPOINT is not used, as this is done inside the stream callbacks.
...
Fix implementations of Endpoint_SetEndpointDirection() and Endpoint_GetEndpointDirection() for the AVR8 architecture.
13 years ago
110711598a
Removed the ENDPOINT_DESCRIPTOR_DIR_* macros in favour of the shorter ENDPOINT_DIR_* macros, which can now be used with both Endpoint_ConfigureEndpoint() and in the device descriptors.
14 years ago
85e85befc4
More endianness porting of the LUFA device mode class drivers.
...
Add endianness information to the class driver and core structure definitions.
Move out the unused Ethernet_Frame_Info_t structure definition to the RNDIS device demos where it is needed.
14 years ago
c6a7a028bd
Merge over core library changes from the MultiArchDemos branch.
14 years ago
a7dd984446
Code style fixes for the Device mode USB Audio Class driver to make it more in line with the style of the other library Device Class drivers.
14 years ago
d8fe01f19a
Rename new Audio class driver functions, callbacks and events to ensure that they contain the USB mode (Device or Host) in the function names.
14 years ago
0bf5064aec
Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction as part of the endpoint address.
...
Add Audio_GetSetEndpointProperty() function to the Host mode Audio class driver.
14 years ago
34164a5550
Remove warnings in the documentation for the library class drivers about sequential pipe/endpoint allocation, as by default this is no longer as issue (unless ORDERED_EP_CONFIG is specified).
14 years ago
e572ee7ff2
Added new Host mode Audio Class driver.
...
Added new EVENT_Audio_StreamStartStopChange() event to the Audio Device Class driver to detect stream start/stop events.
14 years ago
567f7ecce0
Fix errors in the Audio device demos and class driver regarding multiple sample frequency support.
14 years ago
7dffa15c16
Massive corrections to the project documentation and code comments, thanks to Russian translation services provided by Andrey from Microsin.ru.
14 years ago
2731c3a8ae
Added new callback to the Audio Class driver to allow for endpoint control manipulations such as data sample rates.
...
Modified the Class Driver AudioInput and AudioOutput demos to support multiple sample rates.
Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed.
Fix broken LowLevel audio demo descriptors.
Minor documentation fixes.
14 years ago
68468e0aea
Added new incomplete AudioOutputHost Host LowLevel demo.
14 years ago
ea922c98d1
Added new incomplete AudioInputHost Host LowLevel demo.
...
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
14 years ago
9d733d44b4
Add new RNDIS_Host_IsPacketReceived(), RNDIS_Device_ReadPacket() and RNDIS_Device_WritePacket() functions to the Device RNDIS Class Driver.
...
Modify RNDIS demos to suit the simplified Ethernet_Frame_Info_t structure.
14 years ago
e0852408de
Replace cast-as-char* byte access of multibyte variables with proper shifts and masks to preserve endianness across different architectures.
14 years ago
995195a2b0
Add missing function attributes to the pipe/endpoint functions for all architectures.
...
Perform endianness correction in the HID report parser for big-endian platforms.
14 years ago
852b5e612d
Remove redundant type information for bitfield elements, other than the signed/unsignedness of the element.
...
Change type of USB_SelectedPipe and USB_SelectedEndpoint for the AVR32 UC3 architecture to uint32_t to reduce the compiled code size.
14 years ago
899df7d331
Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
...
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
14 years ago
8b13f7f89a
Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name.
...
Fix undefined error in Pipe_UC3B.h.
Add missing migration notes.
14 years ago
f3f481183a
More AVR32 UC3B architecture ports - USB device mode applications can now be sucessfully compiled, although they will be currently non-functional.
14 years ago
f3ec62b5c6
More updates to remove architecture-specific comments from the documentation, alter USBMode.h preprocessor logic to support future architectures more easily.
14 years ago
5e73190582
Start update of documentation to support possible multiple architectures in the future - alter \file documentation to automatically copy in the module documentation where possible.
14 years ago
1daa5e16f9
Initial restructuring of the core USB driver module to support multiple architectures in the future.
14 years ago
3d4d8e7f62
Add new ARCH option to the makefiles to (eventually) specify the target device architecture. Update non-usb peripheral drivers to reflect future multiple architecture support.
14 years ago
43c4735305
Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and added new versions of the *_SendString() routines that expect a null terminated string instead.
...
Added new Serial_SendData() function to the Serial driver.
14 years ago
afd828c095
Removed SerialStream module, rolled functionality into the base USART Serial peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
...
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
14 years ago
a852ea8e43
Added new KeyboardMouseMultiReport Device ClassDriver demo.
...
Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used.
Added new MAX() and MIN() convenience macros.
14 years ago
787869c2fd
Minor documentation corrections for the new HID report item constant defines.
14 years ago
039a714ee4
New HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors.
...
Changed over all project and demo HID report descriptors to use the new HID report item macros.
Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/.
14 years ago
154f934b22
Call USB_USBTask() in the Endpoint stream functions between packets if INTERRUPT_CONTROL_ENDPOINT is not set. Remove calls to USB_USBTask in the Mass Storage class driver stream read/write continuation checks, since this is now done inside the stream function.
14 years ago
f555ad7ced
Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
...
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
14 years ago
7dc3d3a68f
Minor documentation improvements.
14 years ago
1d433d4506
Update copyright year on all source files.
14 years ago
Dean Camera