800485bd95
Remove dfu-programmer program switches, to ensure maximum compatibility with all dfu-programmer versions.
14 years ago
bd85422d2b
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
...
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
14 years ago
b48095c0fb
Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests.
...
Minor whitespace fixes.
14 years ago
5f3c4cc6e0
Reverted modifications to USBInterrupt.h that were intefering with correct host mode operation.
...
Fixed SUSPI interrupt not being cleared during device mode enumeration, causing accidental mis-fires on re-enumeration.
Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode.
14 years ago
c459ef6981
Oops - need to call USB_Attach() when reinitializing into USB Host mode, or no devices will be detected.
14 years ago
5faa79a7b5
Fixed USB_Host_ClearPipeStall() incorrectly attempting to determine the endpoint's direction from the currently selected pipe.
14 years ago
ed7067e89f
Rename internal suspend and wake up USB interrupt macros so that they follow the same naming scheme as the other USB ISR macros.
14 years ago
d66a925786
Make device mode configure the control endpoint even before the bus has been reset, so that the device will enumerate correctly on hosts that do not reset the device before initial use.
14 years ago
b17e87d140
More simplifications to USBController.c, fix errors and warnings when compiled for the series 2 USB AVRs.
14 years ago
1621158c62
Fix warning when not compiled for UID auto-selection mode.
14 years ago
e7e1c21bc5
Clean up USBController.c/.h to more clearly seperate out host and device setup and reset paths.
...
Make USBInterrupt.c process all pending USB host mode interrupts before resetting the bus, so that no interrupts are lost when in UID auto-selection mode.
14 years ago
01fecac0a7
Ensure device address latch bit is not set at the same time as the new address, as per datasheet.
...
Minor documentation fixes.
Fix broken USB host mode due to the USB frame counter not being updated during the early enumeration steps, causing USB_Host_DelayMS() to spinloop forever.
14 years ago
cce8760b91
Removed the EVENT_USB_InitFailure() event, as not specifying a USB mode to USB_Init() now defaults the controller into UID selection mode.
14 years ago
0d57659fa6
Fix incorrect documentation on the Get Descriptor standard request.
14 years ago
6d2f091cec
Make project makefiles correctly clean intermeditary build files from assembly and C++ sources (thanks to Daniel Czigany).
14 years ago
a0f9192568
Minor documentation corrections.
14 years ago
546ab8712e
Fix board name redefinition in BoardTypes.h (thanks to Daniel Czigany).
14 years ago
e61345f872
Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2.
14 years ago
84696c727d
Added board hardware driver support for the BUI development board.
14 years ago
92059fcbf9
Added board hardware driver support for the UDIP development board.
14 years ago
58167f5d4d
Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts.
14 years ago
def0e0ff1b
Remove incomplete MIDIToneGenerator project.
14 years ago
6b59c9b834
Minor documentation phrasing changes.
14 years ago
12fb68ea1f
Added PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the Host mode Printer Class driver.
...
Modified PRNT_Host_USBTask() to flush the output pipe on each call.
14 years ago
41c1fb3843
Added new project makefile template to the library and moved board driver stub files into in a new CodeTemplates directory.
14 years ago
4c49ee6885
Whitespace corrections.
15 years ago
c166dfc64e
Added class specific descriptor type defines with standard USB-IF element naming.
15 years ago
66f14d44a3
Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev).
...
Simplify some of the LED driver functions to produce more compact code.
15 years ago
7aaf9b2036
Added new PRNT_Host_BytesReceived() and PRNT_Host_ReceiveByte() functions to the Print Host Class driver.
15 years ago
6e011f88d9
Must save and restore the endpoint/pipe interrupt enable flags during reconfiguration of all endpoints/pipes in the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() routines.
15 years ago
ebdb1b37ca
Fix bug in Pipe_ConfigurePipe() breaking already configured pipes that was accidentally clearing the pipe's IN mode.
15 years ago
18cbd31605
Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number.
...
Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application handling of USB Start of Frame events while in USB Host mode.
Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible to free up the Start of Frame flag for interrupt use in the user application.
15 years ago
0174d8ea70
Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode, as some devices will drop off the USB bus if no connection is made within a timeout period.
15 years ago
21954179a4
Added board hardware driver support for the USBFOO development board.
15 years ago
b369aa2cc6
Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett).
15 years ago
4dece08bef
Clarify in the project documentation files what the each of the different USB AVR device "series" comprises of.
15 years ago
009eebf229
Fix incorrect ADC driver documentation for the parameters of ADC_Init(), fix incorrect call to ADC_Init() in the TemperatureDatalogger project.
15 years ago
1afe51faa1
Fix up documentation - remove obsolete Scheduler Overview page, roll documentation into the documentation for the (deprecated) Simple Scheduler module.
15 years ago
263178fbb6
Add better description of the Ultra-Lightweight Ring Buffer header files.
15 years ago
cd4c10fefa
Better documentation for the Endpoint_ConfigureEndpoint() and Pipe_ConfigurePipe() functions.
15 years ago
b7b8a9edfa
Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value.
15 years ago
092f82e06f
Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove the need for extra casting inside the callback (thanks to Jonathan Kollasch).
15 years ago
ed8ad18f26
Fix Doxygen typos in Device.h.
15 years ago
f6e1eaba75
Optimise Endpoint_ConfigureEndpoint_Prv() function to produce smaller code when CONTROL_ONLY_DEVICE compile time token is defined.
15 years ago
e72f424f64
Split out endpoint and pipe stream functions into new EndpointStream.c/.h and PipeStream.c/.h files.
15 years ago
4cc7f5200b
Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will not break communications with the host by exceeding the maximum control request stage timeout period.
15 years ago
1be3436e89
Moved calls to Device mode Class Driver events to after the request has been acknowledged, so that long event handlers do do skew the timing of the control requests.
...
Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control request handler.
15 years ago
81998ce297
Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel does not exist on these chips (thanks to Marco).
15 years ago
e966219834
Clarify in the documentation that the Audio demos and driver is for the Audio 1.0 specification, not the newer (and more advanced/less supported) 2.0 specification.
15 years ago
95079868bb
Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger).
15 years ago
Dean Camera