494 Commits (857a82674f1e15b3a8394a61ea3592e4d5e9afe5)

Author	SHA1	Message	Date
Dean Camera	423d4018f0	Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy. ... Minor documentation improvements.	14 years ago
Dean Camera	0595ac27d5	Commit for 101122 release.	14 years ago
Dean Camera	b87d0b45a2	Added board hardware driver support for the Microsin AVR-USB162 development board.	14 years ago
Dean Camera	8f981b5f38	Better documentation for the ANSI terminal escape codes header. ... Organise the current version changelog better to group core and non-core changes together.	14 years ago
Dean Camera	8f7437dda2	Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.	14 years ago
Dean Camera	cbc00c843a	Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.	14 years ago
Dean Camera	a9f313afa9	Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates. ... Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.	14 years ago
Dean Camera	002cd6df49	Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).	14 years ago
Dean Camera	f2324fc2b4	Second patch to fix incorrect PDI/TPI programming speed.	14 years ago
Dean Camera	d41cd9a41a	Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.	14 years ago
Dean Camera	50390867e7	Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).	14 years ago
Dean Camera	622dc6486c	Remove link to (now deleted) public Mercurial mirror in the documentation.	14 years ago
Dean Camera	0ce2950d81	Added board hardware driver support for the Adafruit U4 breakout board. ... Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct. Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).	14 years ago
Dean Camera	bac860b173	Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor.	14 years ago
Dean Camera	fb76acb084	Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.	14 years ago
Dean Camera	85cf202737	Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full.	14 years ago
Dean Camera	f275edf6eb	Remove already implemented features from the Future Changes manual page.	14 years ago
Dean Camera	ee495ca500	Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green).	14 years ago
Dean Camera	3bf760ad7d	Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times when 125KHz ISP programming mode is selected.	14 years ago
Dean Camera	40db485c79	Rename new CDC class bootloader NO_LOCK_BYTE_SUPPORT compile time option to NO_LOCK_BYTE_WRITE_SUPPORT as reads are still permitted. ... Clean up CDC bootloader command processing code.	14 years ago
Dean Camera	475323e400	Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_SUPPORT compile time options to the CDC class bootloader.	14 years ago
Dean Camera	cd57e855f6	Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions.	14 years ago
Dean Camera	b8dfa976ce	Added standard keyboard HID report scancode defines (thanks to László Monda).	14 years ago
Dean Camera	cb779e3d7d	Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.	14 years ago
Dean Camera	710f31c540	Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management tasks for each driver is called. ... The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called.	14 years ago
Dean Camera	08de757811	Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer.	14 years ago
Dean Camera	b37d77eab3	All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included. ... All LowLevel demos changed to use the constants and types defined in the USB class drivers.	14 years ago
Dean Camera	bd337aced3	Added default test tone generation mode to the Device mode AudioInput demos.	14 years ago
Dean Camera	06f222b3ed	Added board hardware driver support for the Minimus board (thanks to the PSGroove team).	14 years ago
Dean Camera	b4a02fa29d	Added board hardware driver support for the Maximus board (thanks to the PSGroove team).	14 years ago
Dean Camera	cb298295fb	Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team).	14 years ago
Dean Camera	9464fa168e	Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for the given endpoint.	14 years ago
Dean Camera	5a4def7478	Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda	14 years ago
Dean Camera	a8871c7fba	Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured. ... Small documentation improvements to explicitly reference tokens in Doxygen, to ensure that they are converted to cross-reference links in the output files.	14 years ago
Dean Camera	7aaced1e8b	Remove USB_MODE_* macros, replace with a semantically linked USB_Modes_t enum. ... Moved the USB device selection logic for ENDPOINT_TOTAL_ENDPOINTS further up in Endpoint.h to where the endpoint bank capabilities are determined, to reduce the total number of device-specific logic. Change USB_Host_WaitMS() to test and disable the HSOFI interrupt before resuming the bus, so that it does not fire before the delay loop has run. Add missing const qualifier to the parameter of USB_Host_ClearPipeStall().	14 years ago
Dean Camera	c1cfffd8eb	Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings.	14 years ago
Dean Camera	bea72a8412	Minor documentation enhancements.	14 years ago
Dean Camera	292a631b62	Added new NO_SOF_EVENTS compile time option, enabled in the bootloaders to reduce the compiled binary size.	14 years ago
Dean Camera	ccc82ce745	Added board hardware driver support for the Busware CUL V3 board. ... Added SVN eol-style property to the library driver files that are missing it.	14 years ago
Dean Camera	accadba2dd	Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called.	14 years ago
Dean Camera	3ae9e6042f	Cache the USB_DeviceState variable internally in the library core when multiple checks are required in a single loop iteration, to reduce compiled code size.	14 years ago
Dean Camera	93793679c9	Revert change to the AVRISP-MKII project for fuse byte programming via the CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.	14 years ago
Dean Camera	a447ae134f	Fixed broken lock byte programming in the AVRISP-MKII clone project for some XMEGA targets.	14 years ago
Dean Camera	824ce10390	Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used.	14 years ago
Dean Camera	a1e453e900	Make Host mode Class drivers only set the class driver instance's state values once a compatible interface has been found within the device.	14 years ago
Dean Camera	86367574e6	Fix incorrectly named configuration descriptor callback routines in the host mode class drivers. ... Fix typo in MIDI low level device demo.	14 years ago
Dean Camera	7166c7ba3e	Fix low level host mode demos not correctly fetching the next endpoint when an invalid interface is discarded. ... Update the pipe configuration routines in the host mode class drivers so that they use the same new code to enumerate compatible devices to increase reliability. Add support to the host mode class drivers for non-sequential (but non-overlapping with other interface) pipe numbers.	14 years ago
Dean Camera	158afe9109	Reverted Endpoint/Pipe non-sequential configuration hack, placed restriction on the configuration order instead to ensure maximum reliability. ... Altered all low level device and host mode demos to ensure that endpoints and pipes are configured in ascending order properly. Rewrote all low level host mode demos' configuration descriptor parser code to ensure that pipes are enumerated in ascending order, and to ensure maximum compatibility with devices. Incremented all device mode demo's device descriptor revision numbers to ensure that any descriptor changes are re-fetched on machines which have enumerated previous versions.	14 years ago
Dean Camera	a509729b2d	Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive. ... Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set.	14 years ago
Dean Camera	25d896a507	Added board hardware driver support for the Arduino Uno development board. ... Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver.	14 years ago