da138684e4
Added module file dependancy information to the USB class drivers.
16 years ago
312748702a
Added better module summaries.
16 years ago
e9215b4b36
Fix broken Pipe stream function templates due to mixed const/no const use in prototypes.
16 years ago
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
16 years ago
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
a54ed0085b
Seperated out parts of the PrinterHost incomplete demo into a seperate Lib subdirectory.
...
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
16 years ago
23f3c3deee
Fixed compilation error in incomplete BluetoothHost demo.
16 years ago
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
16 years ago
b462f2d457
Minor correction to MagStripe demo to fix build problems.
16 years ago
86e6ed7f31
Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, no need to call Dataflash_ToggleSelectedChipCS() afterwards.
...
Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index.
Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%.
16 years ago
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
16 years ago
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
16 years ago
7366f590f5
Rename some of the library documentation files.
16 years ago
3bd4011c09
Split Getting Started page of the documentation into its own section.
16 years ago
1756087c3e
Optimize vendor/product description string display code in MassStorageHost.
...
Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.
Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.
Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
16 years ago
b2cf4d3222
Oops - SCSI INQUIRY data uses fixed-length, non-terminated strings -- need to copy the strings to a temp buffer and terminate before using them in printf.
16 years ago
64937a6206
MassStorageHost demo now retrieves Inquiry data from the device during enumeration, and prints the device's Vendor and Product IDs.
16 years ago
bb23e55f11
Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.
16 years ago
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
16 years ago
7f81803aaa
Fixed CDCHost demo unfreezing IN pipes during configuration, rather than during use.
...
Changed Pipe stream functions to automatically set the pipe token, allowing them to be used on bidirectional pipes without having to explicitly call Pipe_SetPipeToken() beforehand.
16 years ago
189d0c7e66
Add demos/bootloaders/projects overview to the manual.
16 years ago
7d7573e4e5
Corrected the ADC driver for the ATMEGA16U4 and ATMEGA32U4 (thanks to Opendous Inc.).
16 years ago
a34cccf099
Optimize unique serial number reading code for size -- remove atoi/toupper references, replace with hand-rolled code as the input has known size constraints.
16 years ago
7d391eb04c
Add NO_INTERNAL_SERIAL compile time option to bootloaders to prevent them from having unneccesary size increases from unused code.
16 years ago
730624f745
Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.
16 years ago
9d506553aa
Trim unique serial number created by the USE_INTERNAL_SERIAL option to 12 characters rather than 20 - apparently Windows will implode if a serial number is too long.
16 years ago
e0420015df
Re-add signature byte defines to the DFU and CDC class bootloaders -- the SIGNATURE_x defines in the AVR device header files only exist in a newer version of avr-libc than is in the Debian repositories, causing build issues on Linux.
16 years ago
b2de451959
Add new temp LUFA project logo to the manual.
16 years ago
00d0883507
Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.
16 years ago
35bdada24b
Clean up RNDIS demo type define names.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
16 years ago
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
16 years ago
0d8679cf6b
Re-add in simple scheduler for compatibility with legacy code, mark all scheduler related files as deprecated.
16 years ago
8bc3a91c1f
Fix broken MagStripe project.
16 years ago
d475ea4394
Oops - restore deleted MissileLauncher project, fix all spelling errors for "missile". TODO: Learn how to actually spell.
16 years ago
59e87d4df0
Fix spelling of the MissileLauncher project directory.
16 years ago
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
16 years ago
e338cb6f32
Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.
...
Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.
Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.
Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().
16 years ago
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
16 years ago
f33b282009
Add MissleLauncher project to the /Projects/ makefile. Add missing MissleLauncher Doxygen.conf file.
16 years ago
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
16 years ago
39d07c3da0
Added USB Missle Launcher project, submitted by Dave Fletcher.
16 years ago
b5ca3990c2
Added new USB_Host_SetDeviceConfiguration() convenience function. Change over Low Level host demos to use the new routine.
16 years ago
ab76c52e14
Move main library documentation pages into a new ManPages subdirectory.
16 years ago
84d7783350
Remove ConfigDescriptor.c/.h files from the ClassDriver Host demos, as they will be obsoleted when the Host mode class drivers are complete. Add new StillImage stub class driver common header.
16 years ago
345506b11c
Add author image to library documentation.
16 years ago
48b3c9976c
Use sub pages in main library documentation to improve readability.
16 years ago
b61049f722
Fixed broken HIDReportParser.c.
16 years ago
Dean Camera