b8fd4dd51c
Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab).
14 years ago
64fe1cd0b2
Rename RingBuffer header functions and typedefs from RingBuff_* to RingBuffer_* so that it matches the header name.
14 years ago
cb9ef559a0
Fixed inverted Minimus board LEDs.
14 years ago
6026b9128b
Fix compile errors from the changes to the SerialStream and board Temperature drivers.
14 years ago
c05e7cd7d9
More minor documentation corrections.
14 years ago
a8b66f318d
Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.
14 years ago
2073b96d82
Added basic driver example use code to the library documentation.
...
Made the USARTStream global public and documented in the SerialStream module, allowing for the serial USART stream to be accessed via its handle rather than via the implicit stdout and stdin streams.
14 years ago
39ac72f2d1
Make a new general RingBuffer.h misc library driver, instead of the per-application LightweightRingBuff.h ring buffers. Change over projects to use the new driver.
...
Add ORDERED_EP_CONFIG to the device Projects (only) that use only a single class driver, or where the endpoint ordering is fixed, to save on compiled binary size.
Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointers.
14 years ago
12418e6eaf
Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and increase maintainability of the code.
14 years ago
958b20a8ef
Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target memory space that is only byte (not page) addressable.
14 years ago
bfa622d27e
Much more efficient algorithm for the Endpoint/Pipe configuration routine of unordered endpoints/pipes - only reconfigure the endpoints and pipes above the newly configured endpoint/pipe, and don't cache existing endpoint/pipe configuration before use to save SRAM.
14 years ago
ec537fd84d
Re-add in old Endpoint/Pipe workaround for unordered pipes - add new ORDERED_EP_CONFIG compile time option to override the workaround and use the previous behaviour that imposes correct Endpoint/Pipe ordering but produces smaller compiled code.
14 years ago
a57287a59f
Fix a few more incorrectly ordered endpoint initialisations in the device demos.
14 years ago
cbafc306b2
Fixed incorrect endpoint initialisation order in the LowLevel DualVirtualSerial demo (thanks to Rick Drolet).
14 years ago
0aa950c241
Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.).
...
Add extra comments to the ISPTarget.c source file in the AVRISP-MKII clone project.
14 years ago
46677b4589
Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski).
14 years ago
b67f9f3669
Added new RingBuffer_Peek() function to the lightweight ring buffer headers.
14 years ago
8a7351c760
Added new completed MIDIToneGenerator project.
14 years ago
b20d25854d
Fixed HID hpst class driver incorrectly binding to HID devices that do not have an OUT endpoint.
14 years ago
ed9d77aeee
Refactored Host mode Class Driver *_Host_ConfigurePipes() routines to be more space efficient when compiled.
...
Added new *_ENUMERROR_PipeConfigurationFailed error codes for the *_Host_ConfigurePipes() routines.
14 years ago
1c74525d2f
Fixed broken USBFOO board drivers due to missing BOARD_USBFOO define.
14 years ago
c879887dce
Fixed broken HID_REQ_GetReport request handler in the Low Level GenericHID demo.
14 years ago
82fa9149d7
Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground.
14 years ago
9f7883fa2b
Added ability to write protect Mass Storage disk write operations from the host OS.
14 years ago
b634ec50a0
Changed the XPLAINBridge software UART to use the regular CTC mode instead of the alternative CTC mode via the Input Capture register, to reduce user confusion.
14 years ago
423d4018f0
Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy.
...
Minor documentation improvements.
14 years ago
0595ac27d5
Commit for 101122 release.
14 years ago
b87d0b45a2
Added board hardware driver support for the Microsin AVR-USB162 development board.
14 years ago
55da77d85f
Remove internal USB_Device_NibbleToASCII() function in favour of manually inlined code to prevent compilation errors in -O0 optimisation level.
14 years ago
8f981b5f38
Better documentation for the ANSI terminal escape codes header.
...
Organise the current version changelog better to group core and non-core changes together.
14 years ago
8f7437dda2
Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
14 years ago
cbc00c843a
Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode.
14 years ago
a9f313afa9
Slow AVRISP-MKII clone PDI/TPI programming speed back to 250KHz due to issues with the XPLAINBridge when PDI programming at faster rates.
...
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
14 years ago
002cd6df49
Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light).
14 years ago
f2324fc2b4
Second patch to fix incorrect PDI/TPI programming speed.
14 years ago
d41cd9a41a
Fixed PDI/TPI programming speed of ~250KHz in the AVRISP-MKII Clone project, instead of the desired 500KHz.
14 years ago
50390867e7
Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics).
14 years ago
622dc6486c
Remove link to (now deleted) public Mercurial mirror in the documentation.
14 years ago
0ce2950d81
Added board hardware driver support for the Adafruit U4 breakout board.
...
Fixed calculation of timer register reload values derived from F_CPU; must subtract one from the division result for the compare value to be correct.
Change AVRISP-MKII rescue clock speed to 4MHz to ensure that a 125KHz ISP speed works regardless of the target's fuses (i.e. DIV8 set).
14 years ago
bac860b173
Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor.
14 years ago
210bd4db24
Fix documentation reference error.
14 years ago
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
14 years ago
85cf202737
Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full.
14 years ago
8f9b5ae00d
Minor documentation improvements.
14 years ago
f275edf6eb
Remove already implemented features from the Future Changes manual page.
14 years ago
ee495ca500
Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green).
14 years ago
5ce8380a7d
Fix XPLAINBridge code broken during the changes to the Rescue Clock generation in the AVRISP-MKII clone project.
...
Change over all low level host mode project's descriptor comparator routines to perform the descriptor casting in a temp variable to make the code clearer and easier to modify (despite being more verbose).
14 years ago
3bf760ad7d
Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times when 125KHz ISP programming mode is selected.
14 years ago
40db485c79
Rename new CDC class bootloader NO_LOCK_BYTE_SUPPORT compile time option to NO_LOCK_BYTE_WRITE_SUPPORT as reads are still permitted.
...
Clean up CDC bootloader command processing code.
14 years ago
475323e400
Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_SUPPORT compile time options to the CDC class bootloader.
14 years ago
Dean Camera