31a34154db
Move out RFCOMM channel structure init code to a seperate routine, to save on compiled code space and to prevent copy-paste errors.
15 years ago
fbabecee66
Add RFCOMM service routine, to send pending configuration requests on RFCOMM channels. Add in RFCOMM channel config flags, to determine which configuration commands have been sent and received.
...
Add a new RFCOMM_SendChannelSignals() function to transmit a change in V24 terminal handshake lines to the receiving device.
Prevent SABM packets sent to the control DLCI in the RFCOMM layer from creating a new channel entry, as the control DLCI does not have connection data associated with it.
Fix up MSC control packet handling so that received responses can be acknowledged correctly, so that the RFCOMM layer can record when the receiving device has ACKed a sent change in V24 terminal handshake lines.
15 years ago
b656540468
Make Bluetooth ACL channel searches skip over closed (invalid) channels. RFCOMM channels are considered invalid when the channel state is closed, not when the DLCI is zero - fix incorrect code.
15 years ago
d29a408ffd
Add default "all" makefile targets to the demo tree makefiles.
15 years ago
016a4c068a
Make loops in AVRISP-MKII Clone project's XPROG protocol infinite rather than looping on the timeout value, as this is already checked inside the loop anyway.
15 years ago
26afe5fe9e
Fix Doxygen formatting of parameters for the CALLBACK_HID_Device_CreateHIDReport() function in the ClassDriver HID device demos.
15 years ago
55d7e1e65b
Make XPLAINBridge serial bridge much more reliable for the reception of characters from the XMEGA through the software UART interface.
15 years ago
ad29e79b94
Maximise the size of the ring buffers in the Benito/XPLAINBridge/USBtoSerial projects, so that they should never become full under normal conditions.
15 years ago
4b952d479a
Split RFCOMM channel signals into Remote and Local pairs. Use memcpy() to copy over data from the command parameters to the RFCOMM response parameters.
...
Ensure that only the valid parameter bytes are sent back in response to MSC commands.
15 years ago
2eff731ecf
Add TEST RFCOMM command handler. Remove the RFCOMM channel UseUIFrame element, as the Bluetooth adaptions to RFCOMM only allow UIH frames to be used.
15 years ago
559af02204
Use a bitmask instead of an array of bools in the SDP UUID List matching algorithm to reduce the compiled code size and stack used.
15 years ago
e621ab33be
Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space.
...
Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time.
15 years ago
988604b25d
Moved calls to V2Params_UpdateParamValues() out of the main AVRISP-MKII and XPLAINBridge project loops and into the AVRISP management function.
15 years ago
51c2dcf3b0
Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project.
15 years ago
deed746d37
Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT().
...
Minor tweaks to the library documentation.
15 years ago
69dc32c5f0
Fix compile and Doxygen errors due to the spell-check changes in the source code.
15 years ago
711542ee89
Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.
15 years ago
13ea700b35
Rename RFCOMM_GetFrameDataLength() to RFCOMM_GetVariableFieldValue() as it is multi-purpose, and modify it to move the buffer pointer itself rather than relying on the caller.
...
Make RFCOMM_GetChannelData() return NULL if the required channel DLCI is found, but the channel is closed.
Add modem signals (BREAK, DCD, etc.) to the channel state array, and add in a handler for the Modem Status RFCOMM control command.
15 years ago
f5d079462d
Changed the RFCOMM-specific ItemProtocolChannel_t type to a more generic ItemProtocol_8BitParam_t name, and added a new ItemProtocol_16BitParam_t to the SDP protocol type defines.
15 years ago
3125fd5f4f
Add RFCOMM channel configuration parsing and channel states to the incomplete BluetoothHost demo.
...
Add missing BT_* prefix to the Bluetooth stack's channel state enum values.
15 years ago
dcedde0123
Fix HID parser documentation for the default maximum report/path/etc. elements so that it matches the current code values.
15 years ago
a14ece5f57
Change over Doxygen \note documentation to \pre where applicable.
15 years ago
27fb44268f
Update TemperatureDataLogger and Webserver projects to the latest FATFS library version.
15 years ago
67bc625109
Split out the RFCOMM Control Channel command processing code into a seperate set of files for clarity.
15 years ago
b522e35965
Rename the incomplete Bluetooth Host demo's ServiceDiscoveryProtocol.c/.h files to SDP.c/.h. Fix compile errors in RFCOMM.c/.h.
15 years ago
637c7b01d0
More RFCOMM layer additions - begin to add multiplexer channel state variables.
15 years ago
d57e7369a2
Oops - temp code left in the XPLAINBridge project which prevented it from entering programmer mode.
15 years ago
036a156ff4
Slight improvements to the reliability of the software UART in the XPLAINBridge project.
15 years ago
931ca42a6e
Minor fixes to demos to add in some missing comments, printf() formatting. Make incomplete Bluetooth demo indicate connections visually via the board LEDs.
15 years ago
75d440ace3
Speed up calls to Pipe_IsPipeBound() by immediately skipping unconfigured pipes, rather than performing token check first.
15 years ago
5fa0e9c007
Oops - light weight ring buffer documentation used \ref instead of \param to document function parameters.
15 years ago
b02217d745
Add missing documentation to the lightweight ring buffer code in the XPLAINBridge project.
15 years ago
f73f01235e
Update main library makefile with missing source files for the "clean" rule.
15 years ago
5ce3f0b17b
Add missing ATTR_NON_NULL_PTR_ARG and ATTR_ALWAYS_INLINE attributes to class driver functions.
15 years ago
96063b9f98
Add Mecurial repository mirror link to the library documentation.
15 years ago
e930738247
Add stub RFCOMM command handlers. Move out RFCOMM frame length and data pointer calculations to the master RFCOMM frame reception routine, instead of inside each frame type handler function.
15 years ago
f92229697f
More RFCOMM layer implementation - fix FCS calculation, add in start of control channel command processing.
15 years ago
34e0fed4ca
Make the RFCOMM_SendFrame() function correctly generate frames from the input parameters, change addressing to use the raw DLCI address plus flags.
15 years ago
361e1ec1d8
Refactor out RFCOMM packet send code into a seperate function.
15 years ago
7aec6cba1a
Fix incorrect copyright attribution on the class-driver keyboard demos due to header copy-pasting.
15 years ago
c2e340320c
Document lightweight ring buffer header files.
15 years ago
2dabb4e55f
Add the svn:eol-style property onto new files which where missing it to ensure uniform line endings.
15 years ago
efbedcfa54
Document Bluetooth files with overall file Doxygen comments. Add more initial RFCOMM layer code to receive and respond to SABM packets.
15 years ago
be09f64872
Fixed incorrect function references in the Mass Storage Class driver documentation.
15 years ago
6d53cdba83
More documentation fixes.
15 years ago
fc92f9969c
Minor documentation cleanups.
15 years ago
9293de2491
Start implementation of RFCOMM decoding layer. Add new service initialize routines for each Bluetooth service - currently unused, but will eventually reset the service state of RFCOMM when a new connection is made.
15 years ago
13d812a718
Delay needed in bluetooth code due to the send function not waiting for the pipe bank to become ready before writing. Add in a call to Pipe_WaitUntilReady() to fix the issue.
15 years ago
a405a9bdf8
Extra protocol value in the RFCOMM protocol is the channel number, not the PSM - update typedef name and size.
...
Add delay to the Connection Request signal processing routine - without this, the host will not create the RFCOMM channel correctly. Need to investigate why this delay is needed.
15 years ago
480da5aab6
Add PSM value to the RFCOMM service so that the host knows what PSM to use on channels when trying to access it.
15 years ago
Dean Camera