6928f17b64
Extend the automatic serial number descriptor code to read out and send all 10 bytes (20 characters) of the internal serial number on supported AVRs, rather than just the first 6 bytes (12 characters).
16 years ago
7f3f39b575
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.
...
Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
16 years ago
e426463355
Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
16 years ago
c1be307393
Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, the latter of which is used in the bootloaders, to reduce code size.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
16 years ago
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
16 years ago
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
16 years ago
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
16 years ago
cbbd3d746a
Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.
16 years ago
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
16 years ago
7a5d045987
Slight changes to TeensyHID bootloader to ensure it builds under the 2KB boundary.
...
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
16 years ago
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
16 years ago
292fc9b65e
Move unfinished SideShow source files to nested Lib directory for clarity.
16 years ago
f3c061d5c8
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).
...
Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
16 years ago
9d2613d908
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
16 years ago
c619e21fa7
Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models.
16 years ago
32086e4f14
Fix small error in last commit preventing compilation in some circumstances.
16 years ago
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
16 years ago
f85a53a31b
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.
...
Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).
Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
16 years ago
da138684e4
Added module file dependancy information to the USB class drivers.
16 years ago
312748702a
Added better module summaries.
16 years ago
e9215b4b36
Fix broken Pipe stream function templates due to mixed const/no const use in prototypes.
16 years ago
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
a54ed0085b
Seperated out parts of the PrinterHost incomplete demo into a seperate Lib subdirectory.
...
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
16 years ago
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
16 years ago
3cbdcd3686
Reduce struct name pollution - group typedef struct names by class driver name where appropriate.
16 years ago
1756087c3e
Optimize vendor/product description string display code in MassStorageHost.
...
Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed.
Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails.
Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
16 years ago
bb23e55f11
Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command.
16 years ago
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
16 years ago
7f81803aaa
Fixed CDCHost demo unfreezing IN pipes during configuration, rather than during use.
...
Changed Pipe stream functions to automatically set the pipe token, allowing them to be used on bidirectional pipes without having to explicitly call Pipe_SetPipeToken() beforehand.
16 years ago
7d7573e4e5
Corrected the ADC driver for the ATMEGA16U4 and ATMEGA32U4 (thanks to Opendous Inc.).
16 years ago
a34cccf099
Optimize unique serial number reading code for size -- remove atoi/toupper references, replace with hand-rolled code as the input has known size constraints.
16 years ago
730624f745
Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code. Updated Mass Storage and CDC based demos to use the new device serial number if the device it is compiled for supports it.
16 years ago
9d506553aa
Trim unique serial number created by the USE_INTERNAL_SERIAL option to 12 characters rather than 20 - apparently Windows will implode if a serial number is too long.
16 years ago
00d0883507
Added USE_INTERNAL_SERIAL compile time option to automatically read out the internal unique serial number as the device's serial number descriptor on supported AVR models.
16 years ago
35bdada24b
Clean up RNDIS demo type define names.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
16 years ago
0d8679cf6b
Re-add in simple scheduler for compatibility with legacy code, mark all scheduler related files as deprecated.
16 years ago
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
16 years ago
e338cb6f32
Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint.
...
Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor.
Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption.
Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().
16 years ago
dcf303762a
Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors.
...
Change MIDI demos to use real MIDI command values, and shift for the USB wrapper, rather than shift for the MIDI bytes. This is a little confusing for the MIDI USB wrapper, but allows for the use of real standardized MIDI command values.
16 years ago
b5ca3990c2
Added new USB_Host_SetDeviceConfiguration() convenience function. Change over Low Level host demos to use the new routine.
16 years ago
84d7783350
Remove ConfigDescriptor.c/.h files from the ClassDriver Host demos, as they will be obsoleted when the Host mode class drivers are complete. Add new StillImage stub class driver common header.
16 years ago
b61049f722
Fixed broken HIDReportParser.c.
16 years ago
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
16 years ago
Dean Camera