61ff4824a9
Changed AudioOutput demos to explicitly use timer 3 - the smaller USB AVRs where timer 1 was needed instead did not have the endpoint size neccesary for good audio throughput anyway.
...
Fix Benito documentation indicating erronously that the project used the HID USB class instead of the CDC class.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
16 years ago
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
16 years ago
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
16 years ago
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
16 years ago
cbbd3d746a
Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.
16 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
16 years ago
3991c94b38
Ensure new Benito Programmer project matches Don's established LED behaviour - flash LED while generating target /RESET pulse, ping-pong LEDs during enumeration.
16 years ago
2a0c28e6e4
Minor updates to the Benito programmer - remove redundant PORT register manipulations.
16 years ago
06f3a6a876
Tweaks to the new Benito Programmer project for documentation and port/pin usage.
16 years ago
a6e85d6ed8
Added new Benito project, a simple modified USB-to-Serial bridge for the programming of AVRs using the official Arduino bootloader.
16 years ago
5dbfdaa17d
Ensure that the USB_DeviceState variable is properly set upon wakeup events, to the Addressed or Configured state as needed.
...
Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board.
Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
16 years ago
7a5d045987
Slight changes to TeensyHID bootloader to ensure it builds under the 2KB boundary.
...
Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
44179abcf8
Add PrinterHost demo to the documentation.
16 years ago
d0db78432f
Add extra tests to the MassStorage device demo and class driver for validating command blocks from the host.
16 years ago
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
16 years ago
bf50959b80
Simplify SideShow GUID compares via a macro.
16 years ago
86819ba9d8
Fixes to unfinished SideShow demo to re-enable correct building after previous commit.
16 years ago
292fc9b65e
Move unfinished SideShow source files to nested Lib directory for clarity.
16 years ago
18f7cd3325
Ensure control pipe is selected in the PrinterHost demo before trying to send control requests.
16 years ago
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
16 years ago
73a21890f6
Added missing DoxyGen configuration file to the PrinterHost demo.
16 years ago
8a28fd8e6c
Added extra DoxyGen documentation to the new PrinterHost demo.
16 years ago
3ee3ed2d6d
Add PrinterHost to the project file and Host LowLevel directory makefile.
16 years ago
2a90f66de2
Moved PrinterHost demo from Incomplete to LowLevel, as it is now near-complete.
16 years ago
f3c061d5c8
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).
...
Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
16 years ago
211712d66d
Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.
16 years ago
4c035b14f1
Cleaner solution to the PrinterHost data send routine problem of embedded NULLs - use a special structure to hold the data string plus the length in bytes of the data.
16 years ago
5d8cdd9bea
Fix unfinished printer host demo - some printer languages use embedded NULLs and so strlen() won't work in all cases. Ensure NULL terminator for the test page is not transmitted to the device.
16 years ago
8a68203d34
Added error codes to most StillImageHost demo commands.
16 years ago
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
16 years ago
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
16 years ago
786479faf0
Add partial project documentation to the incomplete PrinterHost demo.
...
Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure.
Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.
16 years ago
d3fb6273aa
Fix PrinterHost demo so that it will only enumerate printers with Bidirectional protocol encapsulation. Change enumeration code to automatically select the correct alternate setting for the printer interface to select the bidirectional protocol.
16 years ago
9d2613d908
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
16 years ago
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
16 years ago
d6543dee0d
Minor updates to the Magstripe and MissileLauncher projects to fix bugs and improve performance.
...
Fixed error in GenericHID descriptors preventing it from passing the USB-IF HID tests (thanks to Søren Greiner).
16 years ago
c619e21fa7
Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models.
16 years ago
32086e4f14
Fix small error in last commit preventing compilation in some circumstances.
16 years ago
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
16 years ago
f85a53a31b
Fix HID class device driver -- if a SetIDle request is issued with the LSB of wValue set to zero, the idle period must be set for all HID interfaces.
...
Fix Keyboard and Mouse demos, Idle period is now multiplied by 4 as the period is read into and sent out of the device to ensure it is always stored as a multiple of 1ms. Fixes Keyboard demo using an initial Idle period of 2s rather than 500ms (thanks to Brian Dickman).
Move out the internal device serial descriptor reading routine into a seperate static function, rather than being part of USB_Device_GetDescriptor.
16 years ago
da138684e4
Added module file dependancy information to the USB class drivers.
16 years ago
312748702a
Added better module summaries.
16 years ago
e9215b4b36
Fix broken Pipe stream function templates due to mixed const/no const use in prototypes.
16 years ago
73d9fafc0f
Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions. Changed Endpoint.c and Pipe.c to use a templated system to build the seperate functions, rather than duplicating each function's code many times.
16 years ago
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
a54ed0085b
Seperated out parts of the PrinterHost incomplete demo into a seperate Lib subdirectory.
...
Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected.
16 years ago
Dean Camera