ecf7c18cf2
Fixed error in PrinterHost preventing the full page data from being sent to the attached device.
15 years ago
5908e28e8d
Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header.
...
Added basic PIMA commands to the StillImage Host Class driver - need to extend to PIMA specific command functions.
15 years ago
f9f1bcc25c
Oops - with new changes to the way the device Configuration Descriptor is retrieved from the device, ensure that the correct position pointer is cast when extracting descriptor parameters.
15 years ago
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
15 years ago
3dce79d68c
Added start of the Still Image Host Class driver demo and driver code.
...
Re-enabled building of the Host mode demos ClassDriver directory.
15 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
15 years ago
922e60192d
Condensed SCSI command functions in the LowLevel Mass Storage Host demo, to save on FLASH space.
...
Fixed issue in AVRISP project where the target RESET line was being toggled before it was tristated, causing problems synchronising to some targets (thanks to Mike Alex).
15 years ago
754ea083d4
Fix memory corruption in Host mode Mass Storage Class driver.
15 years ago
559ca2ba04
Added MS_Host_TestUnitReady() and MS_Host_ReadDeviceCapacity() to the host mode Mass Storage Class driver.
15 years ago
a765f71727
Add SCSICodes.h to the Class Driver Common folder, and automatically include it in both the Host and Device Mass Storage Class drivers. Delete existing version from the ClassDriver MassStorage device demo's /Lib/ folder.
15 years ago
31d8ebebc0
Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects/Host/ makefile.
...
Add more skeleton functions and definitions to the Mass Storage Host mode Class driver.
Made Endpoint_Write_DWord_* functions echo the structure of the matching Endpoint routines for clarity.
15 years ago
ee744abb7e
More work on the Mass Storage Host mode Class driver.
...
Added ATTR_NON_NULL_PTR_ARG() attributes to the class drivers to improve user code reliability by disallowing explicit NULL pointers as pointer parameters in function calls where the parameter must not be NULL.
Disabled building of the Demos/Host/ClassDriver directory until Host Mode Class drivers are complete to prevent build errors in the meantime.
15 years ago
99abd1a8b7
Added explicit attribute masks to the device mode demos' descriptors.
15 years ago
df5500e81c
Added CDC_Device_Flush() command to the CDC Device mode class driver.
...
Minor updates to the unfinished SideShow demo for clarity.
Added unfinished MassStorageHost class driver demo.
15 years ago
c86491af8b
Add new functions to the HID host class driver, refine HID interface protocol matching.
...
Remove stray state variable from the CDC host class driver.
15 years ago
a2001ac1cc
Fixed swapped paremeters in the HID state memory copy call while processing a HID PUSH item in the HID report parser.
...
Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed.
Make RNDIS device class driver include the CDC device class driver header, so that it can inherrit the required CDC functional descriptor macro.
Make HID host class driver include the HID report parser.
15 years ago
8711dc7ced
Fix issue in CDC device class driver where received data the size of the data endpoint could lock up the driver.
...
Further work on the new CDC and HID host mode class drivers.
Reset changelog et. al. to reset development information for the new version currently under development.
15 years ago
85c2716f2d
Make Benito ping-pong LED code more explicit, using masks of the TX and RX LED masks for ping-pong toggle rather than the ambiguous LED "Busy" mask.
...
Fix incorrect event name in MassStorageHost.c.
15 years ago
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
15 years ago
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
15 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
15 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
15 years ago
7f3f39b575
Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits.
...
Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered.
15 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
15 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
15 years ago
b9dd51cd63
Collapse configuration descriptor size retrieval and size testing into a single if statement within the new host mode class driver demos for clarity.
15 years ago
84c3c4a3d9
Change Host mode class driver Pipe configuration routines -- better to let the application fetch the configuration descriptors once, and then pass them to each class driver in turn.
15 years ago
5251bc6e4e
Add new MouseHost Class Driver demo, unfinished, to allow for better testing of the new prototype Host Mode Class Driver framework. Flesh out start of a HID class Host mode class driver.
15 years ago
05fa6e0c43
Corrected new Pipe_IsEndpointBound() function.
...
Completed host CDC class driver enumeration code.
15 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
15 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
15 years ago
44179abcf8
Add PrinterHost demo to the documentation.
15 years ago
67f390fe74
Add explicit guards to all device mode tasks to ensure the device is connected and configured before running the task, to prevent any user tasks from locking up the main USB task if the device has not been properly configured.
15 years ago
18f7cd3325
Ensure control pipe is selected in the PrinterHost demo before trying to send control requests.
15 years ago
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
15 years ago
73a21890f6
Added missing DoxyGen configuration file to the PrinterHost demo.
15 years ago
8a28fd8e6c
Added extra DoxyGen documentation to the new PrinterHost demo.
15 years ago
3ee3ed2d6d
Add PrinterHost to the project file and Host LowLevel directory makefile.
15 years ago
2a90f66de2
Moved PrinterHost demo from Incomplete to LowLevel, as it is now near-complete.
15 years ago
f3c061d5c8
Fixed PrinterHost demo Printer_GetDeviceID() routine not removing the Device ID string length from the start of the returned array (thanks to John Andrews).
...
Fixed error in new pipe stream function template system not setting the right device token for R/W operations (also thanks to John Andrews).
15 years ago
211712d66d
Remove ClearPipeStall routine from the StillImageHost demo, as there is now a version of the function built into the library itself.
15 years ago
4c035b14f1
Cleaner solution to the PrinterHost data send routine problem of embedded NULLs - use a special structure to hold the data string plus the length in bytes of the data.
15 years ago
5d8cdd9bea
Fix unfinished printer host demo - some printer languages use embedded NULLs and so strlen() won't work in all cases. Ensure NULL terminator for the test page is not transmitted to the device.
15 years ago
8a68203d34
Added error codes to most StillImageHost demo commands.
15 years ago
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
15 years ago
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
15 years ago
786479faf0
Add partial project documentation to the incomplete PrinterHost demo.
...
Change over Printer_GetDeviceID() to require a pointer to the destination buffer plus the buffer size, rather than using a pointer to a special structure.
Make new Printer_SendData() function to hide the implementation of sending data to an attached printer, cleaning up the main demo source file body.
15 years ago
d3fb6273aa
Fix PrinterHost demo so that it will only enumerate printers with Bidirectional protocol encapsulation. Change enumeration code to automatically select the correct alternate setting for the printer interface to select the bidirectional protocol.
15 years ago
9d2613d908
Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews).
15 years ago
b243c2b80b
Magstripe Project: Ensure that empty tracks still print out a newline seperator so that the host always knows what track data is being sent.
...
Updates to PrinterHost demo to include some PCL test data plus fixes to the GetDeviceID routine.
15 years ago
Dean Camera