f9f1bcc25c
Oops - with new changes to the way the device Configuration Descriptor is retrieved from the device, ensure that the correct position pointer is cast when extracting descriptor parameters.
16 years ago
7fbb759287
Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks and data validations internally, to simplify user code.
16 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
16 years ago
c830fcb0e1
Make Endpoint control transfers more reliable; early-abort when an incomplete packet is sent from the host (indicating end of transfer), add check for control reads to ensure that no more than wLength bytes are read from the interface.
...
Condense sequential printf_P/puts_P calls to single printf_P calls for size and clarity.
16 years ago
4421782b7f
Make Control Endpoint stream transfers more reliable by adding in early aborts for unexpected new SETUP tokens, or unexpected status stage during control stream writes.
...
Fix corruption in Device RNDIS demos TCP stack when too many connections attempted simultaneously, freezing the device when a page was re-fetched before the first connection was closed.
Fix incorrect model compatibility information in the Host LowLevel demo overview text files.
16 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
200821fe82
Added new LEDs_ToggleLEDs() function to the Board LEDs driver.
16 years ago
e071f3897a
Added new USB_DeviceState variable to keep track of the current Device mode USB state.
...
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
16 years ago
4f747e7b76
Change Doxygen configuration files to not produce 4096 directories for the documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories.
...
Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
16 years ago
cf313989e6
Don't send terminal RESET codes via serial - just set the foreground colour and assume the user has the background set to something sane, so that the demos don't wipe out custom user terminal settings.
16 years ago
cc879df4f0
Use sane ANSI terminal escape codes for the Host mode demos, so that they do not cause eye-searing, unreadable text on terminals which parse the escape codes properly.
16 years ago
1d26e78258
Added compatibility list to the documentation of each individual demo.
...
Documented FAST_STREAM_TRANSFERS compile time option.
Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
16 years ago
0fcbe22c9e
Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the device has been removed (for use when an error occurs or communications with the device have completed). Changed over all host mode demos to use the new state.
...
Added verbose documentation for each of the USB Host state machine states.
16 years ago
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
16 years ago
a3a04aa671
Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling the existing \ref Pipe_SetFiniteINRequests() function.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
16 years ago
dfa547164a
Extend USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch, to add support for multi-configuration devices.
16 years ago
2b21a1552d
Remove hardcoded DOT path from all Doxygen config files.
...
Better documentation for the MissleLauncher project - add credit to PyLauncher project.
16 years ago
b5ca3990c2
Added new USB_Host_SetDeviceConfiguration() convenience function. Change over Low Level host demos to use the new routine.
16 years ago
c75f8bf223
More Doxygen fixes - ensure no undocumented function parameters.
16 years ago
ac70ddd0a1
Converted Host mode demos to schedulerless. Fixed host mode broken due to earlier Start-of-frame event experiments.
16 years ago
f1199200e1
Copy existing Host mode demos to new ClassDriver and LowLevel subfolders.
16 years ago
Dean Camera