You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
129 lines
6.1 KiB
129 lines
6.1 KiB
M0110/M0110A to USB keyboard converter
|
|
======================================
|
|
This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
|
|
Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
|
|
you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
|
|
|
|
|
|
|
|
- M0110A support was contributed by [skagon@github](https://github.com/skagon).
|
|
- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
|
|
|
|
|
|
|
|
Connection
|
|
----------
|
|
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
|
|
Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
|
|
you can change pin configuration with editing *config.h*.
|
|
|
|
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
|
|
while Macintosh keyboard cable is *straight*.
|
|
|
|
[]
|
|
|
|
In this pic:
|
|
|
|
1. `GND`(Black)
|
|
2. `CLOCK`(Red)
|
|
3. `DATA`(Green)
|
|
4. `+5V`(Yellow)
|
|
|
|
Note that wire colors may vary in your cable.
|
|
|
|
|
|
### Pinout
|
|
- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
|
|
- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
|
|
|
|
|
|
|
|
|
|
### Pull-up Registor
|
|
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
|
|
when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
|
|
In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
|
|
|
|
|
|
|
|
Building Frimware
|
|
-----------------
|
|
To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
|
|
You can edit *Makefile* and *config.h* to change compile options and pin configuration.
|
|
|
|
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
|
|
$ cd m0110_usb
|
|
$ make -f Makefile.lufa clean
|
|
$ make -f Makefile.lufa
|
|
|
|
and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
|
|
|
|
|
|
|
|
Keymap
|
|
------
|
|
You can change keymaps by editing *keymap.c*.
|
|
|
|
### M0110 & M0120
|
|
#### *Default*
|
|
,---------------------------------------------------------. ,---------------.
|
|
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
|
|
`---------------------------------------------------------' |-----------|Ent|
|
|
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
|
|
`-----------------------------------------------' `---------------'
|
|
#### *HHKB/WASD Layer(WASD/IJKL)*
|
|
,---------------------------------------------------------. ,---------------.
|
|
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| |
|
|
`---------------------------------------------------------' |-----------|Ent|
|
|
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
|
|
`-----------------------------------------------' `---------------'
|
|
|
|
### M0110A
|
|
#### *Default*
|
|
,---------------------------------------------------------. ,---------------.
|
|
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|
|
|-----------------------------------------------------' | |---------------|
|
|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| |
|
|
|---------------------------------------------------------| |-----------|Ent|
|
|
|Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| |
|
|
`---------------------------------------------------------' `---------------'
|
|
#### *Cursor Layer(WASD/IJKL)*
|
|
,---------------------------------------------------------. ,---------------.
|
|
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -|
|
|
|-----------------------------------------------------' | |---------------|
|
|
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +|
|
|
|---------------------------------------------------------| |---------------|
|
|
|Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| |
|
|
|---------------------------------------------------------| |-----------|Ent|
|
|
|Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| |
|
|
`---------------------------------------------------------' `---------------'
|
|
|
|
|
|
|
|
Debug
|
|
-----
|
|
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
|
|
|
|
The converter has some functions for debug, press `<magickey>+H` simultaneously to get help.
|
|
These function is totally undocumented, tentative, inconsistent and buggy.
|
|
|
|
magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control)
|