You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
54 lines
1.6 KiB
54 lines
1.6 KiB
# rask's BananaSplit60
|
|
|
|
|
|
|
|
## Notes
|
|
|
|
### Layers
|
|
|
|
Base layer is a regular HHKBish ANSI layer. Toggling the
|
|
alternate base layer (Fn3) makes it simpler to play games with
|
|
the left space being set to be an actual Space.
|
|
|
|
Layer 1 (Fn1) contains usual 60% functionalities such as the
|
|
F-row, while Layer 2 (Fn2) contains media controls.
|
|
|
|
The final layer (Fn4) is a special layer that acts as a lock
|
|
layer, meaning the keyboard is locked while the layer
|
|
is active. This firmware assumes a lock switch (read below).
|
|
|
|
### Lock switches
|
|
|
|
1.25u between the split space halves and the 1u key right
|
|
left of LeftArrow are to be operated with a lock switch.
|
|
If you don't have lock switches you should swap the `MO()`
|
|
calls with `TG()` calls to make the layer toggles work
|
|
with regular non/locking switches.
|
|
|
|
## How to make and flash
|
|
|
|
(These instructions are for Linux-based operating systems
|
|
with `dfu-programmer` available.)
|
|
|
|
`cd` into the `bananasplit` keyboard's directory and run
|
|
|
|
make rask
|
|
|
|
which should result in a file called `bananasplit_rask.hex` appearing
|
|
in your QMK root directory.
|
|
|
|
Now plug in your BananaSplit60 keyboard via USB. Verify
|
|
with `lsusb` that it appears. At least my PCB did not have
|
|
anything preflashed so you should see `atmega32u4` or similar
|
|
in the `lsusb` output.
|
|
|
|
Now you can flash the firmware by
|
|
|
|
$ sudo dfu-programmer atmega32u4 erase
|
|
$ cd /qmk_firmware/root/directory
|
|
$ sudo dfu-programmer atmega32u4 flash bananasplit_rask.hex
|
|
|
|
_If_ you happen to have some other `atmega32u4` based device
|
|
I suggest you plug it out before flashing your BS60 just to
|
|
prevent accidentally flashing your old device.
|