You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/keyboards/tmo50/keymaps/default/readme.md

1.4 KiB

Additional info

Matrix

You probably tried or will try to configure the keymapping to your liking. To make it easier configuring your layouts, photo of keyboards matrix will help.

TMO50 matrix

As you can see here matrix consists of 4 rows and 14 columns. But the tricky part is that topmost left key (Tab/Esc) is connected to row 3 - this is done so there's no 15th column that would connect only one key to seperate pin. This also poses an thread that you will configure your layout incorrectly because KC_TAB is not in the correct place visually in keymap.c file. Please take this into account when making changes and double-check this.

Pinout

Most of the pinout can be found in config.h but there's here's a table of all the used pins for TMO50 (including indicator LED pins)

Pin Assigned to
D5 Row 0
D3 Row 1
D2 Row 2
D0 Row 3
D1 Col 0
D4 Col 1
F0 Col 2
F1 Col 3
F4 Col 4
F5 Col 5
F6 Col 6
F7 Col 7
D6 Col 8
D7 Col 9
B4 Col 10
B5 Col 11
B6 Col 12
C6 Col 13
B7 Backlight
C7 RGB LEDs
B0 LED 4 (L4)
B1 LED 3 (L3)
B2 LED 2 (L2)
B3 LED 1 (L1)

Indicator LEDs

Their size is 2×3×4mm. The THT hole without a circle on the pcb is VCC(+) and the other one is connect to their corresponding pin.