You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
qmk_firmware/docs/zh-cn/newbs_flashing.md

308 lines
13 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# 刷新你的键盘
现在您已经构建了一个自定义固件文件,那么您就需要刷新键盘了。
## 用QMK工具箱刷新键盘
刷新键盘的最简单方法是使用[QMK 工具箱](https://github.com/qmk/qmk_toolbox/releases).
但是QMK工具箱目前仅适用于Windows和MacOS。如果您使用的是Linux或者只是希望从命令行刷新固件则必须使用 [方法概述](newbs_flashing.md#flash-your-keyboard-from-the-command-line).
### 将文件加载到QMK工具箱中
首先打开QMK工具箱应用程序。您将要在访达或资源管理器中找到固件文件。您的键盘固件可能是两种格式之一`.hex`或`.bin`。qmk会尝试将键盘的相应文件复制到“qmk_firmware”根目录中。
?> 如果您在Windows或MacOS上可以使用以下命令轻松地在资源管理器或访达中打开当前固件文件夹。
?> Windows:
start .
?> macOS:
open .
固件文件始终遵循此命名格式:
<keyboard_name>_<keymap_name>.{bin,hex}
例如,使用 `default` 布局的 `plank/rev5` 将使用以下名字:
planck_rev5_default.hex
找到固件文件后将其拖到QMK工具箱中的“Local file”框中或单击“Open”并导航到固件文件的存储位置。
### 将键盘置于DFUBootloader模式
要刷新自定义固件,您必须将键盘置于特殊的刷新模式。在此模式下,您将无法键入或使用键盘。在写入固件时,不要拔下键盘插头或以其他方式中断刷新过程,这一点非常重要。
不同的键盘有不同的方式进入这种特殊模式。如果您的键盘当前运行的是QMK或TMK而您没有得到特定的指示请按顺序尝试以下操作:
* 按住两个shift键并按 `Pause`
* 按住两个shift键并按 `B`
* 拔下键盘插头, 同时按住空格键和 `B` , 插上键盘然后等一会再放开按键
* 按下PCB底部的 `RESET` 物理键
* 找到PCB上标记有 `BOOT0``RESET`的金属点, 在插入PCB的同时短接它们
成功后您将在QMK工具箱中看到类似以下内容的消息:
```
*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
*** DFU device connected
```
### 刷新你的键盘
单击QMK工具箱中的 `Flash` 按钮。您将看到类似以下内容的输出:
```
*** Clueboard - Clueboard 66% HotSwap disconnected -- 0xC1ED:0x2390
*** DFU device connected
*** Attempting to flash, please don't remove device
>>> dfu-programmer atmega32u4 erase --force
Erasing flash... Success
Checking memory from 0x0 to 0x6FFF... Empty.
>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
Checking memory from 0x0 to 0x55FF... Empty.
0% 100% Programming 0x5600 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
0% 100% Reading 0x7000 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
Validating... Success
0x5600 bytes written into 0x7000 bytes memory (76.79%).
>>> dfu-programmer atmega32u4 reset
*** DFU device disconnected
*** Clueboard - Clueboard 66% HotSwap connected -- 0xC1ED:0x2390
```
## 使用命令行刷新键盘
首先您需要知道您的键盘使用的是哪个bootloader。通常是以下四个常见的bootloader。Pro-Micro 和 clones 使用 CATERINA, Teensy 使用 Halfkay, OLKB 键盘使用 QMK-DFU, 其他的atmega32u4芯片使用DFU。
您可以在以下文章中了解更多关于bootloader[刷新指令和Bootloader信息](flashing.md)。
如果您知道正在使用的bootloader是哪种那么在编译固件时可以向“make”命令里添加一些额外参数以自动执行刷新过程。
### DFU
对于DFU引导加载程序当您准备好编译和刷新固件时打开终端窗口并运行构建命令:
make <my_keyboard>:<my_keymap>:dfu
例如如果您的布局名为“xyverz”并且您正在为rev5 planck构建一个布局那么您可以使用此命令
make planck/rev5:xyverz:dfu
编译完成后,应输出以下内容:
```
Linking: .build/planck_rev5_xyverz.elf [OK]
Creating load file for flashing: .build/planck_rev5_xyverz.hex [OK]
Copying planck_rev5_xyverz.hex to qmk_firmware folder [OK]
Checking file size of planck_rev5_xyverz.hex
* File size is fine - 18574/28672
```
到了这个时候, 构建脚本将每隔5秒查找一次DFU。它将重复以下操作直到找到设备或将其取消。
dfu-programmer: no device present.
Error: Bootloader not found. Trying again in 5s.
一旦出现以上回显,您将需要重置控制器。然后,它应该显示与以下类似的输出:
```
*** Attempting to flash, please don't remove device
>>> dfu-programmer atmega32u4 erase --force
Erasing flash... Success
Checking memory from 0x0 to 0x6FFF... Empty.
>>> dfu-programmer atmega32u4 flash /Users/skully/qmk_firmware/clueboard_66_hotswap_gen1_skully.hex
Checking memory from 0x0 to 0x55FF... Empty.
0% 100% Programming 0x5600 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
0% 100% Reading 0x7000 bytes...
[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success
Validating... Success
0x5600 bytes written into 0x7000 bytes memory (76.79%).
>>> dfu-programmer atmega32u4 reset
```
如果您对此有任何问题,您可能需要这样做:
sudo make <my_keyboard>:<my_keymap>:dfu
#### DFU命令
有许多DFU命令可用于将固件下载到DFU设备
* `:dfu` - 这是正常选项等待DFU设备可用然后刷新固件。这将每隔5秒检查一次以查看是否出现了DFU设备。
* `:dfu-ee` - 这将刷新一个`eep`文件,而不是普通的十六进制文件。这很不常见。
* `:dfu-split-left` - 这将刷新正常固件,就像默认选项 (`:dfu`)一样. 但是这也会刷新“左侧”EEPROM文件用于分割键盘。 _这是基于Elite C的键盘的推荐选择。_
* `:dfu-split-right` - 这将刷新正常固件,就像默认选项(`:dfu`). 但是这也会刷新“右侧”EEPROM文件用于分割键盘。 _这是基于Elite C的键盘的推荐选择。_
### Caterina
对于Arduino板以及其克隆版来说(比如SparkFun和ProMicro), 准备好编译和刷新固件后,打开终端窗口并运行构建命令:
make <my_keyboard>:<my_keymap>:avrdude
比如, 你的布局叫"xyverz"你要创建一个rev2 Lets Split的布局,你要用以下命令:
make lets_split/rev2:xyverz:avrdude
固件完成编译后,它将输出类似以下的内容:
```
Linking: .build/lets_split_rev2_xyverz.elf [OK]
Creating load file for flashing: .build/lets_split_rev2_xyverz.hex [OK]
Checking file size of lets_split_rev2_xyverz.hex [OK]
* File size is fine - 27938/28672
Detecting USB port, reset your controller now..............
```
此时复位然后脚本将检测bootloader然后刷新固件。输出应该像这样:
```
Detected controller on USB port at /dev/ttyS15
Connecting to programmer: .
Found programmer: Id = "CATERIN"; type = S
Software Version = 1.0; No Hardware Version given.
Programmer supports auto addr increment.
Programmer supports buffered memory access with buffersize=128 bytes.
Programmer supports the following devices:
Device code: 0x44
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude.exe: Device signature = 0x1e9587 (probably m32u4)
avrdude.exe: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file "./.build/lets_split_rev2_xyverz.hex"
avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
avrdude.exe: writing flash (27938 bytes):
Writing | ################################################## | 100% 2.40s
avrdude.exe: 27938 bytes of flash written
avrdude.exe: verifying flash memory against ./.build/lets_split_rev2_xyverz.hex:
avrdude.exe: load data flash data from input file ./.build/lets_split_rev2_xyverz.hex:
avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex auto detected as Intel Hex
avrdude.exe: input file ./.build/lets_split_rev2_xyverz.hex contains 27938 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% 0.43s
avrdude.exe: verifying ...
avrdude.exe: 27938 bytes of flash verified
avrdude.exe: safemode: Fuses OK (E:CB, H:D8, L:FF)
avrdude.exe done. Thank you.
```
如果您对此有任何问题,您可能需要这样做:
sudo make <my_keyboard>:<my_keymap>:avrdude
此外,如果要刷新多个板,请使用以下命令:
make <keyboard>:<keymap>:avrdude-loop
当你完成了刷新后你需要按下ctrl+c或者其他正确的按键来让你的操作系统终止循环。
## HalfKay
对于PJRC设备Teensy当您准备好编译和刷新固件时打开终端窗口并运行构建命令:
make <my_keyboard>:<my_keymap>:teensy
比如, 如果你的布局叫做"xyverz"你想创建Ergodox or Ergodox EZ的布局,你要使用以下命令:
make erdogox_ez:xyverz:teensy
固件完成编译后,它将输出如下内容:
```
Linking: .build/ergodox_ez_xyverz.elf [OK]
Creating load file for flashing: .build/ergodox_ez_xyverz.hex [OK]
Checking file size of ergodox_ez_xyverz.hex [OK]
* File size is fine - 25584/32256
Teensy Loader, Command Line, Version 2.1
Read "./.build/ergodox_ez_xyverz.hex": 25584 bytes, 79.3% usage
Waiting for Teensy device...
(hint: press the reset button)
```
此时,复位键盘。完成后,您将看到如下输出:
```
Found HalfKay Bootloader
Read "./.build/ergodox_ez_xyverz.hex": 28532 bytes, 88.5% usage
Programming............................................................................................................................................................................
...................................................
Booting
```
## STM32 (ARM)
对于大多数ARM板包括Proton C、Planck Rev 6和Preonic Rev 3当您准备好编译和刷新固件时打开终端窗口并运行构建命令
make <my_keyboard>:<my_keymap>:dfu-util
例如如果您的keymap被命名为“xyverz”并且您正在为Planck Revision 6键盘构建一个布局那么您需要使用以下命令然后将键盘重新启动到bootloader在完成编译之前
make planck/rev6:xyverz:dfu-util
固件完成编译后,它将输出如下内容:
```
Linking: .build/planck_rev6_xyverz.elf [OK]
Creating binary load file for flashing: .build/planck_rev6_xyverz.bin [OK]
Creating load file for flashing: .build/planck_rev6_xyverz.hex [OK]
Size after:
text data bss dec hex filename
0 41820 0 41820 a35c .build/planck_rev6_xyverz.hex
Copying planck_rev6_xyverz.bin to qmk_firmware folder [OK]
dfu-util 0.9
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Invalid DFU suffix signature
A valid DFU suffix will be required in a future dfu-util release!!!
Opening DFU capable USB device...
ID 0483:df11
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading to address = 0x08000000, size = 41824
Download [=========================] 100% 41824 bytes
Download done.
File downloaded successfully
Transitioning to dfuMANIFEST state
```
## 试一试吧!
恭喜您! 您的自定义固件已经刷写到您的键盘
试一试,确保一切按你想的方式进行。我们写了[测试和调试](newbs_testing_debugging.md)来完善新手引导。 因此,请前往那里了解如何排除自定义功能的故障。