a287c39b84
Fix for occasional freakouts on mass storage writes.
...
Upstream's edge-detect interrupt that starts SPI transmission was not
firing. Sometimes. On some boards only. The cause was Downstream not
allowing enough time between edges for Upstream to catch the signal.
Also misc code tidyups.
8 years ago
41c0624459
Startup LED flash is now asynchronous.
...
Not only a faster startup process, but also catches some HID devices
that only work if initialised within 500ms of powerup.
8 years ago
42d6030e7b
Refactor and improve HID report item parsing
8 years ago
a98af92c23
Correctly parse HID report descriptor items with unusual lengths.
...
Thanks Logitech.
8 years ago
c68151698b
Bugfixes for keyboard support: works!!!
8 years ago
bc2bf01cbe
Keyboard support implemented, but not tested
8 years ago
9b2b8972a4
Incomplete and untested implementation of keyboard support
8 years ago
8aec6a6ca3
Fix for occasional problem when attaching mouse after powerup.
...
It turned out we were getting a "device disconnected" interrupt while
waiting for the port to enable following reset. Simply ignoring the
disconnect interrupt allows everything to work! WTF...
8 years ago
85f965eaa0
Fix for occasional timeout on writes...
...
...Downstream was not always changing state correctly after closely
spaced interrupts.
Also improve flash-write-lockout function to avoid dependency on
optimisation level.
8 years ago
637f67fc14
Implement dynamic crystal frequency selection based on board revision.
...
Also fixed minor issue in hardware revision-detection function.
8 years ago
f9b7416df0
Sleep instead of busy-wait, approx 50% power reduction!
9 years ago
6d52d3b8fc
Merge branch 'HID_parse_error_check' into USG_1.0
9 years ago
bca451bf05
Improve HID parser error checking
9 years ago
b4326d8ffa
Improve handling of >8bit input values
9 years ago
a64b89175e
Improved HID report parser compatibility
9 years ago
650d10f22c
Support disconnect/reconnect of attached HID device
9 years ago
18e811b4ee
HID report parser now handles collections.
9 years ago
c78f5b1150
HID parser and wheel support works!
9 years ago
fd14db8ccb
Implemented HID report parser. Untested!
9 years ago
6f944a33db
Fixed click-drag issue.
...
TODO: find out why 8-byte device interrupt endpoints totally fail.
WTF???
9 years ago
a5f4e52e02
More work on enumerating cheap POS mice, arrrrgh.
...
Added timeout checks and retry functionality to control transaction
state machine. But some times the device just won't talk, so we flash
the fault LED slowly to give the user some clue about what happened.
9 years ago
b80b99d9ec
Fixed enumeration issues with low-speed devices:
...
- Unexpected second port-connected interrupt on cold boot with low-speed
device connected.
- Retry on failure to get device descriptor. (We still fail after three
attempts, but that is better than failing after the first one!)
Also changed eclipse project to use external builder.
9 years ago
9918cfcb19
Mouse WORKS!11111 ...but only in boot mode, so no scroll wheel :(
9 years ago
b7298c5f65
Restructure & bugfix Upstream HID. Still some issue with Downstream...
9 years ago
4d9e26b6ef
Upstream HID bugfixes.
9 years ago
cda254c8bb
Downstream HID SPI interface done, untested.
9 years ago
56e8b99ae5
Downstream mouse support working!
9 years ago
e8a445a071
Work on Downstream HID support. Also a bunch of random tweaks.
9 years ago
b9c1b23e4b
Supported device classes that fail sanity checks are now reported with a
...
slow 'unsupported device' flash, rather than a fast 'freakout' flash.
9 years ago
0d2d4d6341
Implement flash write lockout by spamming the unlock register, then
...
checking that the correct unlock sequence fails.
9 years ago
25ff531917
Tweaks to 1.0 firmware. Not completely working yet :(
9 years ago
e29ef84861
Modify firmware for v1.0 hardware with STM32F401RC micro:
...
- Processor-specific header
- Startup file
- Linker script
- Project settings
- Debugger config script
- Debugger project settings
- Board revision detection routines
9 years ago
1262c5337a
All tabs to spaces
9 years ago
08e6846cc5
Add missing option to clock configuration
9 years ago
21de622469
Added hardware check on bootup: fault LED will light if Upstream
...
firmware is placed on Downstream hardware or vice versa.
9 years ago
2983da24b2
Changed Upstream and Downstream SPI transfers back to DMA. DMA works
...
correctly now, either because SPI is in 16-bit mode, or because I found
all the other bugs!
Doubled SPI baudrate to 10.5Mbps. Transfer speed now limited (again) by
Downstream's lack of FIFO buffering in the USB host controller.
Also disabled DMA transaction half-complete interrupt in
stm32f4xx_hal_dma.c, as it wasn't doing anything useful.
9 years ago
226e163adf
Improve Downstream error handling:
...
- Slow flash fault LED when unsupported device connected
- Disconnect downstream USB host on error
9 years ago
431a527e24
Tidy up commented DMA init code
9 years ago
58308c4a89
Added Mozilla Public License information to file headers.
...
Mozilla Public License v2.0 is compatible with the various licenses used
by ST and ARM.
9 years ago
08c8c7a6d6
Code tidyup - remove unused SPI Tx-only and Rx-only routines
9 years ago
ce03845623
Completed moving Upstream to interrupt-based SPI.
...
Although I am not entirely convinced this is necessary, as the SPI data
stall issue only appeared with optimisation off (-O0). Perhaps re-visit
this if Upstream needs more free CPU time later...
9 years ago
b9cc31d036
Crazy hardware issues, about to revert Upstream SPI from DMA to
...
interrupt transfers
9 years ago
48a6c2e2a4
Bugfixes for Downstream, including one in the USB host stack!
...
Downstream now enumerates and accepts attached USB storage devices.
9 years ago
750c2f3a21
- Implement notification of Downstream USB device removal, and
...
corresponding Upstream disconnection
- Improve Upstream handling of TxOk signal from Downstream
- Misc tweaks
9 years ago
f24714cd8c
Revisit Upstream project to:
...
- Implement Upstream state machine, with Downstream-dependent device
emulation
- Add fault LED flashing
- Improve fault handling and freakouts
- Misc bug fixes
9 years ago
fc522bae0a
Added priority elevation to Downstream USB host processing code that
...
interacts with SPI.
It elevates to USB_OTG priority to avoid preemption by SPI, DMA, or USB
interrupts thus avoiding synchronisation issues between USB host stack
and SPI interface.
Also minor improvements to Downstream error handling.
9 years ago
c1b2c191c4
Improved Downstream error handling:
...
- More sensible handling of error cases on SPI interface
- Improved Freakout macros
- Implemented automatic fault LED blinking
9 years ago
0e1fed6047
Full implementation of Downstream MSC interface, including significant
...
modifications to USB host MSC.
Also, minor tweaks to Upstream.
9 years ago
b9b6123642
Commit of Downstream before diving into USB MSC class driver
...
modifications.
Also correct project settings to compile for Cortex M4 architecture.
9 years ago
674cb621a7
Initial implementation of Downstream SPI interface and state machine.
9 years ago
Robert Fisk