readme update todo list

pull/3/head
Emard 7 years ago
parent e76db02634
commit c28b6c7126

@ -61,7 +61,12 @@ section (thicker power lines, separately routed feedback)
[ ] Silkscreen Double outline for BGA chip [ ] Silkscreen Double outline for BGA chip
[ ] Do not write silkscreen over the pads [ ] Do not write silkscreen over the pads
[ ] Silkscreen BGA names on ESP32 placeholder
[ ] Thinner copper, more spacing to SDRAM-FPGA
[ ] physically sprinkle VCC blocator capacitors under BGA
[ ] Values on silkscreen [ ] Values on silkscreen
[ ] Dedicated antenna pin
[ ] onboard 433 antenna (lower side, remove GND infill)
[x] Resistors for LEDs [x] Resistors for LEDs
[x] Move USB LEDs from bottom to top side [x] Move USB LEDs from bottom to top side
[ ] Improve SDRAM routing - use VIAs for closest pins [ ] Improve SDRAM routing - use VIAs for closest pins
@ -77,13 +82,10 @@ section (thicker power lines, separately routed feedback)
[ ] Move WiFi Disable jumper above the buttons [ ] Move WiFi Disable jumper above the buttons
[x] Sprinkle 2.2uF capacitors on power lines [x] Sprinkle 2.2uF capacitors on power lines
[ ] Spice simulation of power-up/shutdown network [ ] Spice simulation of power-up/shutdown network
[ ] Dedicated antenna pin
[ ] onboard 433 antenna
[x] 27ohm D+/D- to FT231XS [x] 27ohm D+/D- to FT231XS
[x] DIP switch (4 switches) [x] DIP switch (4 switches)
[x] MAX11123 ADC SPI [x] MAX11123 ADC SPI
[x] I2C for RTC [x] I2C for RTC
[ ] physically sprinkle VCC blocator capacitors
[x] main usb connector on top side [x] main usb connector on top side
[ ] space screw to other parts [ ] space screw to other parts
[x] move battery away from screw hole [x] move battery away from screw hole

Loading…
Cancel
Save