forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add DEBUGGING macro

Browse Source
master
Scott Lahteine 9 years ago
parent 4402760739
commit 05765fb570
3 changed files with 70 additions and 69 deletions
Show Stats Download Patch File Download Diff File

1
Marlin/Marlin.h
Unescape View File

@ -238,6 +238,7 @@ enum DebugFlags {
DEBUG_LEVELING = _BV(5)
};
extern uint8_t marlin_debug_flags;
#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
extern bool Running;
inline bool IsRunning() { return Running; }

136
Marlin/Marlin_main.cpp
Unescape View File

@ -1238,7 +1238,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("set_axis_is_at_home ", (unsigned long)axis);
SERIAL_ECHOPAIR(" > (home_offset[axis]==", home_offset[axis]);
print_xyz(") > current_position", current_position);
@ -1290,7 +1290,7 @@ static void setup_for_endstop_move() {
feedrate_multiplier = 100;
refresh_cmd_timeout();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("setup_for_endstop_move > enable_endstops(true)");
}
#endif
@ -1305,7 +1305,7 @@ static void setup_for_endstop_move() {
*/
void prepare_move_raw() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("prepare_move_raw > destination", destination);
}
#endif
@ -1337,7 +1337,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = corrected_position.z;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("set_bed_level_equation_lsq > current_position", current_position);
}
#endif
@ -1372,7 +1372,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = corrected_position.z;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("set_bed_level_equation_3pts > current_position", current_position);
}
#endif
@ -1396,7 +1396,7 @@ static void setup_for_endstop_move() {
long start_steps = st_get_position(Z_AXIS);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("run_z_probe (DELTA) 1");
}
#endif
@ -1417,7 +1417,7 @@ static void setup_for_endstop_move() {
current_position[Z_AXIS] = mm;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("run_z_probe (DELTA) 2 > current_position", current_position);
}
#endif
@ -1460,7 +1460,7 @@ static void setup_for_endstop_move() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("run_z_probe > current_position", current_position);
}
#endif
@ -1476,7 +1476,7 @@ static void setup_for_endstop_move() {
float oldFeedRate = feedrate;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("do_blocking_move_to", x, y, z);
}
#endif
@ -1529,7 +1529,7 @@ static void setup_for_endstop_move() {
static void clean_up_after_endstop_move() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("clean_up_after_endstop_move > ENDSTOPS_ONLY_FOR_HOMING > endstops_not_homing()");
}
#endif
@ -1544,7 +1544,7 @@ static void setup_for_endstop_move() {
static void deploy_z_probe() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("deploy_z_probe > current_position", current_position);
}
#endif
@ -1639,7 +1639,7 @@ static void setup_for_endstop_move() {
static void stow_z_probe(bool doRaise = true) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("stow_z_probe > current_position", current_position);
}
#endif
@ -1654,7 +1654,7 @@ static void setup_for_endstop_move() {
#if Z_RAISE_AFTER_PROBING > 0
if (doRaise) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Raise Z (after) by ", (float)Z_RAISE_AFTER_PROBING);
SERIAL_EOL;
SERIAL_ECHO("> SERVO_ENDSTOPS > raise_z_after_probing()");
@ -1749,7 +1749,7 @@ static void setup_for_endstop_move() {
// Probe bed height at position (x,y), returns the measured z value
static float probe_pt(float x, float y, float z_before, ProbeAction probe_action = ProbeDeployAndStow, int verbose_level = 1) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("probe_pt >>>");
SERIAL_ECHOPAIR("> ProbeAction:", (unsigned long)probe_action);
SERIAL_EOL;
@ -1758,7 +1758,7 @@ static void setup_for_endstop_move() {
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Z Raise to z_before ", z_before);
SERIAL_EOL;
SERIAL_ECHOPAIR("> do_blocking_move_to_z ", z_before);
@ -1770,7 +1770,7 @@ static void setup_for_endstop_move() {
do_blocking_move_to_z(z_before); // this also updates current_position
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> do_blocking_move_to_xy ", x - (X_PROBE_OFFSET_FROM_EXTRUDER));
SERIAL_ECHOPAIR(", ", y - (Y_PROBE_OFFSET_FROM_EXTRUDER));
SERIAL_EOL;
@ -1783,7 +1783,7 @@ static void setup_for_endstop_move() {
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeDeploy) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> ProbeDeploy");
}
#endif
@ -1797,7 +1797,7 @@ static void setup_for_endstop_move() {
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeStow) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> ProbeStow (stow_z_probe will do Z Raise)");
}
#endif
@ -1816,7 +1816,7 @@ static void setup_for_endstop_move() {
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< probe_pt");
}
#endif
@ -1883,7 +1883,7 @@ static void setup_for_endstop_move() {
*/
void reset_bed_level() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("reset_bed_level");
}
#endif
@ -1932,7 +1932,7 @@ static void axis_unhomed_error() {
*/
static void dock_sled(bool dock, int offset = 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("dock_sled", dock);
SERIAL_EOL;
}
@ -1977,7 +1977,7 @@ static void axis_unhomed_error() {
static void homeaxis(AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> homeaxis(", (unsigned long)axis);
SERIAL_CHAR(')');
SERIAL_EOL;
@ -2036,7 +2036,7 @@ static void homeaxis(AxisEnum axis) {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
#endif
@ -2048,7 +2048,7 @@ static void homeaxis(AxisEnum axis) {
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
#endif
@ -2063,7 +2063,7 @@ static void homeaxis(AxisEnum axis) {
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> TRIGGER ENDSTOP > current_position", current_position);
}
#endif
@ -2097,7 +2097,7 @@ static void homeaxis(AxisEnum axis) {
// retrace by the amount specified in endstop_adj
if (endstop_adj[axis] * axis_home_dir < 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(false)");
}
#endif
@ -2105,7 +2105,7 @@ static void homeaxis(AxisEnum axis) {
sync_plan_position();
destination[axis] = endstop_adj[axis];
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> endstop_adj = ", endstop_adj[axis]);
print_xyz(" > destination", destination);
}
@ -2113,7 +2113,7 @@ static void homeaxis(AxisEnum axis) {
line_to_destination();
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> enable_endstops(true)");
}
#endif
@ -2121,7 +2121,7 @@ static void homeaxis(AxisEnum axis) {
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
else {
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> endstop_adj * axis_home_dir = ", endstop_adj[axis] * axis_home_dir);
SERIAL_EOL;
}
@ -2134,7 +2134,7 @@ static void homeaxis(AxisEnum axis) {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> AFTER set_axis_is_at_home > current_position", current_position);
}
#endif
@ -2156,7 +2156,7 @@ static void homeaxis(AxisEnum axis) {
if (axis == Z_AXIS) {
if (axis_home_dir < 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> SERVO_LEVELING > stow_z_probe");
}
#endif
@ -2172,7 +2172,7 @@ static void homeaxis(AxisEnum axis) {
// Retract Servo endstop if enabled
if (servo_endstop_id[axis] >= 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> SERVO_ENDSTOPS > Stow with servo.move()");
}
#endif
@ -2185,7 +2185,7 @@ static void homeaxis(AxisEnum axis) {
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("<<< homeaxis(", (unsigned long)axis);
SERIAL_CHAR(')');
SERIAL_EOL;
@ -2424,7 +2424,7 @@ inline void gcode_G4() {
inline void gcode_G28() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("gcode_G28 >>>");
}
#endif
@ -2487,7 +2487,7 @@ inline void gcode_G28() {
sync_plan_position_delta();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("(DELTA) > current_position", current_position);
}
#endif
@ -2505,7 +2505,7 @@ inline void gcode_G28() {
if (home_all_axis || homeZ) {
HOMEAXIS(Z);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> HOMEAXIS(Z) > current_position", current_position);
}
#endif
@ -2518,7 +2518,7 @@ inline void gcode_G28() {
destination[Z_AXIS] = MIN_Z_HEIGHT_FOR_HOMING;
feedrate = max_feedrate[Z_AXIS] * 60; // feedrate (mm/m) = max_feedrate (mm/s)
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Raise Z (before homing) to ", (float)(MIN_Z_HEIGHT_FOR_HOMING));
SERIAL_EOL;
print_xyz("> (home_all_axis || homeZ) > current_position", current_position);
@ -2566,7 +2566,7 @@ inline void gcode_G28() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> QUICK_HOME > current_position 1", current_position);
}
#endif
@ -2585,7 +2585,7 @@ inline void gcode_G28() {
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> QUICK_HOME > current_position 2", current_position);
}
#endif
@ -2616,7 +2616,7 @@ inline void gcode_G28() {
HOMEAXIS(X);
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> homeX", current_position);
}
#endif
@ -2627,7 +2627,7 @@ inline void gcode_G28() {
if (home_all_axis || homeY) {
HOMEAXIS(Y);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> homeY", current_position);
}
#endif
@ -2642,7 +2642,7 @@ inline void gcode_G28() {
#if ENABLED(Z_SAFE_HOMING)
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> Z_SAFE_HOMING >>>");
}
#endif
@ -2667,7 +2667,7 @@ inline void gcode_G28() {
feedrate = XY_TRAVEL_SPEED;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> Z_SAFE_HOMING > home_all_axis > current_position", current_position);
print_xyz("> Z_SAFE_HOMING > home_all_axis > destination", destination);
}
@ -2720,7 +2720,7 @@ inline void gcode_G28() {
} // !home_all_axes && homeZ
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< Z_SAFE_HOMING");
}
#endif
@ -2732,7 +2732,7 @@ inline void gcode_G28() {
#endif // !Z_SAFE_HOMING
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> (home_all_axis || homeZ) > final", current_position);
}
#endif
@ -2751,7 +2751,7 @@ inline void gcode_G28() {
#if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("ENDSTOPS_ONLY_FOR_HOMING enable_endstops(false)");
}
#endif
@ -2770,7 +2770,7 @@ inline void gcode_G28() {
line_to_destination();
st_synchronize();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("mbl_was_active > current_position", current_position);
}
#endif
@ -2783,7 +2783,7 @@ inline void gcode_G28() {
endstops_hit_on_purpose(); // clear endstop hit flags
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< gcode_G28");
}
#endif
@ -2993,7 +2993,7 @@ inline void gcode_G28() {
inline void gcode_G29() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("gcode_G29 >>>");
}
#endif
@ -3160,7 +3160,7 @@ inline void gcode_G28() {
if (probePointCounter) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("z_before = (between) ", (float)(Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS]));
SERIAL_EOL;
}
@ -3168,7 +3168,7 @@ inline void gcode_G28() {
}
else {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("z_before = (before) ", (float)Z_RAISE_BEFORE_PROBING);
SERIAL_EOL;
}
@ -3213,7 +3213,7 @@ inline void gcode_G28() {
} //yProbe
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> probing complete > current_position", current_position);
}
#endif
@ -3319,7 +3319,7 @@ inline void gcode_G28() {
#else // !AUTO_BED_LEVELING_GRID
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("> 3-point Leveling");
}
#endif
@ -3363,7 +3363,7 @@ inline void gcode_G28() {
real_z = st_get_axis_position_mm(Z_AXIS); //get the real Z (since plan_get_position is now correcting the plane)
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > z_tmp = ", z_tmp);
SERIAL_EOL;
SERIAL_ECHOPAIR("> BEFORE apply_rotation_xyz > real_z = ", real_z);
@ -3397,7 +3397,7 @@ inline void gcode_G28() {
* here, it could be seen as a compensating factor for the Z probe.
*/
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> AFTER apply_rotation_xyz > z_tmp = ", z_tmp);
SERIAL_EOL;
}
@ -3412,7 +3412,7 @@ inline void gcode_G28() {
sync_plan_position();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
print_xyz("> corrected Z in G29", current_position);
}
#endif
@ -3432,7 +3432,7 @@ inline void gcode_G28() {
#ifdef Z_PROBE_END_SCRIPT
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHO("Z Probe End Script: ");
SERIAL_ECHOLNPGM(Z_PROBE_END_SCRIPT);
}
@ -3447,7 +3447,7 @@ inline void gcode_G28() {
KEEPALIVE_STATE(IN_HANDLER);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< gcode_G29");
}
#endif
@ -4084,7 +4084,7 @@ inline void gcode_M42() {
*/
inline void gcode_M104() {
if (setTargetedHotend(104)) return;
if (marlin_debug_flags & DEBUG_DRYRUN) return;
if (DEBUGGING(DRYRUN)) return;
if (code_seen('S')) {
float temp = code_value();
@ -4224,7 +4224,7 @@ inline void gcode_M109() {
print_job_start();
if (setTargetedHotend(109)) return;
if (marlin_debug_flags & DEBUG_DRYRUN) return;
if (DEBUGGING(DRYRUN)) return;
no_wait_for_cooling = code_seen('S');
if (no_wait_for_cooling || code_seen('R')) {
@ -4308,7 +4308,7 @@ inline void gcode_M109() {
* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
*/
inline void gcode_M190() {
if (marlin_debug_flags & DEBUG_DRYRUN) return;
if (DEBUGGING(DRYRUN)) return;
LCD_MESSAGEPGM(MSG_BED_HEATING);
bool no_wait_for_cooling = code_seen('S');
@ -4416,7 +4416,7 @@ inline void gcode_M112() { kill(PSTR(MSG_KILLED)); }
* M140: Set bed temperature
*/
inline void gcode_M140() {
if (marlin_debug_flags & DEBUG_DRYRUN) return;
if (DEBUGGING(DRYRUN)) return;
if (code_seen('S')) setTargetBed(code_value());
}
@ -4900,7 +4900,7 @@ inline void gcode_M206() {
*/
inline void gcode_M666() {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM(">>> gcode_M666");
}
#endif
@ -4908,7 +4908,7 @@ inline void gcode_M206() {
if (code_seen(axis_codes[i])) {
endstop_adj[i] = code_value();
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPGM("endstop_adj[");
SERIAL_ECHO(axis_codes[i]);
SERIAL_ECHOPAIR("] = ", endstop_adj[i]);
@ -4918,7 +4918,7 @@ inline void gcode_M206() {
}
}
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOLNPGM("<<< gcode_M666");
}
#endif
@ -6081,7 +6081,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
void process_next_command() {
current_command = command_queue[cmd_queue_index_r];
if ((marlin_debug_flags & DEBUG_ECHO)) {
if (DEBUGGING(ECHO)) {
SERIAL_ECHO_START;
SERIAL_ECHOLN(current_command);
}
@ -6709,7 +6709,7 @@ void clamp_to_software_endstops(float target[3]) {
if (zprobe_zoffset < 0) negative_z_offset += zprobe_zoffset;
if (home_offset[Z_AXIS] < 0) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (marlin_debug_flags & DEBUG_LEVELING) {
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("> clamp_to_software_endstops > Add home_offset[Z_AXIS]:", home_offset[Z_AXIS]);
SERIAL_EOL;
}
@ -6889,7 +6889,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
inline void prevent_dangerous_extrude(float& curr_e, float& dest_e) {
if (marlin_debug_flags & DEBUG_DRYRUN) return;
if (DEBUGGING(DRYRUN)) return;
float de = dest_e - curr_e;
if (de) {
if (degHotend(active_extruder) < extrude_min_temp) {

2
Marlin/planner.cpp
Unescape View File

@ -591,7 +591,7 @@ float junction_deviation = 0.1;
dz = target[Z_AXIS] - position[Z_AXIS];
// DRYRUN ignores all temperature constraints and assures that the extruder is instantly satisfied
if (marlin_debug_flags & DEBUG_DRYRUN)
if (DEBUGGING(DRYRUN))
position[E_AXIS] = target[E_AXIS];
long de = target[E_AXIS] - position[E_AXIS];

Write Preview
Loading…
Cancel
Save