Mention that segments interpolate more

Marlin/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -909,7 +909,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1008,7 +1008,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -896,7 +896,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -880,7 +880,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -890,7 +890,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -880,7 +880,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Cartesio/Configuration.h

@@ -888,7 +888,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -899,7 +899,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Felix/Configuration.h

@@ -871,7 +871,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -871,7 +871,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -892,7 +892,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -904,7 +904,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -893,7 +893,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -917,7 +917,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -893,7 +893,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -893,7 +893,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -887,7 +887,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -901,7 +901,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -920,7 +920,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -945,7 +945,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -919,7 +919,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h

@@ -899,7 +899,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -889,7 +889,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1019,7 +1019,8 @@
   //#define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1019,7 +1019,8 @@
   //#define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1010,7 +1010,8 @@
 
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1013,7 +1013,8 @@
 
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1013,7 +1013,8 @@
 
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1022,7 +1022,8 @@
 
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -903,7 +903,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/makibox/Configuration.h

@@ -892,7 +892,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -884,7 +884,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
 

Marlin/example_configurations/wt150/Configuration.h

@@ -894,7 +894,8 @@
   #define ENABLE_LEVELING_FADE_HEIGHT
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
-  // split up moves into short segments like a Delta.
+  // split up moves into short segments like a Delta. This follows the
+  // contours of the bed more closely than edge-to-edge straight moves.
   #define SEGMENT_LEVELED_MOVES
   #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)