Add "SINGLENOZZLE" extruder option

Marlin/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/Felix/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 2
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/Hephestos/Configuration.h

@@ -123,6 +123,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/K8200/Configuration.h

@@ -127,6 +127,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1  // Single extruder. Set to 2 for dual extruders
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/SCARA/Configuration.h

@@ -145,6 +145,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/TAZ4/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/WITBOX/Configuration.h

@@ -123,6 +123,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 2
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -126,6 +126,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -113,6 +113,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/makibox/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -120,6 +120,9 @@
 // :[1,2,3,4]
 #define EXTRUDERS 1
 
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
 // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
 // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
 // For the other hotends it is their distance from the extruder 0 hotend.