Add NANODLP_ALL_AXIS to config examples

master
Scott Lahteine 7 years ago
parent 59265034ae
commit 9a4af6bd7c

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1562,5 +1562,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1560,5 +1560,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1526,5 +1526,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1570,5 +1570,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1566,5 +1566,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1561,5 +1561,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1560,5 +1560,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1559,5 +1559,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

@ -1549,5 +1549,9 @@
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

Loading…
Cancel
Save