forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Apply ENABLED / DISABLED to Marlin core files (PR#2558)

Browse Source
master
Scott Lahteine 9 years ago committed by Richard Wackerbarth
parent c0d7ea3e7e
commit b4abb0ae7f
3 changed files with 235 additions and 235 deletions
Show Stats Download Patch File Download Diff File

36
Marlin/Marlin.h
Unescape View File

@ -51,7 +51,7 @@ typedef unsigned long millis_t;
#include "WString.h"
#ifdef USBCON
#ifdef BTENABLED
#if ENABLED(BTENABLED)
#define MYSERIAL bt
#else
#define MYSERIAL Serial
@ -110,7 +110,7 @@ void idle(); // the standard idle routine calls manage_inactivity(false)
void manage_inactivity(bool ignore_stepper_queue=false);
#if defined(DUAL_X_CARRIAGE) && HAS_X_ENABLE && HAS_X2_ENABLE
#if ENABLED(DUAL_X_CARRIAGE) && HAS_X_ENABLE && HAS_X2_ENABLE
#define enable_x() do { X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); } while (0)
#define disable_x() do { X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; } while (0)
#elif HAS_X_ENABLE
@ -122,7 +122,7 @@ void manage_inactivity(bool ignore_stepper_queue=false);
#endif
#if HAS_Y_ENABLE
#ifdef Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#define enable_y() { Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }
#define disable_y() { Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
#else
@ -135,7 +135,7 @@ void manage_inactivity(bool ignore_stepper_queue=false);
#endif
#if HAS_Z_ENABLE
#ifdef Z_DUAL_STEPPER_DRIVERS
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define enable_z() { Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }
#define disable_z() { Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
#else
@ -205,7 +205,7 @@ void prepare_move();
void kill(const char *);
void Stop();
#ifdef FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void filrunout();
#endif
@ -234,7 +234,7 @@ void clamp_to_software_endstops(float target[3]);
extern millis_t previous_cmd_ms;
inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
#ifdef FAST_PWM_FAN
#if ENABLED(FAST_PWM_FAN)
void setPwmFrequency(uint8_t pin, int val);
#endif
@ -255,49 +255,49 @@ extern float min_pos[3]; // axis[n].min_pos
extern float max_pos[3]; // axis[n].max_pos
extern bool axis_known_position[3]; // axis[n].is_known
#if defined(DELTA) || defined(SCARA)
#if ENABLED(DELTA) || ENABLED(SCARA)
void calculate_delta(float cartesian[3]);
#ifdef DELTA
#if ENABLED(DELTA)
extern float delta[3];
extern float endstop_adj[3]; // axis[n].endstop_adj
extern float delta_radius;
extern float delta_diagonal_rod;
extern float delta_segments_per_second;
void recalc_delta_settings(float radius, float diagonal_rod);
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
extern int delta_grid_spacing[2];
void adjust_delta(float cartesian[3]);
#endif
#elif defined(SCARA)
#elif ENABLED(SCARA)
extern float axis_scaling[3]; // Build size scaling
void calculate_SCARA_forward_Transform(float f_scara[3]);
#endif
#endif
#ifdef Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
extern float z_endstop_adj;
#endif
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
extern float zprobe_zoffset;
#endif
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
extern float extrude_min_temp;
#endif
extern int fanSpeed;
#ifdef BARICUDA
#if ENABLED(BARICUDA)
extern int ValvePressure;
extern int EtoPPressure;
#endif
#ifdef FAN_SOFT_PWM
#if ENABLED(FAN_SOFT_PWM)
extern unsigned char fanSpeedSoftPwm;
#endif
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
extern float filament_width_nominal; //holds the theoretical filament diameter ie., 3.00 or 1.75
extern bool filament_sensor; //indicates that filament sensor readings should control extrusion
extern float filament_width_meas; //holds the filament diameter as accurately measured
@ -307,7 +307,7 @@ extern int fanSpeed;
extern int meas_delay_cm; //delay distance
#endif
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
extern bool autoretract_enabled;
extern bool retracted[EXTRUDERS]; // extruder[n].retracted
extern float retract_length, retract_length_swap, retract_feedrate, retract_zlift;
@ -320,7 +320,7 @@ extern millis_t print_job_stop_ms;
// Handling multiple extruders pins
extern uint8_t active_extruder;
#ifdef DIGIPOT_I2C
#if ENABLED(DIGIPOT_I2C)
extern void digipot_i2c_set_current( int channel, float current );
extern void digipot_i2c_init();
#endif

14
Marlin/Marlin.ino
Unescape View File

@ -33,14 +33,14 @@
#include "Configuration.h"
#include "pins.h"
#ifdef ULTRA_LCD
#if defined(LCD_I2C_TYPE_PCF8575)
#if ENABLED(ULTRA_LCD)
#if ENABLED(LCD_I2C_TYPE_PCF8575)
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
#elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#elif defined(DOGLCD)
#elif ENABLED(DOGLCD)
#include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
#else
#include <LiquidCrystal.h> // library for character LCD
@ -51,16 +51,16 @@
#include <SPI.h>
#endif
#if defined(DIGIPOT_I2C)
#if ENABLED(DIGIPOT_I2C)
#include <Wire.h>
#endif
#ifdef HAVE_TMCDRIVER
#if ENABLED(HAVE_TMCDRIVER)
#include <SPI.h>
#include <TMC26XStepper.h>
#endif
#ifdef HAVE_L6470DRIVER
#if ENABLED(HAVE_L6470DRIVER)
#include <SPI.h>
#include <L6470.h>
#endif

418
Marlin/Marlin_main.cpp
Unescape View File

@ -29,14 +29,14 @@
#include "Marlin.h"
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
#include "vector_3.h"
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
#include "qr_solve.h"
#endif
#endif // ENABLE_AUTO_BED_LEVELING
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
#include "mesh_bed_leveling.h"
#endif
@ -52,12 +52,12 @@
#include "math.h"
#include "buzzer.h"
#ifdef BLINKM
#if ENABLED(BLINKM)
#include "blinkm.h"
#include "Wire.h"
#endif
#if NUM_SERVOS > 0
#if HAS_SERVOS
#include "servo.h"
#endif
@ -226,11 +226,11 @@
*
*/
#ifdef M100_FREE_MEMORY_WATCHER
#if ENABLED(M100_FREE_MEMORY_WATCHER)
void gcode_M100();
#endif
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
CardReader card;
#endif
@ -288,12 +288,12 @@ static uint8_t target_extruder;
bool no_wait_for_cooling = true;
bool target_direction;
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
int xy_travel_speed = XY_TRAVEL_SPEED;
float zprobe_zoffset = Z_PROBE_OFFSET_FROM_EXTRUDER;
#endif
#if defined(Z_DUAL_ENDSTOPS) && !defined(DELTA)
#if ENABLED(Z_DUAL_ENDSTOPS) && DISABLED(DELTA)
float z_endstop_adj = 0;
#endif
@ -308,7 +308,7 @@ bool target_direction;
float extruder_offset[][EXTRUDERS] = {
EXTRUDER_OFFSET_X,
EXTRUDER_OFFSET_Y
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
, { 0 } // supports offsets in XYZ plane
#endif
};
@ -319,12 +319,12 @@ bool target_direction;
const int servo_endstop_angle[][2] = SERVO_ENDSTOP_ANGLES;
#endif
#ifdef BARICUDA
#if ENABLED(BARICUDA)
int ValvePressure = 0;
int EtoPPressure = 0;
#endif
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
bool autoretract_enabled = false;
bool retracted[EXTRUDERS] = { false };
@ -340,9 +340,9 @@ bool target_direction;
#endif // FWRETRACT
#if defined(ULTIPANEL) && HAS_POWER_SWITCH
#if ENABLED(ULTIPANEL) && HAS_POWER_SWITCH
bool powersupply =
#ifdef PS_DEFAULT_OFF
#if ENABLED(PS_DEFAULT_OFF)
false
#else
true
@ -350,7 +350,7 @@ bool target_direction;
;
#endif
#ifdef DELTA
#if ENABLED(DELTA)
float delta[3] = { 0 };
#define SIN_60 0.8660254037844386
#define COS_60 0.5
@ -366,7 +366,7 @@ bool target_direction;
float delta_diagonal_rod = DELTA_DIAGONAL_ROD;
float delta_diagonal_rod_2 = sq(delta_diagonal_rod);
float delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
int delta_grid_spacing[2] = { 0, 0 };
float bed_level[AUTO_BED_LEVELING_GRID_POINTS][AUTO_BED_LEVELING_GRID_POINTS];
#endif
@ -374,13 +374,13 @@ bool target_direction;
static bool home_all_axis = true;
#endif
#ifdef SCARA
#if ENABLED(SCARA)
float delta_segments_per_second = SCARA_SEGMENTS_PER_SECOND;
static float delta[3] = { 0 };
float axis_scaling[3] = { 1, 1, 1 }; // Build size scaling, default to 1
#endif
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
//Variables for Filament Sensor input
float filament_width_nominal = DEFAULT_NOMINAL_FILAMENT_DIA; //Set nominal filament width, can be changed with M404
bool filament_sensor = false; //M405 turns on filament_sensor control, M406 turns it off
@ -392,15 +392,15 @@ bool target_direction;
int meas_delay_cm = MEASUREMENT_DELAY_CM; //distance delay setting
#endif
#ifdef FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
static bool filrunoutEnqueued = false;
#endif
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
static bool fromsd[BUFSIZE];
#endif
#if NUM_SERVOS > 0
#if HAS_SERVOS
Servo servo[NUM_SERVOS];
#endif
@ -425,11 +425,11 @@ void serial_echopair_P(const char *s_P, float v) { serialprintPGM(s_P);
void serial_echopair_P(const char *s_P, double v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
void serial_echopair_P(const char *s_P, unsigned long v) { serialprintPGM(s_P); SERIAL_ECHO(v); }
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
float extrude_min_temp = EXTRUDE_MINTEMP;
#endif
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
#include "SdFatUtil.h"
int freeMemory() { return SdFatUtil::FreeRam(); }
#else
@ -519,7 +519,7 @@ void setup_killpin() {
void setup_filrunoutpin() {
#if HAS_FILRUNOUT
pinMode(FILRUNOUT_PIN, INPUT);
#ifdef ENDSTOPPULLUP_FIL_RUNOUT
#if ENABLED(ENDSTOPPULLUP_FIL_RUNOUT)
WRITE(FILRUNOUT_PIN, HIGH);
#endif
#endif
@ -545,7 +545,7 @@ void setup_powerhold() {
OUT_WRITE(SUICIDE_PIN, HIGH);
#endif
#if HAS_POWER_SWITCH
#ifdef PS_DEFAULT_OFF
#if ENABLED(PS_DEFAULT_OFF)
OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
#else
OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE);
@ -658,7 +658,7 @@ void setup() {
SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES);
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
for (int8_t i = 0; i < BUFSIZE; i++) fromsd[i] = false;
#endif
@ -683,11 +683,11 @@ void setup() {
enableStepperDrivers();
#endif
#ifdef DIGIPOT_I2C
#if ENABLED(DIGIPOT_I2C)
digipot_i2c_init();
#endif
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
pinMode(SLED_PIN, OUTPUT);
digitalWrite(SLED_PIN, LOW); // turn it off
#endif // Z_PROBE_SLED
@ -718,13 +718,13 @@ void setup() {
void loop() {
if (commands_in_queue < BUFSIZE - 1) get_command();
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
card.checkautostart(false);
#endif
if (commands_in_queue) {
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
if (card.saving) {
char *command = command_queue[cmd_queue_index_r];
@ -777,7 +777,7 @@ void get_command() {
if (drain_queued_commands_P()) return; // priority is given to non-serial commands
#ifdef NO_TIMEOUTS
#if ENABLED(NO_TIMEOUTS)
static millis_t last_command_time = 0;
millis_t ms = millis();
@ -792,7 +792,7 @@ void get_command() {
//
while (commands_in_queue < BUFSIZE && MYSERIAL.available() > 0) {
#ifdef NO_TIMEOUTS
#if ENABLED(NO_TIMEOUTS)
last_command_time = ms;
#endif
@ -812,7 +812,7 @@ void get_command() {
command[serial_count] = 0; // terminate string
// this item in the queue is not from sd
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
fromsd[cmd_queue_index_w] = false;
#endif
@ -896,7 +896,7 @@ void get_command() {
}
}
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
if (!card.sdprinting || serial_count) return;
@ -1001,7 +1001,7 @@ XYZ_CONSTS_FROM_CONFIG(float, max_length, MAX_LENGTH);
XYZ_CONSTS_FROM_CONFIG(float, home_bump_mm, HOME_BUMP_MM);
XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
#define DXC_FULL_CONTROL_MODE 0
#define DXC_AUTO_PARK_MODE 1
@ -1036,7 +1036,7 @@ XYZ_CONSTS_FROM_CONFIG(signed char, home_dir, HOME_DIR);
static void set_axis_is_at_home(AxisEnum axis) {
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (axis == X_AXIS) {
if (active_extruder != 0) {
current_position[X_AXIS] = x_home_pos(active_extruder);
@ -1054,7 +1054,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
}
#endif
#ifdef SCARA
#if ENABLED(SCARA)
if (axis == X_AXIS || axis == Y_AXIS) {
@ -1096,7 +1096,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
min_pos[axis] = base_min_pos(axis) + home_offset[axis];
max_pos[axis] = base_max_pos(axis) + home_offset[axis];
#if defined(ENABLE_AUTO_BED_LEVELING) && Z_HOME_DIR < 0
#if ENABLED(ENABLE_AUTO_BED_LEVELING) && Z_HOME_DIR < 0
if (axis == Z_AXIS) current_position[Z_AXIS] -= zprobe_zoffset;
#endif
}
@ -1130,7 +1130,7 @@ inline void line_to_destination() {
inline void sync_plan_position() {
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
}
#if defined(DELTA) || defined(SCARA)
#if ENABLED(DELTA) || ENABLED(SCARA)
inline void sync_plan_position_delta() {
calculate_delta(current_position);
plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
@ -1147,9 +1147,9 @@ static void setup_for_endstop_move() {
enable_endstops(true);
}
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
#ifdef DELTA
#if ENABLED(DELTA)
/**
* Calculate delta, start a line, and set current_position to destination
*/
@ -1161,9 +1161,9 @@ static void setup_for_endstop_move() {
}
#endif
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
#ifndef DELTA
#if DISABLED(DELTA)
static void set_bed_level_equation_lsq(double *plane_equation_coefficients) {
vector_3 planeNormal = vector_3(-plane_equation_coefficients[0], -plane_equation_coefficients[1], 1);
@ -1217,7 +1217,7 @@ static void setup_for_endstop_move() {
static void run_z_probe() {
#ifdef DELTA
#if ENABLED(DELTA)
float start_z = current_position[Z_AXIS];
long start_steps = st_get_position(Z_AXIS);
@ -1277,7 +1277,7 @@ static void setup_for_endstop_move() {
static void do_blocking_move_to(float x, float y, float z) {
float oldFeedRate = feedrate;
#ifdef DELTA
#if ENABLED(DELTA)
feedrate = XY_TRAVEL_SPEED;
@ -1312,7 +1312,7 @@ static void setup_for_endstop_move() {
inline void do_blocking_move_to_z(float z) { do_blocking_move_to(current_position[X_AXIS], current_position[Y_AXIS], z); }
static void clean_up_after_endstop_move() {
#ifdef ENDSTOPS_ONLY_FOR_HOMING
#if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
enable_endstops(false);
#endif
feedrate = saved_feedrate;
@ -1327,11 +1327,11 @@ static void setup_for_endstop_move() {
// Engage Z Servo endstop if enabled
if (servo_endstop_id[Z_AXIS] >= 0) servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][0]);
#elif defined(Z_PROBE_ALLEN_KEY)
#elif ENABLED(Z_PROBE_ALLEN_KEY)
feedrate = Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE;
// If endstop is already false, the probe is deployed
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
bool z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING);
if (z_probe_endstop)
#else
@ -1390,7 +1390,7 @@ static void setup_for_endstop_move() {
st_synchronize();
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING);
if (z_probe_endstop)
#else
@ -1428,7 +1428,7 @@ static void setup_for_endstop_move() {
servo[servo_endstop_id[Z_AXIS]].move(servo_endstop_angle[Z_AXIS][1]);
}
#elif defined(Z_PROBE_ALLEN_KEY)
#elif ENABLED(Z_PROBE_ALLEN_KEY)
// Move up for safety
feedrate = Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE;
@ -1478,7 +1478,7 @@ static void setup_for_endstop_move() {
st_synchronize();
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
bool z_probe_endstop = (READ(Z_PROBE_PIN) != Z_PROBE_ENDSTOP_INVERTING);
if (!z_probe_endstop)
#else
@ -1511,14 +1511,14 @@ static void setup_for_endstop_move() {
do_blocking_move_to_z(z_before); // this also updates current_position
do_blocking_move_to_xy(x - X_PROBE_OFFSET_FROM_EXTRUDER, y - Y_PROBE_OFFSET_FROM_EXTRUDER); // this also updates current_position
#if !defined(Z_PROBE_SLED) && !defined(Z_PROBE_ALLEN_KEY)
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeDeploy) deploy_z_probe();
#endif
run_z_probe();
float measured_z = current_position[Z_AXIS];
#if !defined(Z_PROBE_SLED) && !defined(Z_PROBE_ALLEN_KEY)
#if DISABLED(Z_PROBE_SLED) && DISABLED(Z_PROBE_ALLEN_KEY)
if (probe_action & ProbeStow) stow_z_probe();
#endif
@ -1534,7 +1534,7 @@ static void setup_for_endstop_move() {
return measured_z;
}
#ifdef DELTA
#if ENABLED(DELTA)
/**
* All DELTA leveling in the Marlin uses NONLINEAR_BED_LEVELING
@ -1598,7 +1598,7 @@ static void setup_for_endstop_move() {
#endif // ENABLE_AUTO_BED_LEVELING
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
#ifndef SLED_DOCKING_OFFSET
#define SLED_DOCKING_OFFSET 0
@ -1651,7 +1651,7 @@ static void homeaxis(AxisEnum axis) {
if (axis == X_AXIS ? HOMEAXIS_DO(X) : axis == Y_AXIS ? HOMEAXIS_DO(Y) : axis == Z_AXIS ? HOMEAXIS_DO(Z) : 0) {
int axis_home_dir =
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
(axis == X_AXIS) ? x_home_dir(active_extruder) :
#endif
home_dir(axis);
@ -1660,14 +1660,14 @@ static void homeaxis(AxisEnum axis) {
current_position[axis] = 0;
sync_plan_position();
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
// Get Probe
if (axis == Z_AXIS) {
if (axis_home_dir < 0) dock_sled(false);
}
#endif
#if SERVO_LEVELING && !defined(Z_PROBE_SLED)
#if SERVO_LEVELING && DISABLED(Z_PROBE_SLED)
// Deploy a probe if there is one, and homing towards the bed
if (axis == Z_AXIS) {
@ -1683,7 +1683,7 @@ static void homeaxis(AxisEnum axis) {
#endif
// Set a flag for Z motor locking
#ifdef Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
if (axis == Z_AXIS) In_Homing_Process(true);
#endif
@ -1714,7 +1714,7 @@ static void homeaxis(AxisEnum axis) {
line_to_destination();
st_synchronize();
#ifdef Z_DUAL_ENDSTOPS
#if ENABLED(Z_DUAL_ENDSTOPS)
if (axis == Z_AXIS) {
float adj = fabs(z_endstop_adj);
bool lockZ1;
@ -1739,7 +1739,7 @@ static void homeaxis(AxisEnum axis) {
} // Z_AXIS
#endif
#ifdef DELTA
#if ENABLED(DELTA)
// retrace by the amount specified in endstop_adj
if (endstop_adj[axis] * axis_home_dir < 0) {
enable_endstops(false); // Disable endstops while moving away
@ -1760,14 +1760,14 @@ static void homeaxis(AxisEnum axis) {
endstops_hit_on_purpose(); // clear endstop hit flags
axis_known_position[axis] = true;
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
// bring probe back
if (axis == Z_AXIS) {
if (axis_home_dir < 0) dock_sled(true);
}
#endif
#if SERVO_LEVELING && !defined(Z_PROBE_SLED)
#if SERVO_LEVELING && DISABLED(Z_PROBE_SLED)
// Deploy a probe if there is one, and homing towards the bed
if (axis == Z_AXIS) {
@ -1788,7 +1788,7 @@ static void homeaxis(AxisEnum axis) {
}
}
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
void retract(bool retracting, bool swapping=false) {
@ -1807,7 +1807,7 @@ static void homeaxis(AxisEnum axis) {
if (retract_zlift > 0.01) {
current_position[Z_AXIS] -= retract_zlift;
#ifdef DELTA
#if ENABLED(DELTA)
sync_plan_position_delta();
#else
sync_plan_position();
@ -1819,7 +1819,7 @@ static void homeaxis(AxisEnum axis) {
if (retract_zlift > 0.01) {
current_position[Z_AXIS] += retract_zlift;
#ifdef DELTA
#if ENABLED(DELTA)
sync_plan_position_delta();
#else
sync_plan_position();
@ -1881,7 +1881,7 @@ inline void gcode_G0_G1() {
if (IsRunning()) {
gcode_get_destination(); // For X Y Z E F
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
if (autoretract_enabled && !(code_seen('X') || code_seen('Y') || code_seen('Z')) && code_seen('E')) {
float echange = destination[E_AXIS] - current_position[E_AXIS];
@ -1907,14 +1907,14 @@ inline void gcode_G0_G1() {
inline void gcode_G2_G3(bool clockwise) {
if (IsRunning()) {
#ifdef SF_ARC_FIX
#if ENABLED(SF_ARC_FIX)
bool relative_mode_backup = relative_mode;
relative_mode = true;
#endif
gcode_get_destination();
#ifdef SF_ARC_FIX
#if ENABLED(SF_ARC_FIX)
relative_mode = relative_mode_backup;
#endif
@ -1949,7 +1949,7 @@ inline void gcode_G4() {
while (millis() < codenum) idle();
}
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
/**
* G10 - Retract filament according to settings of M207
@ -1991,15 +1991,15 @@ inline void gcode_G28() {
st_synchronize();
// For auto bed leveling, clear the level matrix
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
plan_bed_level_matrix.set_to_identity();
#ifdef DELTA
#if ENABLED(DELTA)
reset_bed_level();
#endif
#endif
// For manual bed leveling deactivate the matrix temporarily
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
uint8_t mbl_was_active = mbl.active;
mbl.active = 0;
#endif
@ -2010,7 +2010,7 @@ inline void gcode_G28() {
feedrate = 0.0;
#ifdef DELTA
#if ENABLED(DELTA)
// A delta can only safely home all axis at the same time
// all axis have to home at the same time
@ -2049,7 +2049,7 @@ inline void gcode_G28() {
HOMEAXIS(Z);
#elif !defined(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0
#elif DISABLED(Z_SAFE_HOMING) && defined(Z_RAISE_BEFORE_HOMING) && Z_RAISE_BEFORE_HOMING > 0
// Raise Z before homing any other axes
// (Does this need to be "negative home direction?" Why not just use Z_RAISE_BEFORE_HOMING?)
@ -2062,13 +2062,13 @@ inline void gcode_G28() {
} // home_all_axis || homeZ
#ifdef QUICK_HOME
#if ENABLED(QUICK_HOME)
if (home_all_axis || (homeX && homeY)) { // First diagonal move
current_position[X_AXIS] = current_position[Y_AXIS] = 0;
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
int x_axis_home_dir = x_home_dir(active_extruder);
extruder_duplication_enabled = false;
#else
@ -2099,21 +2099,21 @@ inline void gcode_G28() {
current_position[X_AXIS] = destination[X_AXIS];
current_position[Y_AXIS] = destination[Y_AXIS];
#ifndef SCARA
#if DISABLED(SCARA)
current_position[Z_AXIS] = destination[Z_AXIS];
#endif
}
#endif // QUICK_HOME
#ifdef HOME_Y_BEFORE_X
#if ENABLED(HOME_Y_BEFORE_X)
// Home Y
if (home_all_axis || homeY) HOMEAXIS(Y);
#endif
// Home X
if (home_all_axis || homeX) {
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
int tmp_extruder = active_extruder;
extruder_duplication_enabled = false;
active_extruder = !active_extruder;
@ -2130,7 +2130,7 @@ inline void gcode_G28() {
#endif
}
#ifndef HOME_Y_BEFORE_X
#if DISABLED(HOME_Y_BEFORE_X)
// Home Y
if (home_all_axis || homeY) HOMEAXIS(Y);
#endif
@ -2140,7 +2140,7 @@ inline void gcode_G28() {
if (home_all_axis || homeZ) {
#ifdef Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
if (home_all_axis) {
@ -2222,16 +2222,16 @@ inline void gcode_G28() {
#endif // else DELTA
#ifdef SCARA
#if ENABLED(SCARA)
sync_plan_position_delta();
#endif
#ifdef ENDSTOPS_ONLY_FOR_HOMING
#if ENABLED(ENDSTOPS_ONLY_FOR_HOMING)
enable_endstops(false);
#endif
// For manual leveling move back to 0,0
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
if (mbl_was_active) {
current_position[X_AXIS] = mbl.get_x(0);
current_position[Y_AXIS] = mbl.get_y(0);
@ -2251,7 +2251,7 @@ inline void gcode_G28() {
endstops_hit_on_purpose(); // clear endstop hit flags
}
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
enum MeshLevelingState { MeshReport, MeshStart, MeshNext, MeshSet };
@ -2386,7 +2386,7 @@ inline void gcode_G28() {
} // switch(state)
}
#elif defined(ENABLE_AUTO_BED_LEVELING)
#elif ENABLED(ENABLE_AUTO_BED_LEVELING)
void out_of_range_error(const char *p_edge) {
SERIAL_PROTOCOLPGM("?Probe ");
@ -2451,9 +2451,9 @@ inline void gcode_G28() {
bool dryrun = code_seen('D'),
deploy_probe_for_each_reading = code_seen('E');
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
#ifndef DELTA
#if DISABLED(DELTA)
bool do_topography_map = verbose_level > 2 || code_seen('T');
#endif
@ -2463,7 +2463,7 @@ inline void gcode_G28() {
}
int auto_bed_leveling_grid_points = AUTO_BED_LEVELING_GRID_POINTS;
#ifndef DELTA
#if DISABLED(DELTA)
if (code_seen('P')) auto_bed_leveling_grid_points = code_value_short();
if (auto_bed_leveling_grid_points < 2) {
SERIAL_PROTOCOLPGM("?Number of probed (P)oints is implausible (2 minimum).\n");
@ -2509,9 +2509,9 @@ inline void gcode_G28() {
#endif // AUTO_BED_LEVELING_GRID
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
dock_sled(false); // engage (un-dock) the probe
#elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
#elif ENABLED(Z_PROBE_ALLEN_KEY) //|| SERVO_LEVELING
deploy_z_probe();
#endif
@ -2521,7 +2521,7 @@ inline void gcode_G28() {
// make sure the bed_level_rotation_matrix is identity or the planner will get it wrong
plan_bed_level_matrix.set_to_identity();
#ifdef DELTA
#if ENABLED(DELTA)
reset_bed_level();
#else //!DELTA
//vector_3 corrected_position = plan_get_position_mm();
@ -2539,13 +2539,13 @@ inline void gcode_G28() {
feedrate = homing_feedrate[Z_AXIS];
#ifdef AUTO_BED_LEVELING_GRID
#if ENABLED(AUTO_BED_LEVELING_GRID)
// probe at the points of a lattice grid
const int xGridSpacing = (right_probe_bed_position - left_probe_bed_position) / (auto_bed_leveling_grid_points - 1),
yGridSpacing = (back_probe_bed_position - front_probe_bed_position) / (auto_bed_leveling_grid_points - 1);
#ifdef DELTA
#if ENABLED(DELTA)
delta_grid_spacing[0] = xGridSpacing;
delta_grid_spacing[1] = yGridSpacing;
float z_offset = zprobe_zoffset;
@ -2582,7 +2582,7 @@ inline void gcode_G28() {
xInc = -1;
}
#ifndef DELTA
#if DISABLED(DELTA)
// If do_topography_map is set then don't zig-zag. Just scan in one direction.
// This gets the probe points in more readable order.
if (!do_topography_map) zig = !zig;
@ -2597,7 +2597,7 @@ inline void gcode_G28() {
float measured_z,
z_before = probePointCounter ? Z_RAISE_BETWEEN_PROBINGS + current_position[Z_AXIS] : Z_RAISE_BEFORE_PROBING;
#ifdef DELTA
#if ENABLED(DELTA)
// Avoid probing the corners (outside the round or hexagon print surface) on a delta printer.
float distance_from_center = sqrt(xProbe*xProbe + yProbe*yProbe);
if (distance_from_center > DELTA_PROBABLE_RADIUS) continue;
@ -2615,7 +2615,7 @@ inline void gcode_G28() {
measured_z = probe_pt(xProbe, yProbe, z_before, act, verbose_level);
#ifndef DELTA
#if DISABLED(DELTA)
mean += measured_z;
eqnBVector[probePointCounter] = measured_z;
@ -2635,7 +2635,7 @@ inline void gcode_G28() {
clean_up_after_endstop_move();
#ifdef DELTA
#if ENABLED(DELTA)
if (!dryrun) extrapolate_unprobed_bed_level();
print_bed_level();
@ -2746,7 +2746,7 @@ inline void gcode_G28() {
#endif // !AUTO_BED_LEVELING_GRID
#ifndef DELTA
#if DISABLED(DELTA)
if (verbose_level > 0)
plan_bed_level_matrix.debug(" \n\nBed Level Correction Matrix:");
@ -2787,9 +2787,9 @@ inline void gcode_G28() {
}
#endif // !DELTA
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
dock_sled(true); // dock the probe
#elif defined(Z_PROBE_ALLEN_KEY) //|| defined(SERVO_LEVELING)
#elif ENABLED(Z_PROBE_ALLEN_KEY) //|| SERVO_LEVELING
stow_z_probe();
#endif
@ -2799,7 +2799,7 @@ inline void gcode_G28() {
#endif
}
#ifndef Z_PROBE_SLED
#if DISABLED(Z_PROBE_SLED)
inline void gcode_G30() {
deploy_z_probe(); // Engage Z Servo endstop if available
@ -2844,7 +2844,7 @@ inline void gcode_G92() {
}
}
if (didXYZ) {
#if defined(DELTA) || defined(SCARA)
#if ENABLED(DELTA) || ENABLED(SCARA)
sync_plan_position_delta();
#else
sync_plan_position();
@ -2852,7 +2852,7 @@ inline void gcode_G92() {
}
}
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
/**
* M0: // M0 - Unconditional stop - Wait for user button press on LCD
@ -2876,7 +2876,7 @@ inline void gcode_G92() {
lcd_setstatus(args, true);
else {
LCD_MESSAGEPGM(MSG_USERWAIT);
#if defined(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
dontExpireStatus();
#endif
}
@ -2909,7 +2909,7 @@ inline void gcode_M17() {
enable_all_steppers();
}
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
/**
* M20: List SD card to serial output
@ -3013,7 +3013,7 @@ inline void gcode_M31() {
autotempShutdown();
}
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
/**
* M32: Select file and start SD Print
@ -3042,7 +3042,7 @@ inline void gcode_M31() {
}
}
#ifdef LONG_FILENAME_HOST_SUPPORT
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
/**
* M33: Get the long full path of a file or folder
@ -3101,10 +3101,10 @@ inline void gcode_M42() {
} // code_seen('S')
}
#if defined(ENABLE_AUTO_BED_LEVELING) && defined(Z_PROBE_REPEATABILITY_TEST)
#if ENABLED(ENABLE_AUTO_BED_LEVELING) && ENABLED(Z_PROBE_REPEATABILITY_TEST)
// This is redundant since the SanityCheck.h already checks for a valid Z_PROBE_PIN, but here for clarity.
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
#if !HAS_Z_PROBE
#error You must define Z_PROBE_PIN to enable Z-Probe repeatability calculation.
#endif
@ -3363,7 +3363,7 @@ inline void gcode_M104() {
if (code_seen('S')) {
float temp = code_value();
setTargetHotend(temp, target_extruder);
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset);
#endif
@ -3376,9 +3376,9 @@ inline void gcode_M104() {
inline void gcode_M105() {
if (setTargetedHotend(105)) return;
#if HAS_TEMP_0 || HAS_TEMP_BED || defined(HEATER_0_USES_MAX6675)
#if HAS_TEMP_0 || HAS_TEMP_BED || ENABLED(HEATER_0_USES_MAX6675)
SERIAL_PROTOCOLPGM(MSG_OK);
#if HAS_TEMP_0 || defined(HEATER_0_USES_MAX6675)
#if HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675)
SERIAL_PROTOCOLPGM(" T:");
SERIAL_PROTOCOL_F(degHotend(target_extruder), 1);
SERIAL_PROTOCOLPGM(" /");
@ -3419,7 +3419,7 @@ inline void gcode_M105() {
SERIAL_PROTOCOL(getHeaterPower(-1));
#endif
#ifdef SHOW_TEMP_ADC_VALUES
#if ENABLED(SHOW_TEMP_ADC_VALUES)
#if HAS_TEMP_BED
SERIAL_PROTOCOLPGM(" ADC B:");
SERIAL_PROTOCOL_F(degBed(),1);
@ -3466,13 +3466,13 @@ inline void gcode_M109() {
if (no_wait_for_cooling || code_seen('R')) {
float temp = code_value();
setTargetHotend(temp, target_extruder);
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
setTargetHotend1(temp == 0.0 ? 0.0 : temp + duplicate_extruder_temp_offset);
#endif
}
#ifdef AUTOTEMP
#if ENABLED(AUTOTEMP)
autotemp_enabled = code_seen('F');
if (autotemp_enabled) autotemp_factor = code_value();
if (code_seen('S')) autotemp_min = code_value();
@ -3601,7 +3601,7 @@ inline void gcode_M111() {
*/
inline void gcode_M112() { kill(PSTR(MSG_KILLED)); }
#ifdef BARICUDA
#if ENABLED(BARICUDA)
#if HAS_HEATER_1
/**
@ -3635,7 +3635,7 @@ inline void gcode_M140() {
if (code_seen('S')) setTargetBed(code_value());
}
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
/**
* M145: Set the heatup state for a material in the LCD menu
@ -3706,7 +3706,7 @@ inline void gcode_M140() {
OUT_WRITE(SUICIDE_PIN, HIGH);
#endif
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
powersupply = true;
LCD_MESSAGEPGM(WELCOME_MSG);
lcd_update();
@ -3731,7 +3731,7 @@ inline void gcode_M81() {
#elif HAS_POWER_SWITCH
OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
#endif
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
#if HAS_POWER_SWITCH
powersupply = false;
#endif
@ -3833,7 +3833,7 @@ inline void gcode_M114() {
SERIAL_EOL;
#ifdef SCARA
#if ENABLED(SCARA)
SERIAL_PROTOCOLPGM("SCARA Theta:");
SERIAL_PROTOCOL(delta[X_AXIS]);
SERIAL_PROTOCOLPGM(" Psi+Theta:");
@ -3917,7 +3917,7 @@ inline void gcode_M120() { enable_endstops(true); }
*/
inline void gcode_M121() { enable_endstops(false); }
#ifdef BLINKM
#if ENABLED(BLINKM)
/**
* M150: Set Status LED Color - Use R-U-B for R-G-B
@ -4056,13 +4056,13 @@ inline void gcode_M206() {
home_offset[i] = code_value();
}
}
#ifdef SCARA
#if ENABLED(SCARA)
if (code_seen('T')) home_offset[X_AXIS] = code_value(); // Theta
if (code_seen('P')) home_offset[Y_AXIS] = code_value(); // Psi
#endif
}
#ifdef DELTA
#if ENABLED(DELTA)
/**
* M665: Set delta configurations
*
@ -4086,7 +4086,7 @@ inline void gcode_M206() {
}
}
}
#elif defined(Z_DUAL_ENDSTOPS) // !DELTA && defined(Z_DUAL_ENDSTOPS)
#elif ENABLED(Z_DUAL_ENDSTOPS) // !DELTA && ENABLED(Z_DUAL_ENDSTOPS)
/**
* M666: For Z Dual Endstop setup, set z axis offset to the z2 axis.
*/
@ -4096,9 +4096,9 @@ inline void gcode_M206() {
SERIAL_EOL;
}
#endif // !DELTA && defined(Z_DUAL_ENDSTOPS)
#endif // !DELTA && Z_DUAL_ENDSTOPS
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
/**
* M207: Set firmware retraction values
@ -4167,7 +4167,7 @@ inline void gcode_M206() {
if (code_seen('X')) extruder_offset[X_AXIS][target_extruder] = code_value();
if (code_seen('Y')) extruder_offset[Y_AXIS][target_extruder] = code_value();
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (code_seen('Z')) extruder_offset[Z_AXIS][target_extruder] = code_value();
#endif
@ -4178,7 +4178,7 @@ inline void gcode_M206() {
SERIAL_ECHO(extruder_offset[X_AXIS][e]);
SERIAL_CHAR(',');
SERIAL_ECHO(extruder_offset[Y_AXIS][e]);
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
SERIAL_CHAR(',');
SERIAL_ECHO(extruder_offset[Z_AXIS][e]);
#endif
@ -4257,7 +4257,7 @@ inline void gcode_M226() {
} // code_seen('P')
}
#if NUM_SERVOS > 0
#if HAS_SERVOS
/**
* M280: Get or set servo position. P<index> S<angle>
@ -4286,7 +4286,7 @@ inline void gcode_M226() {
}
}
#endif // NUM_SERVOS > 0
#endif // HAS_SERVOS
#if HAS_BUZZER
@ -4302,7 +4302,7 @@ inline void gcode_M226() {
#endif // HAS_BUZZER
#ifdef PIDTEMP
#if ENABLED(PIDTEMP)
/**
* M301: Set PID parameters P I D (and optionally C)
@ -4317,13 +4317,13 @@ inline void gcode_M226() {
if (code_seen('P')) PID_PARAM(Kp, e) = code_value();
if (code_seen('I')) PID_PARAM(Ki, e) = scalePID_i(code_value());
if (code_seen('D')) PID_PARAM(Kd, e) = scalePID_d(code_value());
#ifdef PID_ADD_EXTRUSION_RATE
#if ENABLED(PID_ADD_EXTRUSION_RATE)
if (code_seen('C')) PID_PARAM(Kc, e) = code_value();
#endif
updatePID();
SERIAL_PROTOCOL(MSG_OK);
#ifdef PID_PARAMS_PER_EXTRUDER
#if ENABLED(PID_PARAMS_PER_EXTRUDER)
SERIAL_PROTOCOL(" e:"); // specify extruder in serial output
SERIAL_PROTOCOL(e);
#endif // PID_PARAMS_PER_EXTRUDER
@ -4333,7 +4333,7 @@ inline void gcode_M226() {
SERIAL_PROTOCOL(unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_PROTOCOL(" d:");
SERIAL_PROTOCOL(unscalePID_d(PID_PARAM(Kd, e)));
#ifdef PID_ADD_EXTRUSION_RATE
#if ENABLED(PID_ADD_EXTRUSION_RATE)
SERIAL_PROTOCOL(" c:");
//Kc does not have scaling applied above, or in resetting defaults
SERIAL_PROTOCOL(PID_PARAM(Kc, e));
@ -4348,7 +4348,7 @@ inline void gcode_M226() {
#endif // PIDTEMP
#ifdef PIDTEMPBED
#if ENABLED(PIDTEMPBED)
inline void gcode_M304() {
if (code_seen('P')) bedKp = code_value();
@ -4404,7 +4404,7 @@ inline void gcode_M226() {
#endif // CHDK || PHOTOGRAPH_PIN
#ifdef HAS_LCD_CONTRAST
#if ENABLED(HAS_LCD_CONTRAST)
/**
* M250: Read and optionally set the LCD contrast
@ -4418,7 +4418,7 @@ inline void gcode_M226() {
#endif // HAS_LCD_CONTRAST
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
void set_extrude_min_temp(float temp) { extrude_min_temp = temp; }
@ -4444,7 +4444,7 @@ inline void gcode_M303() {
PID_autotune(temp, e, c);
}
#ifdef SCARA
#if ENABLED(SCARA)
bool SCARA_move_to_cal(uint8_t delta_x, uint8_t delta_y) {
//SoftEndsEnabled = false; // Ignore soft endstops during calibration
//SERIAL_ECHOLN(" Soft endstops disabled ");
@ -4515,7 +4515,7 @@ inline void gcode_M303() {
#endif // SCARA
#ifdef EXT_SOLENOID
#if ENABLED(EXT_SOLENOID)
void enable_solenoid(uint8_t num) {
switch(num) {
@ -4570,7 +4570,7 @@ inline void gcode_M303() {
*/
inline void gcode_M400() { st_synchronize(); }
#if defined(ENABLE_AUTO_BED_LEVELING) && !defined(Z_PROBE_SLED) && (HAS_SERVO_ENDSTOPS || defined(Z_PROBE_ALLEN_KEY))
#if ENABLED(ENABLE_AUTO_BED_LEVELING) && DISABLED(Z_PROBE_SLED) && (HAS_SERVO_ENDSTOPS || ENABLED(Z_PROBE_ALLEN_KEY))
#if HAS_SERVO_ENDSTOPS
void raise_z_for_servo() {
@ -4602,7 +4602,7 @@ inline void gcode_M400() { st_synchronize(); }
#endif // ENABLE_AUTO_BED_LEVELING && (HAS_SERVO_ENDSTOPS || Z_PROBE_ALLEN_KEY) && !Z_PROBE_SLED
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
/**
* M404: Display or set the nominal filament width (3mm, 1.75mm ) W<3.0>
@ -4667,7 +4667,7 @@ inline void gcode_M400() { st_synchronize(); }
inline void gcode_M410() { quickStop(); }
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
/**
* M420: Enable/Disable Mesh Bed Leveling
@ -4777,7 +4777,7 @@ inline void gcode_M503() {
Config_PrintSettings(code_seen('S') && code_value() == 0);
}
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
/**
* M540: Set whether SD card print should abort on endstop hit (M540 S<0|1>)
@ -4820,7 +4820,7 @@ inline void gcode_M503() {
#endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
#ifdef FILAMENTCHANGEENABLE
#if ENABLED(FILAMENTCHANGEENABLE)
/**
* M600: Pause for filament change
@ -4847,7 +4847,7 @@ inline void gcode_M503() {
for (int i=0; i<NUM_AXIS; i++)
lastpos[i] = destination[i] = current_position[i];
#ifdef DELTA
#if ENABLED(DELTA)
#define RUNPLAN calculate_delta(destination); \
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], fr60, active_extruder);
#else
@ -4937,7 +4937,7 @@ inline void gcode_M503() {
lcd_reset_alert_level();
#ifdef DELTA
#if ENABLED(DELTA)
// Move XYZ to starting position, then E
calculate_delta(lastpos);
plan_buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], destination[E_AXIS], fr60, active_extruder);
@ -4953,7 +4953,7 @@ inline void gcode_M503() {
line_to_destination();
#endif
#ifdef FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
filrunoutEnqueued = false;
#endif
@ -4961,7 +4961,7 @@ inline void gcode_M503() {
#endif // FILAMENTCHANGEENABLE
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
/**
* M605: Set dual x-carriage movement mode
@ -5026,7 +5026,7 @@ inline void gcode_M907() {
#ifdef MOTOR_CURRENT_PWM_E_PIN
if (code_seen('E')) digipot_current(2, code_value());
#endif
#ifdef DIGIPOT_I2C
#if ENABLED(DIGIPOT_I2C)
// this one uses actual amps in floating point
for (int i=0;i<NUM_AXIS;i++) if(code_seen(axis_codes[i])) digipot_i2c_set_current(i, code_value());
// for each additional extruder (named B,C,D,E..., channels 4,5,6,7...)
@ -5120,7 +5120,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
if (tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset
set_destination_to_current();
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (dual_x_carriage_mode == DXC_AUTO_PARK_MODE && IsRunning() &&
(delayed_move_time != 0 || current_position[X_AXIS] != x_home_pos(active_extruder))) {
// Park old head: 1) raise 2) move to park position 3) lower
@ -5173,7 +5173,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
// Set the new active extruder and position
active_extruder = tmp_extruder;
#endif // !DUAL_X_CARRIAGE
#ifdef DELTA
#if ENABLED(DELTA)
sync_plan_position_delta();
#else
sync_plan_position();
@ -5182,7 +5182,7 @@ inline void gcode_T(uint8_t tmp_extruder) {
if (make_move && IsRunning()) prepare_move();
}
#ifdef EXT_SOLENOID
#if ENABLED(EXT_SOLENOID)
st_synchronize();
disable_all_solenoids();
enable_solenoid_on_active_extruder();
@ -5252,7 +5252,7 @@ void process_next_command() {
break;
// G2, G3
#ifndef SCARA
#if DISABLED(SCARA)
case 2: // G2 - CW ARC
case 3: // G3 - CCW ARC
gcode_G2_G3(codenum == 2);
@ -5264,7 +5264,7 @@ void process_next_command() {
gcode_G4();
break;
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
case 10: // G10: retract
case 11: // G11: retract_recover
@ -5277,15 +5277,15 @@ void process_next_command() {
gcode_G28();
break;
#if defined(ENABLE_AUTO_BED_LEVELING) || defined(MESH_BED_LEVELING)
#if ENABLED(ENABLE_AUTO_BED_LEVELING) || ENABLED(MESH_BED_LEVELING)
case 29: // G29 Detailed Z-Probe, probes the bed at 3 or more points.
gcode_G29();
break;
#endif
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
#ifndef Z_PROBE_SLED
#if DISABLED(Z_PROBE_SLED)
case 30: // G30 Single Z Probe
gcode_G30();
@ -5316,7 +5316,7 @@ void process_next_command() {
break;
case 'M': switch (codenum) {
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
case 0: // M0 - Unconditional stop - Wait for user button press on LCD
case 1: // M1 - Conditional stop - Wait for user button press on LCD
gcode_M0_M1();
@ -5327,7 +5327,7 @@ void process_next_command() {
gcode_M17();
break;
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
case 20: // M20 - list SD card
gcode_M20(); break;
@ -5354,7 +5354,7 @@ void process_next_command() {
case 32: //M32 - Select file and start SD print
gcode_M32(); break;
#ifdef LONG_FILENAME_HOST_SUPPORT
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
case 33: //M33 - Get the long full path to a file or folder
gcode_M33(); break;
#endif // LONG_FILENAME_HOST_SUPPORT
@ -5372,7 +5372,7 @@ void process_next_command() {
gcode_M42();
break;
#if defined(ENABLE_AUTO_BED_LEVELING) && defined(Z_PROBE_REPEATABILITY_TEST)
#if ENABLED(ENABLE_AUTO_BED_LEVELING) && ENABLED(Z_PROBE_REPEATABILITY_TEST)
case 48: // M48 Z-Probe repeatability
gcode_M48();
break;
@ -5423,7 +5423,7 @@ void process_next_command() {
break;
#endif // HAS_FAN
#ifdef BARICUDA
#if ENABLED(BARICUDA)
// PWM for HEATER_1_PIN
#if HAS_HEATER_1
case 126: // M126: valve open
@ -5492,7 +5492,7 @@ void process_next_command() {
gcode_M119();
break;
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
case 145: // M145: Set material heatup parameters
gcode_M145();
@ -5500,7 +5500,7 @@ void process_next_command() {
#endif
#ifdef BLINKM
#if ENABLED(BLINKM)
case 150: // M150
gcode_M150();
@ -5532,19 +5532,19 @@ void process_next_command() {
gcode_M206();
break;
#ifdef DELTA
#if ENABLED(DELTA)
case 665: // M665 set delta configurations L<diagonal_rod> R<delta_radius> S<segments_per_sec>
gcode_M665();
break;
#endif
#if defined(DELTA) || defined(Z_DUAL_ENDSTOPS)
#if ENABLED(DELTA) || ENABLED(Z_DUAL_ENDSTOPS)
case 666: // M666 set delta / dual endstop adjustment
gcode_M666();
break;
#endif
#ifdef FWRETRACT
#if ENABLED(FWRETRACT)
case 207: //M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop]
gcode_M207();
break;
@ -5574,11 +5574,11 @@ void process_next_command() {
gcode_M226();
break;
#if NUM_SERVOS > 0
#if HAS_SERVOS
case 280: // M280 - set servo position absolute. P: servo index, S: angle or microseconds
gcode_M280();
break;
#endif // NUM_SERVOS > 0
#endif // HAS_SERVOS
#if HAS_BUZZER
case 300: // M300 - Play beep tone
@ -5586,13 +5586,13 @@ void process_next_command() {
break;
#endif // HAS_BUZZER
#ifdef PIDTEMP
#if ENABLED(PIDTEMP)
case 301: // M301
gcode_M301();
break;
#endif // PIDTEMP
#ifdef PIDTEMPBED
#if ENABLED(PIDTEMPBED)
case 304: // M304
gcode_M304();
break;
@ -5604,13 +5604,13 @@ void process_next_command() {
break;
#endif // CHDK || PHOTOGRAPH_PIN
#ifdef HAS_LCD_CONTRAST
#if ENABLED(HAS_LCD_CONTRAST)
case 250: // M250 Set LCD contrast value: C<value> (value 0..63)
gcode_M250();
break;
#endif // HAS_LCD_CONTRAST
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
case 302: // allow cold extrudes, or set the minimum extrude temperature
gcode_M302();
break;
@ -5620,7 +5620,7 @@ void process_next_command() {
gcode_M303();
break;
#ifdef SCARA
#if ENABLED(SCARA)
case 360: // M360 SCARA Theta pos1
if (gcode_M360()) return;
break;
@ -5645,7 +5645,7 @@ void process_next_command() {
gcode_M400();
break;
#if defined(ENABLE_AUTO_BED_LEVELING) && (HAS_SERVO_ENDSTOPS || defined(Z_PROBE_ALLEN_KEY)) && !defined(Z_PROBE_SLED)
#if ENABLED(ENABLE_AUTO_BED_LEVELING) && (HAS_SERVO_ENDSTOPS || ENABLED(Z_PROBE_ALLEN_KEY)) && DISABLED(Z_PROBE_SLED)
case 401:
gcode_M401();
break;
@ -5654,7 +5654,7 @@ void process_next_command() {
break;
#endif // ENABLE_AUTO_BED_LEVELING && (HAS_SERVO_ENDSTOPS || Z_PROBE_ALLEN_KEY) && !Z_PROBE_SLED
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width
gcode_M404();
break;
@ -5673,7 +5673,7 @@ void process_next_command() {
gcode_M410();
break;
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
case 420: // M420 Enable/Disable Mesh Bed Leveling
gcode_M420();
break;
@ -5699,7 +5699,7 @@ void process_next_command() {
gcode_M503();
break;
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
case 540:
gcode_M540();
break;
@ -5711,13 +5711,13 @@ void process_next_command() {
break;
#endif // CUSTOM_M_CODE_SET_Z_PROBE_OFFSET
#ifdef FILAMENTCHANGEENABLE
#if ENABLED(FILAMENTCHANGEENABLE)
case 600: //Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
gcode_M600();
break;
#endif // FILAMENTCHANGEENABLE
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
case 605:
gcode_M605();
break;
@ -5776,11 +5776,11 @@ void FlushSerialRequestResend() {
void ok_to_send() {
refresh_cmd_timeout();
#ifdef SDSUPPORT
#if ENABLED(SDSUPPORT)
if (fromsd[cmd_queue_index_r]) return;
#endif
SERIAL_PROTOCOLPGM(MSG_OK);
#ifdef ADVANCED_OK
#if ENABLED(ADVANCED_OK)
SERIAL_PROTOCOLPGM(" N"); SERIAL_PROTOCOL(gcode_LastN);
SERIAL_PROTOCOLPGM(" P"); SERIAL_PROTOCOL(int(BLOCK_BUFFER_SIZE - movesplanned() - 1));
SERIAL_PROTOCOLPGM(" B"); SERIAL_PROTOCOL(BUFSIZE - commands_in_queue);
@ -5794,7 +5794,7 @@ void clamp_to_software_endstops(float target[3]) {
NOLESS(target[Y_AXIS], min_pos[Y_AXIS]);
float negative_z_offset = 0;
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
if (zprobe_zoffset < 0) negative_z_offset += zprobe_zoffset;
if (home_offset[Z_AXIS] < 0) negative_z_offset += home_offset[Z_AXIS];
#endif
@ -5808,7 +5808,7 @@ void clamp_to_software_endstops(float target[3]) {
}
}
#ifdef DELTA
#if ENABLED(DELTA)
void recalc_delta_settings(float radius, float diagonal_rod) {
delta_tower1_x = -SIN_60 * radius; // front left tower
@ -5844,7 +5844,7 @@ void clamp_to_software_endstops(float target[3]) {
*/
}
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
// Adjust print surface height by linear interpolation over the bed_level array.
void adjust_delta(float cartesian[3]) {
@ -5888,7 +5888,7 @@ void clamp_to_software_endstops(float target[3]) {
#endif // DELTA
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
// This function is used to split lines on mesh borders so each segment is only part of one mesh area
void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_rate, const uint8_t &extruder, uint8_t x_splits=0xff, uint8_t y_splits=0xff)
@ -5955,7 +5955,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
}
#endif // MESH_BED_LEVELING
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
inline void prevent_dangerous_extrude(float &curr_e, float &dest_e) {
if (marlin_debug_flags & DEBUG_DRYRUN) return;
@ -5966,7 +5966,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
#ifdef PREVENT_LENGTHY_EXTRUDE
#if ENABLED(PREVENT_LENGTHY_EXTRUDE)
if (labs(de) > EXTRUDE_MAXLENGTH) {
curr_e = dest_e; // Behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
@ -5978,7 +5978,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
#endif // PREVENT_DANGEROUS_EXTRUDE
#if defined(DELTA) || defined(SCARA)
#if ENABLED(DELTA) || ENABLED(SCARA)
inline bool prepare_move_delta(float target[NUM_AXIS]) {
float difference[NUM_AXIS];
@ -6003,7 +6003,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
calculate_delta(target);
#ifdef ENABLE_AUTO_BED_LEVELING
#if ENABLED(ENABLE_AUTO_BED_LEVELING)
adjust_delta(target);
#endif
@ -6021,11 +6021,11 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
#endif // DELTA || SCARA
#ifdef SCARA
#if ENABLED(SCARA)
inline bool prepare_move_scara(float target[NUM_AXIS]) { return prepare_move_delta(target); }
#endif
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
inline bool prepare_move_dual_x_carriage() {
if (active_extruder_parked) {
@ -6064,7 +6064,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
#endif // DUAL_X_CARRIAGE
#if !defined(DELTA) && !defined(SCARA)
#if DISABLED(DELTA) && DISABLED(SCARA)
inline bool prepare_move_cartesian() {
// Do not use feedrate_multiplier for E or Z only moves
@ -6072,7 +6072,7 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
line_to_destination();
}
else {
#ifdef MESH_BED_LEVELING
#if ENABLED(MESH_BED_LEVELING)
mesh_plan_buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], (feedrate/60)*(feedrate_multiplier/100.0), active_extruder);
return false;
#else
@ -6094,21 +6094,21 @@ void prepare_move() {
clamp_to_software_endstops(destination);
refresh_cmd_timeout();
#ifdef PREVENT_DANGEROUS_EXTRUDE
#if ENABLED(PREVENT_DANGEROUS_EXTRUDE)
prevent_dangerous_extrude(current_position[E_AXIS], destination[E_AXIS]);
#endif
#ifdef SCARA
#if ENABLED(SCARA)
if (!prepare_move_scara(destination)) return;
#elif defined(DELTA)
#elif ENABLED(DELTA)
if (!prepare_move_delta(destination)) return;
#endif
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
if (!prepare_move_dual_x_carriage()) return;
#endif
#if !defined(DELTA) && !defined(SCARA)
#if DISABLED(DELTA) && DISABLED(SCARA)
if (!prepare_move_cartesian()) return;
#endif
@ -6291,7 +6291,7 @@ void plan_arc(
#endif // HAS_CONTROLLERFAN
#ifdef SCARA
#if ENABLED(SCARA)
void calculate_SCARA_forward_Transform(float f_scara[3]) {
// Perform forward kinematics, and place results in delta[3]
@ -6370,7 +6370,7 @@ void plan_arc(
#endif // SCARA
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
static bool red_led = false;
static millis_t next_status_led_update_ms = 0;
@ -6514,7 +6514,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
controllerFan(); // Check if fan should be turned on to cool stepper drivers down
#endif
#ifdef EXTRUDER_RUNOUT_PREVENT
#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
if (ms > previous_cmd_ms + EXTRUDER_RUNOUT_SECONDS * 1000)
if (degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP) {
bool oldstatus;
@ -6574,7 +6574,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
}
#endif
#ifdef DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
// handle delayed move timeout
if (delayed_move_time && ms > delayed_move_time + 1000 && IsRunning()) {
// travel moves have been received so enact them
@ -6584,7 +6584,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
}
#endif
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
handle_status_leds();
#endif
@ -6592,7 +6592,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
}
void kill(const char *lcd_msg) {
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
lcd_setalertstatuspgm(lcd_msg);
#endif
@ -6615,7 +6615,7 @@ void kill(const char *lcd_msg) {
while(1) { /* Intentionally left empty */ } // Wait for reset
}
#ifdef FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
void filrunout() {
if (!filrunoutEnqueued) {
@ -6627,7 +6627,7 @@ void kill(const char *lcd_msg) {
#endif // FILAMENT_RUNOUT_SENSOR
#ifdef FAST_PWM_FAN
#if ENABLED(FAST_PWM_FAN)
void setPwmFrequency(uint8_t pin, int val) {
val &= 0x07;

Write Preview
Loading…
Cancel
Save