forksand
/
marlin-lulzbot-laser
1
1
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update TinyBoy2 configurations

Browse Source
master
Scott Lahteine 9 years ago
parent 1855534f20
commit e5b16081cb
2 changed files with 40 additions and 9 deletions
Show Stats Download Patch File Download Diff File

19
Marlin/example_configurations/TinyBoy2/Configuration.h
Unescape View File

@ -974,7 +974,7 @@
#define UBL_PROBE_PT_2_Y 20 #define UBL_PROBE_PT_2_Y 20
#define UBL_PROBE_PT_3_X 180 #define UBL_PROBE_PT_3_X 180
#define UBL_PROBE_PT_3_Y 20 #define UBL_PROBE_PT_3_Y 20
#define UBL_G26_MESH_EDITING // Enable G26 mesh editing //#define UBL_G26_MESH_EDITING // Enable G26 mesh editing
#elif ENABLED(MESH_BED_LEVELING) #elif ENABLED(MESH_BED_LEVELING)
@ -990,6 +990,17 @@
#endif // BED_LEVELING #endif // BED_LEVELING
/**
* Use the LCD controller for bed leveling
* Requires MESH_BED_LEVELING or PROBE_MANUALLY
*/
//#define LCD_BED_LEVELING
#if ENABLED(LCD_BED_LEVELING)
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
#define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
#endif
/** /**
* Commands to execute at the end of G29 probing. * Commands to execute at the end of G29 probing.
* Useful to retract or move the Z probe out of the way. * Useful to retract or move the Z probe out of the way.
@ -1537,13 +1548,13 @@
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
// be used to mitigate the associated resolution loss. If enabled, // be used to mitigate the associated resolution loss. If enabled,
// some of the PWM cycles are stretched so on average the wanted // some of the PWM cycles are stretched so on average the desired
// duty cycle is attained. // duty cycle is attained.
//#define SOFT_PWM_DITHER //#define SOFT_PWM_DITHER
// Temperature status LEDs that display the hotend and bed temperature. // Temperature status LEDs that display the hotend and bed temperature.
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on. // If all hotends, bed temperature, and target temperature are under 54C
// Otherwise the RED led is on. There is 1C hysteresis. // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
//#define TEMP_STAT_LEDS //#define TEMP_STAT_LEDS
// M240 Triggers a camera by emulating a Canon RC-1 Remote // M240 Triggers a camera by emulating a Canon RC-1 Remote

30
Marlin/example_configurations/TinyBoy2/Configuration_adv.h
Unescape View File

@ -286,6 +286,7 @@
#if ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z2_USE_ENDSTOP _XMAX_ #define Z2_USE_ENDSTOP _XMAX_
#define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 // use M666 command to determine/test this value
#endif #endif
#endif // Z_DUAL_STEPPER_DRIVERS #endif // Z_DUAL_STEPPER_DRIVERS
@ -394,18 +395,36 @@
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards) /**
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) * @section stepper motor current
*
// Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current) * Some boards have a means of setting the stepper motor current via firmware.
*
* The power on motor currents are set by:
* PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
* known compatible chips: A4982
* DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
* known compatible chips: AD5206
* DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
* known compatible chips: MCP4728
* DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE
* known compatible chips: MCP4451, MCP4018
*
* Motor currents can also be set by M907 - M910 and by the LCD.
* M907 - applies to all.
* M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
*/
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps //#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
//#define DIGIPOT_I2C //#define DIGIPOT_I2C
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8 // Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
#define DIGIPOT_I2C_NUM_CHANNELS 8 #define DIGIPOT_I2C_NUM_CHANNELS 8
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} #define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
//=========================================================================== //===========================================================================
//=============================Additional Features=========================== //=============================Additional Features===========================
@ -648,6 +667,7 @@
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target // G38.2 and G38.3 Probe Target
// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)

Write Preview
Loading…
Cancel
Save