9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
12 years ago
e358a2d7af
Added fix for SF Arc Point fillet procedure
12 years ago
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
12 years ago
6b45e9f167
Add Duty Cycling to the Heater Bed
12 years ago
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
12 years ago
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
12 years ago
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
12 years ago
0c123950e9
__ header file replace
12 years ago
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
12 years ago
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
12 years ago
fbd282b3ba
Update Marlin/Configuration.h
12 years ago
c4490f5f3d
Update Marlin/Configuration.h
12 years ago
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
12 years ago
de2ca3b2e8
Grammar correction.
12 years ago
c2fc466e1b
Update Marlin/Configuration.h
12 years ago
9f9f498491
Update Marlin/Configuration.h
12 years ago
602c8ee02b
Melzi support
12 years ago
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
12 years ago
1874cb71a6
Added option to increase the FAN PWM frequency.
12 years ago
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
12 years ago
464b755918
added support for the UltiController
12 years ago
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
12 years ago
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
12 years ago
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
12 years ago
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
12 years ago
910f4e77a2
Added 20MHz support.
12 years ago
e056bf8081
Added E-Jerk
12 years ago
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
12 years ago
97d42ca2b2
SDSUPPORT default disabled
12 years ago
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
12 years ago
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
12 years ago
35e57bf149
Added gen6 deluxe.
12 years ago
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
12 years ago
01d28c18ab
Fixed casting warning in sanguino
12 years ago
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
12 years ago
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
12 years ago
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
12 years ago
8816ef1c64
Small fixes after merge
12 years ago
d298dd121f
merged SBUBA82 and Justblair
12 years ago
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
12 years ago
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
12 years ago
e661578c84
support for GEN7 1.1,1.2 and 1.3
12 years ago
73344e69c1
Added temperature offset/gain settings for AD595.
12 years ago
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
12 years ago
0e3631ff4b
smaller changes
12 years ago
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
12 years ago
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
12 years ago
9173a5713b
Teensylu support.
12 years ago
bdb70c0509
Warning for 10k thermistor
12 years ago
Mark Finn