0c06e97e98
Split up languages.h, use ISO codes
...
Breaking up languages.h makes it easier to translate. Using language
codes makes it easier to select a language and sets the naming standard.
10 years ago
3ebfd29312
Print a message when printing is aborted
...
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
10 years ago
433ac29d31
Updated a bit of spanish language
10 years ago
c40c7b589b
Merge pull request #1095 from thinkyhead/codeclean
...
Simple code cleanup. Rename "homeing" to homing.
10 years ago
2f6c57eadc
Proposed feature: Set Home Offsets
...
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
10 years ago
f989bd5435
Simple code cleanup. Rename "homeing" to homing.
10 years ago
1e9dc85148
Do not use translations for the serial console messages
...
The serial protocol has to stay machine readable, without having
to cope with a ton of different human language variants. So
just leave it at the original english version.
Should fix ErikZalm/Marlin#1052
10 years ago
3c927901a4
Implementation of FW extruder change retract
...
FW retraction is extended onto swap retraction invoked by 'G10 S1'.
Bookkeeping of the retract state of all extruders allows for having one
extruder fw standard retracted while another extruder is swap retracted.
An LCD menu item for the swap retract and recover length was added.
10 years ago
1cbcbb0971
Add makibox machine information
10 years ago
e5b70237c7
Added new language (Basque-Euskera)
...
Added:
* new language (Basque-Euskera)
* some minor corrections for Spanish
* added 2 new constants for every language (required for a minor change
I am preparing to ultralcd.cpp)
10 years ago
086ff1644f
Merge pull request #852 from pixatintes/patch-1
...
Update language.h
10 years ago
c23376f2e7
Merge pull request #837 from whosawhatsis/fwretract
...
FWRETRACT in mm/s
10 years ago
a3530d1141
Update language.h
...
Updated to latest version.
10 years ago
990e770e15
Update language.h
...
Added catalan language
10 years ago
c8cdd1fc6f
Bugfixes for language option 6 (russian)
10 years ago
7395dafc1e
semantic changes in language.h
10 years ago
fad2a60ce6
Corrections for preheat extension in language.h
10 years ago
944ced87c5
Extended Preheat options
...
Preheat LCD menus base on code by D-Base
10 years ago
3906f27c46
Individual extruder flow rate
...
Extension of M221, Tune menu
10 years ago
aab61e63c3
FWRETRACT in mm/s
...
Firmware retraction now stores the retract and recover speeds in mm/s
instead of mm/min. This makes it match the units of the maximum
feedrate, and fixes problems with modifying the value via LCD control
panel. From gcode, the values are still taken in mm/min to match the
units of G1 and similar, and they are converted to mm/s before they are
stored.
I also lowered the default retract feedrate to make it less likely to
cause problems for geared extruders when the user hasn’t bothered to
set a reasonable maximum feedrate, though users should be setting both
of these values to suit their hardware.
10 years ago
15d1b8d719
Fixed finnish translation
...
- Fixed Few finnish transalations
- Removed duplicate contrast define
10 years ago
ea669cb504
Fix some extra and some missing tabs, to make the file consistent.
10 years ago
b46a1b6360
Update the menu plan document with the current menu as per ultralcd.cpp.
10 years ago
498d76fd79
Fixed some messages where the text shown on the screen was more than 17 characters
10 years ago
cf5c3b6610
Added dutch to language.h
10 years ago
7dcd350941
A few changes to Russian, changed LCD strings to be <=17 characters.
10 years ago
9b7d87e885
Remove duplicate contrast define.
10 years ago
0b9ecf3824
Language cleanup, part 1.
10 years ago
5f797ca29f
Updated Polish, changed default firmware URL to Marlin.
10 years ago
0778f5f028
Add missing entries to the new Aragonian language.
10 years ago
54bab3e0d0
Merge branch 'Marlin_v1' into localisation
...
Conflicts:
Marlin/language.h
10 years ago
bdd0211aeb
Move strings in ultralcd.cpp into language.h.
10 years ago
c8e5a82d49
keep English as default lang.
10 years ago
f64592e362
Add Aragonese translation
10 years ago
36086d3ca4
Update language.h
...
Updated Polish translations.
10 years ago
d24df7af2c
M200 implementation
10 years ago
05932e4458
Add Z Probe Offset to EEPROM and Ultra LCD
11 years ago
df194f75e1
Added PT100 support for Ultiboard2
11 years ago
b33375d438
Z Axis Safe Homing when using Z Probe
...
Recommended for those who are using the Z Probe for Z Homing (as
Z-Endstop)
This feature has two changes:
1) Allow user to choose where the Z Probe will touch the bed when homing
all axis together (G28) by setting below defines:
Z_SAFE_HOMING_X_POINT
Z_SAFE_HOMING_Y_POINT
2) Prevents the user to perform Z Axis Homing when the Z Probe is
outsite bed.
11 years ago
48a185d004
Fixed compile errors from bad commits.
11 years ago
a5e8575829
Add UUID support to M115 responses.
11 years ago
eb23a68e92
Update French translation in language.h
11 years ago
44f327d738
Uniformly reindent language.h
11 years ago
326d2db025
Update language.h so that all languages compile
...
Some strings still need translation, but at least everything compiles.
11 years ago
2cb716f513
Run Marlin/language.h through dos2unix
11 years ago
34da3a0a3f
Merge github.com:ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/language.h
11 years ago
cdaaad3df1
Merge branch 'Marlin_v1' of https://github.com/makr3d/Marlin into makr3d-Marlin_v1
11 years ago
e509cdbeb0
added contrast control function for gLCDs
11 years ago
68be33b1fc
Update language.h
...
I update the spanish Messages, now this compile for spanish language.
11 years ago
2daa85918e
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
Marlin/language.h
Marlin/pins.h
Marlin/ultralcd.cpp
11 years ago
Scott Lahteine