8218558953
Update comments, rename next_ping_ms, followup to #3797
10 years ago
2207001333
No compromises for the manage_heater()
...
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
10 years ago
07c9a11c3c
Automatically set X2 stepper pins
10 years ago
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
10 years ago
9f6b8f7d5b
Remove extra @section directive from configs
10 years ago
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
10 years ago
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
10 years ago
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
10 years ago
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
10 years ago
868eebfdee
Simplify configuration of Z2 endstops
10 years ago
3b2d159abd
Relax the test for "Heating failed" errors
10 years ago
53cc6cca46
Formalize some dependencies on PIDTEMPBED
10 years ago
e08915a723
Fix comments in Configuration_adv.h
10 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
10 years ago
5e5d250832
Added gplv3 header to all Marlin files
10 years ago
3166aed087
Improve the descriptions for THERMAL_PROTECTION
10 years ago
e5fd43f343
Implement BABYSTEPPING for COREXY and COREXZ
10 years ago
236a44c83b
follow-up the PR #3131
...
follow-up the commit 7326d63ce0
10 years ago
0c48eaf3de
Expose motor current in more configs, disable by default
10 years ago
e8b10d2836
Adding PWM_MOTOR_CURRENT flag to help expose PWM_MOTOR_CURRENTS in Configuration_adv.h similar to DIGIPOT_MOTOR_CURRENT
10 years ago
eb85342fd9
Merge pull request #2989 from AnHardt/fix2661
...
Pre home display - Stepper release
10 years ago
772460a7b8
Various minor spelling corrections
...
Redo of #2939 rebased against RCBugFix
10 years ago
9eb4aceee4
Merge pull request #2986 from thinkyhead/enable_watchdog
...
Enable USE_WATCHDOG by default
10 years ago
4b02f33e69
Distribute config-changes to the other configurations
10 years ago
b6e69e71ce
Make stepper shutdown after inactivity dependent
...
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E
And make exemplaric Configuration.
Names can be discussed.
This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
10 years ago
1093c780c8
Remove obsolete STEPS_MM_E setting
10 years ago
fbfbc5e330
Enable USE_WATCHDOG by default
10 years ago
0cebe85e65
Clean up spacing and duplicate entries
...
• Removing trailing whitespace
• Adjusting indention for better readability
• Removing duplicated entries
10 years ago
c956b52c4a
Babystep Multiplier
...
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA
Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
10 years ago
e01f5e1ef7
Cleanup
10 years ago
bc50db9cf6
Implement PID_ADD_EXTRUSION_RATE
10 years ago
28599c51c7
Wrap Dual Y options in a conditional
10 years ago
11a065c0ca
Remove Z2 pins overrides from Configuration_adv.h
10 years ago
f3ab1dba54
Z babystepping for coreXY (PR#47)
...
only X and Y were not implemented
10 years ago
270c766de2
SDCARDDETECT -> SD_DETECT, added docs
...
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
10 years ago
37d1879386
Apply overridables to Configuration files
10 years ago
ab6f1fdf8b
Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
...
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
10 years ago
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
11 years ago
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
11 years ago
8d295547be
* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.
11 years ago
bc205c76a3
SDCARDDETECTINVERTED problems
...
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
11 years ago
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
11 years ago
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
11 years ago
258bcdefe0
move dogm font selection to configuration_adv.h
11 years ago
7750180c93
transpire -> expire
...
Minor wording correction.
11 years ago
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
11 years ago
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
11 years ago
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
11 years ago
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
11 years ago
429c6ccad2
Neaten config formatting
11 years ago
Scott Lahteine