14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
8 years ago
bb2114a060
Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
...
Add an option for delta to home to the top
8 years ago
38466b1d2f
Merge pull request #5271 from esenapaj/Fix-for-the-PR-#5267
...
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
8 years ago
9b96a4a53b
Merge pull request #5246 from thinkyhead/rc_some_cleanup
...
Minor stepper cleanup
8 years ago
da67037550
Fix for thePR #5267 (Introduce a +1234.56 format for over 999 steps/mm)
...
・Fix memory leak
8 years ago
0f891e848b
Merge pull request #5268 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
c91325e904
Merge pull request #5267 from esenapaj/Introduce-a-+1234.56-format
...
Introduce a +1234.56 format for over 999 steps/mm
8 years ago
190a04c467
Update Japanese translation
...
・Change translation for 16 width LCD
8 years ago
7b836a4000
Introduce a +1234.56 format for over 999 steps/mm
8 years ago
76f47aebb6
Travis test TMC2130 options
8 years ago
3e0376b45e
Reorder M114 and M119 gcode cases
8 years ago
644fac5d34
Reduce all stepper_indirection init code with macros
8 years ago
4e4f37b6c2
Code formatting for TMC and L6470 config options
8 years ago
127e21ae00
Extend M122 for all steppers
8 years ago
bf5f5f44cc
Make TMC2130 init code auto-configure
...
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
8 years ago
d67c1d825f
Add TMC2130 support
8 years ago
11effeee2c
Add an option for delta to home to the top
8 years ago
8bf07684d2
Merge pull request #5256 from AnHardt/e-interrupts-2
...
Endstop interrupt refinement
8 years ago
88b38eafd8
Endstop interrupt refinement
...
At the start of a move, check if the endstops are already triggered.
The 'change' interrupts will not see a change if already triggered.
8 years ago
79c8591192
Merge pull request #5253 from thinkyhead/rc_smooth_move_ex-lax
...
Ensure smooth print moves even with LCD enabled
8 years ago
0215cacb30
Merge pull request #5247 from esenapaj/Re-follow-the-PR-#4634
...
Re-follow the PR #4634 (Set language display charset in language.h)
8 years ago
2cc32d85a3
Adjust ENSURE_SMOOTH_MOVES coding style
8 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
8 years ago
de89dc9f04
Ensure smooth print moves even with LCD enabled
...
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.
This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
8 years ago
7b95918e84
Merge pull request #5251 from thinkyhead/rc_cmake_support
...
Added CMake support
8 years ago
87b6b19256
Patch CASE_LIGHT typo
8 years ago
0be6167f14
Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18
...
K8200: Example configuration back in sync
8 years ago
de3eea920d
Merge pull request #5252 from thinkyhead/rc_endstop_interrupt_followup
...
Endstop interrupts followup
8 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
8 years ago
7a99c6ce4f
Reformat temp sensor listing
8 years ago
181cdb3cfe
Move GCode list above include lines
8 years ago
25d0c167bd
More detailed static_assert messages
8 years ago
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
8 years ago
f579ec2e7a
Added CMake support
8 years ago
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
8 years ago
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
8 years ago
32247c1b80
Merge pull request #5244 from thinkyhead/rc_danish_nov_2016
...
Update to Danish language 10/11-2016
8 years ago
6eb6f12c64
Patch up some language formatting
8 years ago
8cffa60cc5
Update to Danish language 10/11-2016
8 years ago
98600e1433
Minor stepper cleanup
8 years ago
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
8 years ago
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
8 years ago
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
8 years ago
b278b7a395
Update Japanese translation
...
Only adjust spacing
8 years ago
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
8 years ago
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
8 years ago
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago
Scott Lahteine