182c8d7f8f
Dyze High Temp Thermistor Support
9 years ago
5832f4b848
Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
...
・Update forgotten example configuration files
9 years ago
e282d69f63
Print job timer comment changed
9 years ago
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
9 years ago
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
9 years ago
5126cce7fd
Move Allen Key probe move scripts to their own functions
...
There was an hidden extra move after the scripts. This is configurable now.
Added the extra moves to the relevant configs.
10 years ago
e77844594d
readme.md -> README.md
10 years ago
a0b00d29e3
Add a ported example configuration for the Velleman K8400 (Vertex) printer.
...
Supports both dual and single head printers (with the correct config).
Includes community sourced feed rate fix.
Rename / move files.
Remove redundant definitions.
10 years ago
95347fc650
Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)
...
・Update a forgotten Configuration_adv.h of Cartesio
10 years ago
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
10 years ago
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
10 years ago
f84d85f761
Cleanup extruder runout configs
10 years ago
683975cf90
Fix spelling in a config comment
10 years ago
593c8bf286
Support for Rigidbot V2
10 years ago
10da7ac86c
Combine Z raise before/after options
10 years ago
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
10 years ago
bd01592816
Goodbye MECHANICAL_PROBE
10 years ago
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
10 years ago
d50539583a
Make XY_PROBE_SPEED a general probe option
10 years ago
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
10 years ago
19fb04d761
Update bq Hephestos 2 config
10 years ago
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
10 years ago
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
10 years ago
d583ea852d
Standardize format description of Panel
10 years ago
aa6d35bd49
Move code block of probe to appropriate position
10 years ago
740fb2ce39
Adjust spacing
10 years ago
f77f3ffa70
Remove duplicated Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX
10 years ago
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
10 years ago
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
10 years ago
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
10 years ago
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
10 years ago
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
10 years ago
de12228758
Make Z Probe options independent of ABL
10 years ago
f8c278ce4d
Cartesio UI display option in all configs
10 years ago
d55b94d606
Follow-up the PR #4065 (Remove support for XY servo endstops)
...
・Update a forgotten Configuration.h of Cartesio
10 years ago
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
10 years ago
692a6e7c91
Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
...
Remove support for XY servo endstops
10 years ago
eab44b30d4
Safety and serial sections
10 years ago
fc56a547d1
Rename movement section to motion
10 years ago
1000563d80
Make M851 standard with a bed probe
10 years ago
47ce810f52
Remove support for XY servo endstops
10 years ago
c5eecb11b2
Follow-up the PR #4055 (Croatian language support)
...
・Update a forgotten Configuration.h of Cartesio
10 years ago
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
10 years ago
ebbed2975e
Delete mysterious .swp files from #3609
10 years ago
02e5dad29a
Include Croatian in language listings
10 years ago
106227540e
Follow-up and improvement the PR #4053 (CNControls Cartesio UI Support)
...
・Add implimantation of PR #3609 to configuration files of Cartesio
・Standardize macro names
10 years ago
b410bf933b
Merge pull request #4053 from thinkyhead/rc_cartesio_redo
...
CNControls Cartesio UI Support
10 years ago
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
10 years ago
4d2cb70152
Cartesio UI Support
10 years ago
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
10 years ago
Scott Lahteine