38110e220d
Segmented manual moves for kinematics
7 years ago
9239fcf0da
Allow UBL G29 and G26 to build without a probe
7 years ago
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
7 years ago
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
7 years ago
067622fcc6
Apply some tweaks based on 2.0.x
7 years ago
ae256576e1
Bring configs into parity with 2.0.x
7 years ago
a21201a713
LCD filename already concatentated
7 years ago
53f2f188f2
LCD filename already concatenated
7 years ago
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
7 years ago
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7878 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
7 years ago
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
...
Addressing #7612
7 years ago
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
...
[1.1.x] Fixing ANET encoder pulses
7 years ago
c26242a553
Fixing #7833
7 years ago
dac5f20a01
Patch SD file draw bug
7 years ago
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
7 years ago
355cba4aa7
Fixes for G33
7 years ago
e287e14354
Tweak spacing in utf8_mapper.h
7 years ago
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
...
[1.1.x] Added Slovak C2C3C4 mapper implementation.
7 years ago
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
7 years ago
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
7 years ago
0ec9a7f090
Fix xon_xoff_state initialization
7 years ago
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
7 years ago
bcb8722513
Fix DUAL_X_CARRIAGE manual move
...
Addressing #7745
7 years ago
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
7 years ago
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
7 years ago
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
7 years ago
94caabf89a
Add XON/XOFF options to example configs
7 years ago
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
7 years ago
8ab426c3a4
Updated all examples configurations
...
Forgot to update examples configurations. Done now
7 years ago
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
7 years ago
ac70048945
Only MarlinConfig.h ahead of feature block
7 years ago
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
7 years ago
802f147686
Remove some excess whitepsace
7 years ago
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
7 years ago
7f8ff0a724
Show leveling status on character LCD
7 years ago
723a34d9c7
Add confirmation to Init EEPROM command
7 years ago
2efd5b119d
Add USER_SCRIPT_RETURN option
7 years ago
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
7 years ago
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
7 years ago
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
7 years ago
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
7 years ago
3e28243076
No need for LCD_PINS_Dn when unused
7 years ago
bbb94b8f68
babystepping tweak
7 years ago
a277b43e30
Fix babystep menu display
7 years ago
8a994fb1b1
Fix encoder pulses for G3D_PANEL
7 years ago
ac2ac99e15
Fix bad logic in autostart
...
As pointed out by @marcio-ao in #7638
7 years ago
c1cc79176c
Full-featured Creality configs
7 years ago
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
7 years ago
cd09a83cfa
Add size note to SDSORT_LIMIT
7 years ago
9bbc2df217
General code cleanup, spacing
7 years ago
Scott Lahteine