e056bf8081
Added E-Jerk
14 years ago
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
14 years ago
97d42ca2b2
SDSUPPORT default disabled
14 years ago
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
14 years ago
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
14 years ago
35e57bf149
Added gen6 deluxe.
14 years ago
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
14 years ago
01d28c18ab
Fixed casting warning in sanguino
14 years ago
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
14 years ago
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
14 years ago
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
14 years ago
8816ef1c64
Small fixes after merge
14 years ago
d298dd121f
merged SBUBA82 and Justblair
14 years ago
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
14 years ago
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
14 years ago
e661578c84
support for GEN7 1.1,1.2 and 1.3
14 years ago
73344e69c1
Added temperature offset/gain settings for AD595.
14 years ago
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
14 years ago
0e3631ff4b
smaller changes
14 years ago
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
14 years ago
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
14 years ago
9173a5713b
Teensylu support.
14 years ago
bdb70c0509
Warning for 10k thermistor
14 years ago
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
14 years ago
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
14 years ago
13e2ad2831
- added info for using GEN7 configuration
14 years ago
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
14 years ago
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
14 years ago
212515148e
added m240 photography support. default off
14 years ago
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
14 years ago
84d9cf7339
merging
14 years ago
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
14 years ago
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
14 years ago
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
14 years ago
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
14 years ago
aa4f9a6474
better values.
14 years ago
87fd249c43
made runout prevention independent of tempeorarily set esteps
14 years ago
1ec0c3b68a
extruder runout prevention.
14 years ago
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
14 years ago
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
14 years ago
b99c49ec3b
Add option to only check endstop when homing
14 years ago
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
14 years ago
af22e9cd38
Some advance modifications
14 years ago
4f909963e4
make QUICKHOME configureable
14 years ago
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
14 years ago
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
14 years ago
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
14 years ago
aad4b75b94
First parts 2nd extruder
14 years ago
a0dc66f7bf
Home retract distance configureable per axis.
14 years ago
6d6f323535
make an option if sd-card stop should release the steppers.
14 years ago
Erik van der Zalm