060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
8 years ago
b8ddae61e2
ubl_state no longer needed
8 years ago
b07a2aa23c
Add HAS_MESH conditional
8 years ago
88857e8028
Move fade_scaling_factor_for_z to Planner
8 years ago
8e808fcadc
General cleanup, apply const
8 years ago
da93a272a0
Move leveling_is_active to a macro
8 years ago
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
8 years ago
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
8 years ago
355cba4aa7
Fixes for G33
8 years ago
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
8 years ago
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
8 years ago
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
8 years ago
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
8 years ago
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
8 years ago
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
8 years ago
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
8 years ago
802f147686
Remove some excess whitepsace
8 years ago
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
8 years ago
9bbc2df217
General code cleanup, spacing
8 years ago
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
8 years ago
0afd25a010
Fix caselight compile issues
8 years ago
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
8 years ago
8a184a526a
Marlin: Patch G33, allow M111 to give status
8 years ago
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
8 years ago
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
8 years ago
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
8 years ago
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
8 years ago
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
8 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
8 years ago
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
8 years ago
4817b39d98
Added new feature for AutoParking Extruder (APE)
8 years ago
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
8 years ago
30887feae3
Tweak some formatting in ABL G29
8 years ago
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
8 years ago
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
8 years ago
96ae53cf41
Use MOVE_SERVO macro where possible
8 years ago
ac76101ec3
Eliminate goto in gcode_M48
8 years ago
75e6ead5fd
Eliminate goto in gcode_G33
8 years ago
6bd63d27b5
Updates to G29 for probe error handling
8 years ago
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
8 years ago
0938c62b48
Neater position_is_reachable call
8 years ago
2864ef8c7f
Slight improvement to the line parsing logic, saving 8 cycles per character
8 years ago
534bbb81ff
Adding XON/XOFF and STATISTICS implementation
8 years ago
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
8 years ago
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
936d00dda8
Implement probing delay for piezo sensors
8 years ago
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
8 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
bfd396c13a
Patch to fix some compiler warnings
8 years ago
48c5f3dddf
Tweak kill action #ifdef
8 years ago
Scott Lahteine