ff26b7446c
Standardize LCD interface code for UBL a little
7 years ago
7b6ad28a5d
General UBL/G26 code cleanup
7 years ago
5d01a2f467
Move temperature reporting to Temperature class
7 years ago
6e197d4a42
Fix M503 S parameter
7 years ago
a5b20fec2f
Whitespace clean
7 years ago
67c6590fa6
Fixes for LCD change filament (T1438, T1221)
...
- "Change filament" now allows extruder selection on dual extruder heads (T1438)
- Fix for broken M600 resume_print; head motion during M600; backport from upstream (T1221)
7 years ago
348e989a50
Merge pull request #8687 from AnHardt/1_first_move_probing_homing
...
[1.1.x] Don't split first_move while homing or probing
7 years ago
b19846aca1
Don't split first_move while homing or probing
...
While homing or probing it might be bad if the stop/trobe triggers during the first part and the second is still in the buffer.
7 years ago
d951ba83e6
Show "Level Bed Corners" item with UBL too
...
Addressing #8676
7 years ago
203a445bc1
Minimal include for speed_lookuptable
7 years ago
9edefa645d
Remove skew warning that could crash the planner
7 years ago
4608e1f590
Merge pull request #8681 from thinkyhead/bf1_pidtempbed_fix
...
[1.1.x] Change K1 to required option PID_K1
7 years ago
794f8f1329
Update K1 => PID_K1
7 years ago
b1f3dfab28
Fix for #8669 ( #8677 )
7 years ago
2d6c84a817
Cleanup constexpr in planner.cpp
7 years ago
23291a0466
Fix SKEW_CORRECTION without leveling
7 years ago
a0799ea772
Bumped up controller fan speed on Mini 2.
...
- Trying to resolve continued X driver overheating.
7 years ago
a0b2a246ca
Endstop now checked during non-homing moves (T1393)
7 years ago
b25388ba25
Fix T1397 for all Minis; adjust Mini 2 probe pts.
...
- On Mini will now raise head before homing Y to clear wiper pad (T1397).
- On Mini 2, probe locations shifted to land on washers when using bumpers.
7 years ago
83a1a70103
Creality pins spacing, MINIPANEL CS pin
7 years ago
47f6fc1e07
Set initial endstops state
...
Addressing #8662
7 years ago
88b34d2bb6
Merge pull request #8655 from kein0r/bugfix-1.1.x
...
Added Support for RAMPS 1.4 Plus board
7 years ago
f36fdc74ac
Added RAMPS v1.4 Plus board
...
Conflicts:
Marlin/boards.h
7 years ago
ff258d43e7
Merge pull request #8661 from lumbric/bugfix-1.1.x
...
Add missing library in Makefile
7 years ago
d8ef6faa80
Cleanup for dogm_bitmaps
7 years ago
59eb77fd28
One fewer move required…
7 years ago
dde0e9ee0a
Add missing library in Makefile
...
When using RELOC_WORKAROUND library needs to be linked explicitly, otherwise
eeprom functions are not available.
Thanks to @rfjakob for finding the crucial hint to solve this issue.
7 years ago
860d98a897
[1.1.x] SERIAL_XON_XOFF not supported on USB-native AVR devices ( #8653 )
...
* SERIAL_XON_XOFF not supported on USB-native AVR devices
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
7 years ago
f879a77611
Trinamic tuning to keep driver from overheating.
...
- Tuned TOFF, TBL, TSTRT and TEND for least temperature rise during prints.
- Slightly increased fan speed to increase cooling capacity.
- Disabled stealth mode in XY as this tends to run hotter.
7 years ago
3abd307691
Merge pull request #8658 from thinkyhead/backup_1_split_first
...
[1.1.x] Split first move to planner for better chaining
7 years ago
000818f5e4
Split first move to planner for better chaining
7 years ago
1bbf55a7f7
Merge pull request #8648 from thinkyhead/bf1_planner_split_first
...
[1.1.x] Revert PR #8608 — split first planner move
7 years ago
298a357a43
Revert "Merge pull request #8608 from thinkyhead/bf1_planner_split_first"
...
This reverts commit 0eef0ff0ded8582b7506
7 years ago
44d2c5ef88
Fix M49 console hang
7 years ago
1600f7d4ee
Merge pull request #8635 from fiveangle/bf1_report_xonxoff
...
[1.1.x] Report SERIAL_XON_XOFF in M115
7 years ago
71a4c04dd5
Merge pull request #8636 from thinkyhead/bf1_ubl_uses_LSL
...
[1.1.x] Use custom segment length for UBL Cartesian
7 years ago
0eef0ff0de
Merge pull request #8608 from thinkyhead/bf1_planner_split_first
...
[1.1.x] Split first planner move for better chaining
7 years ago
1d0ee83e18
Split first move to planner for better chaining
...
Address #8573 , #8595
7 years ago
db8631e49a
Use custom segment length for UBL Cartesian
7 years ago
2e295759f2
[1.1.x] Report SERIAL_XON_XOFF in M115
...
-Report SERIAL_XON_XOFF in Extended Capabilites M115 report for hosts
-Remove outdated 256 size limitation from comments on RX_BUFFER_SIZE defines
config updates
-Update error checking conditions
7 years ago
d8582b7506
Bring configurations up to date
7 years ago
7f656b867f
Example configuration files for the Wanhao Duplicator 6 for bugfix-1.1.x ( #8614 )
...
* Add default configuration files for the Wanhao Duplicator 6.
* Update Configuration.h
7 years ago
077fed1d88
Fix a homing comment
7 years ago
152c5d2616
Followup to #8613
7 years ago
26c5bbc5a7
Rename inverse_mm_s => inverse_secs
7 years ago
344e6b857a
configuration_store.cpp: Fix in MarlinSettings::load for updated size of DELTA variables ( #8630 )
7 years ago
81e52138cc
More corrections for Bi-Linear to work with G26
7 years ago
a27a9b63e4
Get Bi_Linear macros correct to work with G26
...
G26 uses logic that looks like:
```
ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS));
```
The Bi-Linear macros need parenthesis to work correctly.
7 years ago
8b7c274db5
Comment/cleanup motion code
7 years ago
7bed539fdb
Fix missing return values in G33_auto_tune
7 years ago
Scott Lahteine