38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
11 years ago
152b681bb5
Added link to controller github
...
Added the link to the github information about the
ELB_FULL_GRAPHIC_CONTROLLER
11 years ago
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
11 years ago
ca8d1756d5
Define fixes
...
Fixed a couple defines that were not changed or commented out.
11 years ago
a83bf18ee1
More functional seperation
...
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
11 years ago
047e688e93
Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER
...
Rename of define to avoid confusion between the controller and the
display which had similar names.
11 years ago
1999ac415c
Formatting Changes
...
Fixes for some code formatting changes and commenting out the
ADAFRUIT_ST7565 define that was left defined.
11 years ago
41f8cdb3a6
ADAFRUIT_ST7565
...
Added support for new display type
11 years ago
78beef2d73
Use Mendel default for INVERT_Y_DIR
11 years ago
f65833931d
Formatting tweaks
11 years ago
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
11 years ago
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
11 years ago
181ccc884c
Edit thermal runaway description
11 years ago
26015b02d8
Fixed typo and updated Configuration.h of configurator
11 years ago
aedd580911
Updated all configuration.h examples
11 years ago
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
11 years ago
013a09dbe6
Added configurable script for filrunout form configuration.h
11 years ago
514d8ac460
Enable TRP for the bed
...
in all Configurations.
11 years ago
2610b8d047
Enable thermal runaway protection by default
11 years ago
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
11 years ago
0970102950
Remove obsolete STRING_URL
11 years ago
6b1b71837c
Intit. commit for Chinese
...
Edited the European part of 'ISO10646_CN.fon' to match the existing fonts.
Added Chinese font to make_fonts.bat
Created 'dogm_font_data_ISO10646_CN.h'
Added Chinese to 'language.h'
Added 'language_cn.h' with some minor edits.
Added Chinese font in 'language_en.h' to not fall back to European font.
Added cn to 'Configuration.h'
Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names.
In 'dogm_lcd_implementation.h'
Added Chinese Font
Made 1 pixel more room for the larger Chinese font on the status line.
Changed geometry of the 'select bar' by one pixel.
Changed the way the position for values and postcars are set.
11 years ago
5c29fda167
Add a warning for DISABLE_[XYZ] options
11 years ago
3a27a78f9e
Commented REPRAP_DISCOUNT_SMART_CONTROLLER again
...
and removed some tabs.
11 years ago
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
11 years ago
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
11 years ago
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
11 years ago
56fc3a4835
bgr -> bg
...
+ update in documentation
11 years ago
6248c93f37
Introduction of Bulgarian - language_bgr.h
...
Thank you @Nprod!
11 years ago
7dc64efe67
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
11 years ago
4788b59300
Thermistor values for configurator
11 years ago
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
11 years ago
eb6e3886f4
Set version to "1.0.3 dev"
11 years ago
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
11 years ago
002340f32c
Merge branch 'Development-Marlin' into Development
11 years ago
967db181d0
Latest upstream commits
11 years ago
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
11 years ago
9a093b2e8f
Added #error + mention not to enable ABL and Mesh at the same time
11 years ago
46474cf2f2
Incorporate @section headers from configurator
11 years ago
d24ea7c03f
Added Comment in hope of github seeing these updates
11 years ago
ea10601406
Merge branch 'Development-Marlin' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
11 years ago
b02a55e60f
Fixed scara directions
...
Config said for a delta instead of for a scara
11 years ago
c065da52ec
Spacing and spelling
11 years ago
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
11 years ago
a469d796e1
Add cleanups needed for #1772
11 years ago
c0ca26cd50
Merge branch 'Development' into fixup_probing
...
Latest upstream commits
11 years ago
0e8182bbf2
Additional pin tests, cleanup
11 years ago
6b91b7b411
Mesh bed leveling: Added G29 S3 + finer steps in manual probing.
...
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
11 years ago
a57862e29f
Cleaning up code in prep for merge with upstream.
11 years ago
a508d835db
Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP.
...
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
11 years ago
Scott Lahteine