GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
7 years ago
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
7 years ago
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
8 years ago
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
8 years ago
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
8 years ago
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
8 years ago
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
8 years ago
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
8 years ago
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
8 years ago
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
8 years ago
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
8 years ago
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
8 years ago
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
8 years ago
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
8 years ago
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
8 years ago
Scott Lahteine
0938c62b48
Neater position_is_reachable call
8 years ago
etagle
2864ef8c7f
Slight improvement to the line parsing logic, saving 8 cycles per character
8 years ago
etagle
534bbb81ff
Adding XON/XOFF and STATISTICS implementation
8 years ago
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9
.
Fixes #6956 , fixes #7050 and fixes #7291
8 years ago
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
8 years ago
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
8 years ago
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
8 years ago
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
8 years ago
Scott Lahteine
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
8 years ago
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
8 years ago
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
8 years ago
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
8 years ago
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
8 years ago
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
8 years ago
Scott Lahteine
51864fd365
Add bed size as a configuration option
8 years ago
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
8 years ago
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
8 years ago
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
8 years ago
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
8 years ago
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
8 years ago
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
8 years ago
Scott Lahteine
4d98e3f0a7
General cleanup
8 years ago
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
8 years ago
Roxy-3D
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
8 years ago
Scott Lahteine
0873c667fa
Apply coding standards to recent merges
8 years ago
Scott Lahteine
8c2907d10f
Fix ABL broken by recent change
8 years ago
Roxy-3D
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
8 years ago
LVD-AC
4bc79ec877
Updates for G33-LCD interface
8 years ago
João Brázio
2065591daf
Add support for BQ heated bed kit with Hephestos 2
8 years ago
Scott Lahteine
5ef1e5ef60
Tweaks for M43
8 years ago
Scott Lahteine
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
8 years ago
Scott Lahteine
f713f25fa5
Clean up excess whitespace
8 years ago
Scott Lahteine
fc9ce65095
Add `BUSY_WHILE_HEATING` for hosts that need it
8 years ago
Scott Lahteine
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
8 years ago
Scott Lahteine
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
8 years ago
LVD-AC
3efe4aeef8
Add PROBE_MANUALLY support to G33
8 years ago
Scott Lahteine
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
8 years ago
Ben Lye
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
8 years ago
Scott Lahteine
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
8 years ago
LVD-AC
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
8 years ago
Scott Lahteine
6a3967ee33
Corrections for probe_pt parameters
8 years ago
Scott Lahteine
534bffa7a9
Correct comment on ABL G29
8 years ago
Scott Lahteine
e1e1a0c344
Provide a default CUSTOM_BOOTSCREEN_TIMEOUT
8 years ago
Scott Lahteine
d609489b22
Drop setup_homepin
8 years ago
Scott Lahteine
ae5923a3d0
Make lcd_bootscreen common to both
8 years ago
Scott Lahteine
dcec7178d1
Expose DISABLE_M503 option as a test option
8 years ago
Scott Lahteine
f17bae1f70
Changes for ubl_lcd_map_control patch
8 years ago
Scott Lahteine
e3cedfa0ec
Fix a compiler warning
8 years ago
Scott Lahteine
bb0508b6cf
Fix comment in M115 code
8 years ago
Scott Lahteine
85777a56c6
Add A (action) and E (echo) parameters to M118
8 years ago
Ben Lye
98d362c2da
Adding M118 command to send text to serial
...
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example. Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
8 years ago
Scott Lahteine
fc140c4962
Followup for I2C_POSITION_ENCODERS
8 years ago
Scott Lahteine
f4246dc8ff
Merge pull request #7165 from thinkyhead/bf_parser_shorthand
...
Use parser.seenval, add shorthand functions
8 years ago
Scott Lahteine
05449cf6ee
Add shorthand value accessors to gcode.h
8 years ago
Scott Lahteine
12f092c812
Cleanups to gcode.h, use seenval()
8 years ago
Scott Lahteine
941943c167
Apply const, spacing, etc.
8 years ago
Scott Lahteine
5b11b33854
Add support for Průša MK2 Multiplexer
8 years ago
Scott Lahteine
c2c8aafda2
Merge pull request #7157 from thinkyhead/bf_g33_f_parameter
...
G33 F and Height bug fix
8 years ago
Scott Lahteine
f0f9fb7465
Remove line that does nothing
8 years ago
LVD-AC
99592c8458
Update G33: Add F, fix height bug
8 years ago
Ben Lye
31514f453a
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
...
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
8 years ago
Scott Lahteine
3c7bfe798d
Various cleanups ahead of digipot save
8 years ago
Scott Lahteine
80a232419d
CNC workspace planes and 'P' argument for G2/G3
8 years ago
Scott Lahteine
5fb0d401eb
Formatting tweaks
8 years ago
Scott Lahteine
a9f8e518bf
Fix FILAMENT_WIDTH_SENSOR infinite loop issue
...
Addressing #6992 and #5851
8 years ago
Scott Lahteine
5c59ee4e93
Use current (raw) Z if omitted from G29 WXY or G29 WIJ.
8 years ago
Scott Lahteine
37bc0fce62
Make G29 compatible with M206 Z and G92 Z
...
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.
To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.
What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
8 years ago
Scott Lahteine
6c45d0fd81
Apply maths macros and type changes ahead of HAL
8 years ago
Florian Heilmann
6dcf42f1a7
Add Z Fade Height to M420 output if it is enabled ( #7042 )
...
* Add Z Fade Height to M420 Output
Echo the z-fade height when M420 is called, if it is enabled.
* Fix Whitespace
* Fix Compiler complaint
* Missing semi-colon
8 years ago
Scott Lahteine
907cafcbfd
Support for two switching extruders
8 years ago
Scott Lahteine
4c3dc8bf07
Remove set_current_to_destination from resume_print
...
Addressing #7057
8 years ago
Scott Lahteine
4857a3ba48
Formatting and spelling
8 years ago
Thomas Moore
3d24c329af
M600 fixes
8 years ago
Scott Lahteine
d4270f15a9
Spacing tweak in setup()
8 years ago
Jim Brown
3d043976f7
Add option to disallow filament change without homing first
8 years ago
Scott Lahteine
428be27893
Formatting adjustments
8 years ago
Scott Lahteine
7164fd499e
Tweak to G33 P error
8 years ago
Scott Lahteine
c10d763d98
Simpler prepare move conditions
8 years ago
Scott Lahteine
09bc34f4dc
Allow arbitrarily long retraction
8 years ago
Scott Lahteine
4414825e0d
Merge pull request #7038 from thinkyhead/bf_PCA9632
...
PCA9632 PWM color LED support
8 years ago
Bob-the-Kuhn
9dda022705
fix compile errors
...
================================
Changed to conditional compile for AT90USB issue
8 years ago
Jim Brown
26d20ebcfc
Don't allow filament change without homing first ( #7054 )
8 years ago
Roxy-3D
824f71d503
LCD Panel Interactive Mesh Editing ( #7045 )
...
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.
Radar display (and control) of the UBL Interactive Mesh Editing.
8 years ago