Marlin Firmware for a JTech Photonics Laser on a LulzBot TAZ 3D Printer https://www.forksand.com
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Erik van der Zalm 5a1787b2f4
Fix M109
13 years ago
Marlin Fix M109 13 years ago
README first-commit 13 years ago

README

This firmware is a mashup between Sprinter, grbl and many original parts.

(https://github.com/kliment/Sprinter)
(https://github.com/simen/grbl/tree)

Features:
- Interrupt based movement with real linear acceleration
- High steprate
- Look ahead (Keep the speed high when possible. High cornering speed)
- Interrupt based temperature protection
- preliminary support for Matthew Roberts advance algorithm
For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html

This firmware is optimized for gen6 electronics.

The default baudrate is 250000.
This gives less communication errors then regular baudrates.

========================================================================================

Configuring and compilation


Install the arduino software version 0018
http://www.arduino.cc/en/Main/Software

Install the sanguino software, version 0018
http://sanguino.cc/useit

Install pronterface
https://github.com/kliment/Printrun

Copy the Marlin firmware
https:/github.com/ErikZalm/Marlin
(Use the download button)

Start the arduino IDE.
Select Tools -> Board -> Sanguino
Select the correct serial port in Tools ->Serial Port
Open Marlin.pde

Change the printer specific setting in Configuration.h to the correct values.

The following values are the most important:
- float axis_steps_per_unit[].... // Set the correct steps / mm in the corresponding field
- const bool ENDSTOPS_INVERTING = false; // Change if only positive moves are executed
- #define INVERT_x_DIR true // Change if the motor direction is wrong

Click the Upload button
If all goes well the firmware is uploading

Start pronterface

Select the correct Serial Port. Type 250000 in the baudrate field.
Press the Connect button.