Complete TPI protocol code to enter and exit TPI programming mode for the ATTINY 6-pin devices.

Projects/AVRISP/Lib/XPROG/TINYNVM.c

@@ -38,42 +38,33 @@
 
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 
-/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
+/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read.
- *  calculation.
  *
  *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
  */
-bool XMEGANVM_WaitWhileNVMBusBusy(void)
+bool TINYNVM_WaitWhileNVMBusBusy(void)
 {
-	// TODO
+	TCNT0 = 0;
+	TIFR0 = (1 << OCF1A);
 			
-	return false;
+	uint8_t TimeoutMS = TINY_NVM_BUSY_TIMEOUT_MS;
-}
-
-/** Waits while the target's NVM controller is busy performing an operation, exiting if the
- *  timeout period expires.
- *
- *  \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
- */
-bool XMEGANVM_WaitWhileNVMControllerBusy(void)
-{
-	// TODO
 	
-	return false;
+	/* Poll the STATUS register to check to see if NVM access has been enabled */
-}
+	while (TimeoutMS)
+	{
+		/* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
+		XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
+		if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)
+		  return true;
 
-/** Retrieves the CRC value of the given memory space.
+		if (TIFR0 & (1 << OCF1A))
- *
+		{
- *  \param[in]  CRCCommand  NVM CRC command to issue to the target
+			TIFR0 = (1 << OCF1A);
- *  \param[out] CRCDest     CRC Destination when read from the target
+			TimeoutMS--;
- *
+		}
- *  \return Boolean true if the command sequence complete successfully
+	}
- */
-bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
-{
-	// TODO
 	
-	return true;
+	return false;
 }
 
 /** Reads memory from the target's memory spaces.
@@ -84,7 +75,7 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest)
  *
  *  \return Boolean true if the command sequence complete successfully
  */
-bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
+bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize)
 {
 	// TODO
 	
@@ -99,7 +90,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const
  *
  *  \return Boolean true if the command sequence complete successfully
  */
-bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
+bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer)
 {
 	// TODO
 	
@@ -113,7 +104,7 @@ bool XMEGANVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddres
  *
  *  \return Boolean true if the command sequence complete successfully
  */
-bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
+bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
 {
 	// TODO
 	

Projects/AVRISP/Lib/XPROG/TINYNVM.h

@@ -59,10 +59,9 @@
 		#define TINY_NVM_BUSY_TIMEOUT_MS       100
 
 	/* Function Prototypes: */
-		bool TINYNVM_WaitWhileNVMControllerBusy(void);
+		bool TINYNVM_WaitWhileNVMBusBusy(void);
 		bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);
 		bool TINYNVM_WriteMemory(const uint8_t WriteCommand, const uint32_t WriteAddress, const uint8_t* WriteBuffer);
 		bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);
-		bool TINYNVM_WaitWhileNVMBusBusy(void);
 
 #endif

Projects/AVRISP/Lib/XPROG/XMEGANVM.h

@@ -108,6 +108,7 @@
 	/* Function Prototypes: */
 		void XMEGANVM_SendNVMRegAddress(const uint8_t Register);
 		void XMEGANVM_SendAddress(const uint32_t AbsoluteAddress);
+		bool XMEGANVM_WaitWhileNVMBusBusy(void);
 		bool XMEGANVM_WaitWhileNVMControllerBusy(void);
 		bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest);
 		bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, const uint16_t ReadSize);
@@ -116,6 +117,5 @@
 		                              const uint8_t WritePageCommand, const uint8_t PageMode, const uint32_t WriteAddress,
 		                              const uint8_t* WriteBuffer, const uint16_t WriteSize);
 		bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address);
-		bool XMEGANVM_WaitWhileNVMBusBusy(void);
 
 #endif

Projects/AVRISP/Lib/XPROG/XPROGProtocol.c

@@ -132,7 +132,13 @@ static void XPROGProtocol_EnterXPROGMode(void)
 		/* Enable TPI programming mode with the attached target */
 		XPROGTarget_EnableTargetTPI();
 		
-		// TODO - enable NVM bus via KEY		
+		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
+		XPROGTarget_SendByte(TPI_CMD_SKEY);	
+		for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
+		  XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
+
+		/* Wait until the NVM bus becomes active */
+		NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();
 	}
 	
 	Endpoint_Write_Byte(CMD_XPROG);
@@ -159,7 +165,9 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 	}
 	else
 	{
-		// TODO - Disable TPI via register
+		/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
+		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);	
+		XPROGTarget_SendByte(0x00);
 	
 		XPROGTarget_DisableTargetTPI();
 	}