Jack Humbert
9 years ago
parent
ff8d8a50df
commit
46e7fb2d3c
@ -1,116 +0,0 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
|
||||||
TARGET = gh60_pjrc
|
|
||||||
|
|
||||||
# Directory common source filess exist
|
|
||||||
TOP_DIR = ../..
|
|
||||||
|
|
||||||
# Directory keyboard dependent files exist
|
|
||||||
TARGET_DIR = .
|
|
||||||
|
|
||||||
# project specific files
|
|
||||||
SRC = keymap_common.c \
|
|
||||||
matrix.c \
|
|
||||||
led.c
|
|
||||||
|
|
||||||
ifdef KEYMAP
|
|
||||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
|
||||||
else
|
|
||||||
SRC := keymap_jack.c $(SRC)
|
|
||||||
endif
|
|
||||||
|
|
||||||
CONFIG_H = config.h
|
|
||||||
|
|
||||||
|
|
||||||
# MCU name, you MUST set this to match the board you are using
|
|
||||||
# type "make clean" after changing this, so all files will be rebuilt
|
|
||||||
MCU = atmega32u4
|
|
||||||
#MCU = at90usb1286
|
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# Normally the first thing your program should do is set the clock prescaler,
|
|
||||||
# so your program will run at the correct speed. You should also set this
|
|
||||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
|
||||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover(+500)
|
|
||||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
|
||||||
|
|
||||||
|
|
||||||
# Search Path
|
|
||||||
VPATH += $(TARGET_DIR)
|
|
||||||
VPATH += $(TOP_DIR)
|
|
||||||
|
|
||||||
include $(TOP_DIR)/protocol/pjrc.mk
|
|
||||||
include $(TOP_DIR)/common.mk
|
|
||||||
include $(TOP_DIR)/rules.mk
|
|
||||||
|
|
||||||
plain: OPT_DEFS += -DKEYMAP_PLAIN
|
|
||||||
plain: all
|
|
||||||
|
|
||||||
poker: OPT_DEFS += -DKEYMAP_POKER
|
|
||||||
poker: all
|
|
||||||
|
|
||||||
poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
|
|
||||||
poker_set: all
|
|
||||||
|
|
||||||
poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
|
|
||||||
poker_bit: all
|
|
||||||
@ -1,234 +0,0 @@
|
|||||||
/*
|
|
||||||
Copyright 2012 Jun Wako
|
|
||||||
Generated by planckkeyboard.com (2014 Jack Humbert)
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* scan matrix
|
|
||||||
*/
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include "print.h"
|
|
||||||
#include "debug.h"
|
|
||||||
#include "util.h"
|
|
||||||
#include "matrix.h"
|
|
||||||
|
|
||||||
#ifndef DEBOUNCE
|
|
||||||
# define DEBOUNCE 10
|
|
||||||
#endif
|
|
||||||
static uint8_t debouncing = DEBOUNCE;
|
|
||||||
|
|
||||||
/* matrix state(1:on, 0:off) */
|
|
||||||
static matrix_row_t matrix[MATRIX_ROWS];
|
|
||||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
|
||||||
|
|
||||||
static matrix_row_t read_cols(void);
|
|
||||||
static void init_cols(void);
|
|
||||||
static void unselect_rows(void);
|
|
||||||
static void select_row(uint8_t row);
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_rows(void)
|
|
||||||
{
|
|
||||||
return MATRIX_ROWS;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_cols(void)
|
|
||||||
{
|
|
||||||
return MATRIX_COLS;
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_init(void)
|
|
||||||
{
|
|
||||||
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
|
|
||||||
MCUCR |= (1<<JTD);
|
|
||||||
MCUCR |= (1<<JTD);
|
|
||||||
|
|
||||||
backlight_init_ports();
|
|
||||||
|
|
||||||
// Turn status LED on
|
|
||||||
DDRE |= (1<<6);
|
|
||||||
PORTE |= (1<<6);
|
|
||||||
|
|
||||||
// initialize row and col
|
|
||||||
unselect_rows();
|
|
||||||
init_cols();
|
|
||||||
|
|
||||||
// initialize matrix state: all keys off
|
|
||||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
|
||||||
matrix[i] = 0;
|
|
||||||
matrix_debouncing[i] = 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
uint8_t matrix_scan(void)
|
|
||||||
{
|
|
||||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
||||||
select_row(i);
|
|
||||||
_delay_us(30); // without this wait read unstable value.
|
|
||||||
matrix_row_t cols = read_cols();
|
|
||||||
if (matrix_debouncing[i] != cols) {
|
|
||||||
matrix_debouncing[i] = cols;
|
|
||||||
if (debouncing) {
|
|
||||||
debug("bounce!: "); debug_hex(debouncing); debug("\n");
|
|
||||||
}
|
|
||||||
debouncing = DEBOUNCE;
|
|
||||||
}
|
|
||||||
unselect_rows();
|
|
||||||
}
|
|
||||||
|
|
||||||
if (debouncing) {
|
|
||||||
if (--debouncing) {
|
|
||||||
_delay_ms(1);
|
|
||||||
} else {
|
|
||||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
||||||
matrix[i] = matrix_debouncing[i];
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
bool matrix_is_modified(void)
|
|
||||||
{
|
|
||||||
if (debouncing) return false;
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
|
||||||
{
|
|
||||||
return (matrix[row] & ((matrix_row_t)1<col));
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
matrix_row_t matrix_get_row(uint8_t row)
|
|
||||||
{
|
|
||||||
return matrix[row];
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_print(void)
|
|
||||||
{
|
|
||||||
print("\nr/c 0123456789ABCDEF\n");
|
|
||||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
|
||||||
phex(row); print(": ");
|
|
||||||
pbin_reverse16(matrix_get_row(row));
|
|
||||||
print("\n");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t matrix_key_count(void)
|
|
||||||
{
|
|
||||||
uint8_t count = 0;
|
|
||||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
||||||
count += bitpop16(matrix[i]);
|
|
||||||
}
|
|
||||||
return count;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void init_cols(void)
|
|
||||||
{
|
|
||||||
int B = 0, C = 0, D = 0, E = 0, F = 0;
|
|
||||||
for(int x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
int col = COLS[x];
|
|
||||||
if ((col & 0xF0) == 0x20) {
|
|
||||||
B |= (1<<(col & 0x0F));
|
|
||||||
} else if ((col & 0xF0) == 0x30) {
|
|
||||||
C |= (1<<(col & 0x0F));
|
|
||||||
} else if ((col & 0xF0) == 0x40) {
|
|
||||||
D |= (1<<(col & 0x0F));
|
|
||||||
} else if ((col & 0xF0) == 0x50) {
|
|
||||||
E |= (1<<(col & 0x0F));
|
|
||||||
} else if ((col & 0xF0) == 0x60) {
|
|
||||||
F |= (1<<(col & 0x0F));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
DDRB &= ~(B); PORTB |= (B);
|
|
||||||
DDRC &= ~(C); PORTC |= (C);
|
|
||||||
DDRD &= ~(D); PORTD |= (D);
|
|
||||||
DDRE &= ~(E); PORTE |= (E);
|
|
||||||
DDRF &= ~(F); PORTF |= (F);
|
|
||||||
}
|
|
||||||
|
|
||||||
static matrix_row_t read_cols(void)
|
|
||||||
{
|
|
||||||
matrix_row_t result = 0;
|
|
||||||
for(int x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
int col = COLS[x];
|
|
||||||
if ((col & 0xF0) == 0x20) {
|
|
||||||
result |= (PINB&(1<<(col & 0x0F)) ? 0 : (1<<x));
|
|
||||||
} else if ((col & 0xF0) == 0x30) {
|
|
||||||
result |= (PINC&(1<<(col & 0x0F)) ? 0 : (1<<x));
|
|
||||||
} else if ((col & 0xF0) == 0x40) {
|
|
||||||
result |= (PIND&(1<<(col & 0x0F)) ? 0 : (1<<x));
|
|
||||||
} else if ((col & 0xF0) == 0x50) {
|
|
||||||
result |= (PINE&(1<<(col & 0x0F)) ? 0 : (1<<x));
|
|
||||||
} else if ((col & 0xF0) == 0x60) {
|
|
||||||
result |= (PINF&(1<<(col & 0x0F)) ? 0 : (1<<x));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
return result;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_rows(void)
|
|
||||||
{
|
|
||||||
int B = 0, C = 0, D = 0, E = 0, F = 0;
|
|
||||||
for(int x = 0; x < MATRIX_ROWS; x++) {
|
|
||||||
int row = ROWS[x];
|
|
||||||
if ((row & 0xF0) == 0x20) {
|
|
||||||
B |= (1<<(row & 0x0F));
|
|
||||||
} else if ((row & 0xF0) == 0x30) {
|
|
||||||
C |= (1<<(row & 0x0F));
|
|
||||||
} else if ((row & 0xF0) == 0x40) {
|
|
||||||
D |= (1<<(row & 0x0F));
|
|
||||||
} else if ((row & 0xF0) == 0x50) {
|
|
||||||
E |= (1<<(row & 0x0F));
|
|
||||||
} else if ((row & 0xF0) == 0x60) {
|
|
||||||
F |= (1<<(row & 0x0F));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
DDRB &= ~(B); PORTB |= (B);
|
|
||||||
DDRC &= ~(C); PORTC |= (C);
|
|
||||||
DDRD &= ~(D); PORTD |= (D);
|
|
||||||
DDRE &= ~(E); PORTE |= (E);
|
|
||||||
DDRF &= ~(F); PORTF |= (F);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void select_row(uint8_t row)
|
|
||||||
{
|
|
||||||
int row_pin = ROWS[row];
|
|
||||||
if ((row_pin & 0xF0) == 0x20) {
|
|
||||||
DDRB |= (1<<(row_pin & 0x0F));
|
|
||||||
PORTB &= ~(1<<(row_pin & 0x0F));
|
|
||||||
} else if ((row_pin & 0xF0) == 0x30) {
|
|
||||||
DDRC |= (1<<(row_pin & 0x0F));
|
|
||||||
PORTC &= ~(1<<(row_pin & 0x0F));
|
|
||||||
} else if ((row_pin & 0xF0) == 0x40) {
|
|
||||||
DDRD |= (1<<(row_pin & 0x0F));
|
|
||||||
PORTD &= ~(1<<(row_pin & 0x0F));
|
|
||||||
} else if ((row_pin & 0xF0) == 0x50) {
|
|
||||||
DDRE |= (1<<(row_pin & 0x0F));
|
|
||||||
PORTE &= ~(1<<(row_pin & 0x0F));
|
|
||||||
} else if ((row_pin & 0xF0) == 0x60) {
|
|
||||||
DDRF |= (1<<(row_pin & 0x0F));
|
|
||||||
PORTF &= ~(1<<(row_pin & 0x0F));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@ -0,0 +1,29 @@
|
|||||||
|
#include "planck.h"
|
||||||
|
|
||||||
|
void * matrix_init_user(void) {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void * matrix_scan_user(void) {
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
void *matrix_init_kb(void) {
|
||||||
|
#ifdef BACKLIGHT_ENABLE
|
||||||
|
backlight_init_ports();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Turn status LED on
|
||||||
|
DDRE |= (1<<6);
|
||||||
|
PORTE |= (1<<6);
|
||||||
|
|
||||||
|
if (matrix_init_user) {
|
||||||
|
(*matrix_init_user)();
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
void *matrix_scan_kb(void) {
|
||||||
|
if (matrix_scan_user) {
|
||||||
|
(*matrix_scan_user)();
|
||||||
|
}
|
||||||
|
};
|
||||||
@ -0,0 +1,38 @@
|
|||||||
|
#ifndef PLANCK_H
|
||||||
|
#define PLANCK_H
|
||||||
|
|
||||||
|
#include "matrix.h"
|
||||||
|
#include "keymap_common.h"
|
||||||
|
#include "backlight.h"
|
||||||
|
#include <stddef.h>
|
||||||
|
|
||||||
|
#define PLANCK_MIT( \
|
||||||
|
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define PLANCK_GRID( \
|
||||||
|
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
|
||||||
|
}
|
||||||
|
|
||||||
|
void * matrix_init_user(void);
|
||||||
|
void * matrix_scan_user(void);
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,69 @@
|
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
QUANTUM_DIR = $(TOP_DIR)/quantum
|
||||||
|
|
||||||
|
# # project specific files
|
||||||
|
SRC += $(QUANTUM_DIR)/keymap_common.c \
|
||||||
|
$(QUANTUM_DIR)/matrix.c \
|
||||||
|
$(QUANTUM_DIR)/led.c
|
||||||
|
|
||||||
|
ifdef MIDI_ENABLE
|
||||||
|
SRC += $(QUANTUM_DIR)/keymap_midi.c \
|
||||||
|
$(QUANTUM_DIR)/beeps.c
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifdef UNICODE_ENABLE
|
||||||
|
SRC += $(QUANTUM_DIR)/keymap_unicode.c
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Optimize size but this may cause error "relocation truncated to fit"
|
||||||
|
#EXTRALDFLAGS = -Wl,--relax
|
||||||
|
|
||||||
|
# Search Path
|
||||||
|
VPATH += $(TARGET_DIR)
|
||||||
|
VPATH += $(TOP_DIR)
|
||||||
|
VPATH += $(QUANTUM_DIR)
|
||||||
|
|
||||||
|
include $(TOP_DIR)/protocol/lufa.mk
|
||||||
|
|
||||||
|
include $(TOP_DIR)/common.mk
|
||||||
|
include $(TOP_DIR)/rules.mk
|
||||||
|
|
||||||
@ -0,0 +1,74 @@
|
|||||||
|
#ifndef KEYMAP_COLEMAK_H
|
||||||
|
#define KEYMAP_COLEMAK_H
|
||||||
|
|
||||||
|
#include "keymap_common.h"
|
||||||
|
// For software implementation of colemak
|
||||||
|
#define CM_Q KC_Q
|
||||||
|
#define CM_W KC_W
|
||||||
|
#define CM_F KC_E
|
||||||
|
#define CM_P KC_R
|
||||||
|
#define CM_G KC_T
|
||||||
|
#define CM_J KC_Y
|
||||||
|
#define CM_L KC_U
|
||||||
|
#define CM_U KC_I
|
||||||
|
#define CM_Y KC_O
|
||||||
|
#define CM_SCLN KC_P
|
||||||
|
|
||||||
|
#define CM_A KC_A
|
||||||
|
#define CM_R KC_S
|
||||||
|
#define CM_S KC_D
|
||||||
|
#define CM_T KC_F
|
||||||
|
#define CM_D KC_G
|
||||||
|
#define CM_H KC_H
|
||||||
|
#define CM_N KC_J
|
||||||
|
#define CM_E KC_K
|
||||||
|
#define CM_I KC_L
|
||||||
|
#define CM_O KC_SCLN
|
||||||
|
|
||||||
|
#define CM_Z KC_Z
|
||||||
|
#define CM_X KC_X
|
||||||
|
#define CM_C KC_C
|
||||||
|
#define CM_V KC_V
|
||||||
|
#define CM_B KC_B
|
||||||
|
#define CM_K KC_N
|
||||||
|
#define CM_M KC_M
|
||||||
|
#define CM_COMM KC_COMM
|
||||||
|
#define CM_DOT KC_DOT
|
||||||
|
#define CM_SLSH KC_SLSH
|
||||||
|
|
||||||
|
// Make it easy to support these in macros
|
||||||
|
// TODO: change macro implementation so these aren't needed
|
||||||
|
#define KC_CM_Q CM_Q
|
||||||
|
#define KC_CM_W CM_W
|
||||||
|
#define KC_CM_F CM_F
|
||||||
|
#define KC_CM_P CM_P
|
||||||
|
#define KC_CM_G CM_G
|
||||||
|
#define KC_CM_J CM_J
|
||||||
|
#define KC_CM_L CM_L
|
||||||
|
#define KC_CM_U CM_U
|
||||||
|
#define KC_CM_Y CM_Y
|
||||||
|
#define KC_CM_SCLN CM_SCLN
|
||||||
|
|
||||||
|
#define KC_CM_A CM_A
|
||||||
|
#define KC_CM_R CM_R
|
||||||
|
#define KC_CM_S CM_S
|
||||||
|
#define KC_CM_T CM_T
|
||||||
|
#define KC_CM_D CM_D
|
||||||
|
#define KC_CM_H CM_H
|
||||||
|
#define KC_CM_N CM_N
|
||||||
|
#define KC_CM_E CM_E
|
||||||
|
#define KC_CM_I CM_I
|
||||||
|
#define KC_CM_O CM_O
|
||||||
|
|
||||||
|
#define KC_CM_Z CM_Z
|
||||||
|
#define KC_CM_X CM_X
|
||||||
|
#define KC_CM_C CM_C
|
||||||
|
#define KC_CM_V CM_V
|
||||||
|
#define KC_CM_B CM_B
|
||||||
|
#define KC_CM_K CM_K
|
||||||
|
#define KC_CM_M CM_M
|
||||||
|
#define KC_CM_COMM CM_COMM
|
||||||
|
#define KC_CM_DOT CM_DOT
|
||||||
|
#define KC_CM_SLSH CM_SLSH
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,72 @@
|
|||||||
|
#ifndef KEYMAP_DVORAK_H
|
||||||
|
#define KEYMAP_DVORAK_H
|
||||||
|
|
||||||
|
#include "keymap_common.h"
|
||||||
|
|
||||||
|
// Normal characters
|
||||||
|
#define DV_GRV KC_GRV
|
||||||
|
#define DV_1 KC_1
|
||||||
|
#define DV_2 KC_2
|
||||||
|
#define DV_3 KC_3
|
||||||
|
#define DV_4 KC_4
|
||||||
|
#define DV_5 KC_5
|
||||||
|
#define DV_6 KC_6
|
||||||
|
#define DV_7 KC_7
|
||||||
|
#define DV_8 KC_8
|
||||||
|
#define DV_9 KC_9
|
||||||
|
#define DV_0 KC_0
|
||||||
|
#define DV_LBRC KC_MINS
|
||||||
|
#define DV_RBRC KC_EQL
|
||||||
|
|
||||||
|
#define DV_QUOT KC_Q
|
||||||
|
#define DV_COMM KC_W
|
||||||
|
#define DV_DOT KC_E
|
||||||
|
#define DV_P KC_R
|
||||||
|
#define DV_Y KC_T
|
||||||
|
#define DV_F KC_Y
|
||||||
|
#define DV_G KC_U
|
||||||
|
#define DV_C KC_I
|
||||||
|
#define DV_R KC_O
|
||||||
|
#define DV_L KC_P
|
||||||
|
#define DV_SLSH KC_LBRC
|
||||||
|
#define DV_EQL KC_RBRC
|
||||||
|
|
||||||
|
#define DV_A KC_A
|
||||||
|
#define DV_O KC_S
|
||||||
|
#define DV_E KC_D
|
||||||
|
#define DV_U KC_F
|
||||||
|
#define DV_I KC_G
|
||||||
|
#define DV_D KC_H
|
||||||
|
#define DV_H KC_J
|
||||||
|
#define DV_T KC_K
|
||||||
|
#define DV_N KC_L
|
||||||
|
#define DV_S KC_SCLN
|
||||||
|
#define DV_MINS KC_QUOT
|
||||||
|
|
||||||
|
#define DV_SCLN KC_Z
|
||||||
|
#define DV_Q KC_X
|
||||||
|
#define DV_J KC_C
|
||||||
|
#define DV_K KC_V
|
||||||
|
#define DV_X KC_B
|
||||||
|
#define DV_B KC_N
|
||||||
|
#define DV_M KC_M
|
||||||
|
#define DV_W KC_COMM
|
||||||
|
#define DV_V KC_DOT
|
||||||
|
#define DV_Z KC_SLSH
|
||||||
|
|
||||||
|
// Shifted characters
|
||||||
|
#define DV_TILD LSFT(DV_GRV)
|
||||||
|
#define DV_EXLM LSFT(DV_1)
|
||||||
|
#define DV_AT LSFT(DV_2)
|
||||||
|
#define DV_HASH LSFT(DV_3)
|
||||||
|
#define DV_DLR LSFT(DV_4)
|
||||||
|
#define DV_PERC LSFT(DV_5)
|
||||||
|
#define DV_CIRC LSFT(DV_6)
|
||||||
|
#define DV_AMPR LSFT(DV_7)
|
||||||
|
#define DV_ASTR LSFT(DV_8)
|
||||||
|
#define DV_LPRN LSFT(DV_9)
|
||||||
|
#define DV_RPRN LSFT(DV_0)
|
||||||
|
#define DV_LCBR LSFT(DV_LBRC)
|
||||||
|
#define DV_RCBR LSFT(DV_RBRC)
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -0,0 +1,36 @@
|
|||||||
|
#ifndef KEYMAP_UK_H
|
||||||
|
#define KEYMAP_UK_H
|
||||||
|
|
||||||
|
#include "keymap_common.h"
|
||||||
|
|
||||||
|
// Alt gr
|
||||||
|
#define ALGR(kc) kc | 0x1400
|
||||||
|
#define NO_ALGR KC_RALT
|
||||||
|
|
||||||
|
// Normal characters
|
||||||
|
#define UK_HASH KC_NUHS
|
||||||
|
|
||||||
|
#define UK_BSLS KC_NUBS
|
||||||
|
|
||||||
|
// Shifted characters
|
||||||
|
#define UK_NOT LSFT(KC_GRV)
|
||||||
|
#define UK_QUOT LSFT(KC_2)
|
||||||
|
#define UK_PND LSFT(KC_3)
|
||||||
|
|
||||||
|
#define UK_AT LSFT(KC_QUOT)
|
||||||
|
#define UK_TILD LSFT(KC_NUHS)
|
||||||
|
|
||||||
|
#define UK_PIPE LSFT(KC_NUBS)
|
||||||
|
|
||||||
|
// Alt Gr-ed characters
|
||||||
|
#define UK_BRKP ALGR(KC_GRV)
|
||||||
|
#define UK_EURO ALGR(KC_4)
|
||||||
|
|
||||||
|
#define UK_EACT ALGR(KC_E)
|
||||||
|
#define UK_UACT ALGR(KC_U)
|
||||||
|
#define UK_IACT ALGR(KC_I)
|
||||||
|
#define UK_OACT ALGR(KC_O)
|
||||||
|
|
||||||
|
#define UK_AACT ALGR(KC_A)
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in new issue