Pseudo-port the projects and dual role demos for possible later multi-arch support.

Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h

@@ -85,6 +85,39 @@
 //		#define NO_AUTO_VBUS_MANAGEMENT
 //		#define INVERTED_VBUS_ENABLE_LINE
 
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
 	#else
 
 		#error Unsupported architecture for this LUFA configuration file.

Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c

@@ -93,12 +93,24 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h

@@ -39,8 +39,9 @@
 
 		#include "Descriptors.h"
 
-		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c

@@ -68,12 +68,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	Serial_Init(9600, false);

Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h

@@ -50,6 +50,7 @@
 		#include <LUFA/Drivers/Board/Joystick.h>
 		#include <LUFA/Drivers/Board/Buttons.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 		#include "Descriptors.h"
 		#include "DeviceFunctions.h"

Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml

@@ -1,14 +1,14 @@
 <asf xmlversion="1.0">
-	<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example">
+	<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8">
 		<require idref="lufa.demos.dualrole.class.mouse"/>
 		<require idref="lufa.boards.dummy.avr8"/>
 		<generator value="as5_8"/>
 
 		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="usbkey"/>
+		<config name="lufa.drivers.board.name" value="none"/>
 
-		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="8000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
 	</project>
 
 	<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)">

Projects/AVRISP-MKII/AVRISP-MKII.c

@@ -63,12 +63,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/AVRISP-MKII/AVRISP-MKII.h

@@ -44,6 +44,7 @@
 
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 		#if defined(ADC)
 			#include <LUFA/Drivers/Peripheral/ADC.h>

Projects/Benito/Benito.c

@@ -171,10 +171,15 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#endif
+
 	/* Hardware Initialization */
 	LEDs_Init();
 	USB_Init();

Projects/Benito/Benito.h

@@ -48,6 +48,7 @@
 		#include <LUFA/Drivers/Peripheral/Serial.h>
 		#include <LUFA/Drivers/Misc/RingBuffer.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate TX activity. */

Projects/HIDReportViewer/HIDReportViewer.c

@@ -202,12 +202,14 @@ void OutputCollectionPath(const HID_CollectionPath_t* const CollectionPath)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	Serial_Init(9600, false);

Projects/HIDReportViewer/HIDReportViewer.h

@@ -49,6 +49,7 @@
 		#include <LUFA/Drivers/Peripheral/Serial.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Projects/LEDNotifier/LEDNotifier.c

@@ -142,12 +142,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/LEDNotifier/LEDNotifier.h

@@ -48,6 +48,7 @@
 
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Function Prototypes: */
 		void SetupHardware(void);

Projects/MIDIToneGenerator/MIDIToneGenerator.c

@@ -185,12 +185,14 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/MIDIToneGenerator/MIDIToneGenerator.h

@@ -49,6 +49,7 @@
 
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Projects/Magstripe/Magstripe.c

@@ -94,12 +94,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	Magstripe_Init();

Projects/Magstripe/Magstripe.h

@@ -49,6 +49,7 @@
 		#include "Config/AppConfig.h"
 
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** Total number of tracks which can be read from the card, between 1 and 3. */

Projects/MediaController/MediaController.c

@@ -80,12 +80,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware()
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	Joystick_Init();

Projects/MediaController/MediaController.h

@@ -50,6 +50,7 @@
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/Board/Buttons.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Projects/MissileLauncher/MissileLauncher.c

@@ -112,12 +112,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/MissileLauncher/MissileLauncher.h

@@ -49,6 +49,7 @@
 		#include <LUFA/Drivers/Board/Buttons.h>
 		#include <LUFA/Drivers/Board/Joystick.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Platform/Platform.h>
 
 		#include "ConfigDescriptor.h"
 

Projects/RelayBoard/RelayBoard.c

@@ -54,12 +54,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the project's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	USB_Init();

Projects/RelayBoard/RelayBoard.h

@@ -47,6 +47,7 @@
 
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		#define RELAY1      (1 << 7)

Projects/SerialToLCD/SerialToLCD.c

@@ -137,12 +137,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the application's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	USB_Init();

Projects/SerialToLCD/SerialToLCD.h

@@ -49,6 +49,7 @@
         #include <LUFA/Version.h>
         #include <LUFA/Drivers/Misc/RingBuffer.h>
         #include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		#define COMMAND_ESCAPE     0x1B

Projects/TempDataLogger/TempDataLogger.c

@@ -190,12 +190,14 @@ void CloseLogFile(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/TempDataLogger/TempDataLogger.h

@@ -55,6 +55,7 @@
 		#include <LUFA/Drivers/Board/Temperature.h>
 		#include <LUFA/Drivers/Peripheral/ADC.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Projects/USBtoSerial/USBtoSerial.c

@@ -145,12 +145,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	LEDs_Init();

Projects/USBtoSerial/USBtoSerial.h

@@ -48,6 +48,7 @@
 		#include <LUFA/Drivers/Peripheral/Serial.h>
 		#include <LUFA/Drivers/Misc/RingBuffer.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

Projects/Webserver/Webserver.c

@@ -60,12 +60,14 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Hardware Initialization */
 	SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);

Projects/Webserver/Webserver.h

@@ -47,6 +47,7 @@
 		#include <LUFA/Drivers/Board/Dataflash.h>
 		#include <LUFA/Drivers/Peripheral/SPI.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 		#include "USBDeviceMode.h"
 		#include "USBHostMode.h"

Projects/XPLAINBridge/XPLAINBridge.c

@@ -169,12 +169,14 @@ void UARTBridge_Task(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
+#if (ARCH == ARCH_AVR8)
 	/* Disable watchdog if enabled by bootloader/fuses */
 	MCUSR &= ~(1 << WDRF);
 	wdt_disable();
 
 	/* Disable clock division */
 	clock_prescale_set(clock_div_1);
+#endif
 
 	/* Disable JTAG debugging */
 	MCUCR |= (1 << JTD);

Projects/XPLAINBridge/XPLAINBridge.h

@@ -53,6 +53,7 @@
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/Misc/RingBuffer.h>
 		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */