Rename incorrectly named XPROGTarget_SendBreak() function to XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.

LUFA/ManPages/FutureChanges.txt

@@ -20,7 +20,6 @@
   *      -# Re-add interrupt Pipe/Endpoint support
   *      -# Add HID report macros to make HID report editing easier
   *      -# Investigate dynamically created device descriptors
-  *      -# Add new event for EVENT_USB_Device_ControlRequest() fired before the internal library request handlers
   *  - Documentation/Support
   *      -# Add detailed overviews of how each demo works
   *      -# Add board overviews

Projects/AVRISP-MKII/Lib/V2Protocol.h

@@ -37,6 +37,9 @@
 #define _V2_PROTOCOL_
 
 	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/interrupt.h>
+	
 		#include <LUFA/Drivers/USB/USB.h>
 
 		#include "../Descriptors.h"

Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c

@@ -59,9 +59,9 @@ void XPROGTarget_EnableTargetPDI(void)
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
-	/* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
-	XPROGTarget_SendBreak();
-	XPROGTarget_SendBreak();
+	/* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
+	XPROGTarget_SendIdle();
+	XPROGTarget_SendIdle();
 }
 
 /** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
@@ -83,9 +83,9 @@ void XPROGTarget_EnableTargetTPI(void)
 	UCSR1B = (1 << TXEN1);
 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
-	/* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
-	XPROGTarget_SendBreak();
-	XPROGTarget_SendBreak();
+	/* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+	XPROGTarget_SendIdle();
+	XPROGTarget_SendIdle();
 }
 
 /** Disables the target's PDI interface, exits programming mode and starts the target's application. */
@@ -156,14 +156,14 @@ uint8_t XPROGTarget_ReceiveByte(void)
 	return UDR1;
 }
 
-/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
-void XPROGTarget_SendBreak(void)
+/** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
+void XPROGTarget_SendIdle(void)
 {
 	/* Switch to Tx mode if currently in Rx mode */
 	if (!(IsSending))
 	  XPROGTarget_SetTxMode();
 	
-	/* Need to do nothing for a full frame to send a BREAK */
+	/* Need to do nothing for a full frame to send an IDLE */
 	for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
 	{
 		/* Wait for a full cycle of the clock */

Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h

@@ -115,7 +115,7 @@
 		void    XPROGTarget_DisableTargetTPI(void);
 		void    XPROGTarget_SendByte(const uint8_t Byte);
 		uint8_t XPROGTarget_ReceiveByte(void);
-		void    XPROGTarget_SendBreak(void);
+		void    XPROGTarget_SendIdle(void);
 		bool    XPROGTarget_WaitWhileNVMBusBusy(void);
 
 		#if (defined(INCLUDE_FROM_XPROGTARGET_C) && defined(ENABLE_XPROG_PROTOCOL))